Vista/Dragon! - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

Dougpug · 19-07-07, 10:28 PM

Hello there, I seem to being having difficulties with my interface for my Dragon cam.I'm new at this. I've been thru' the procedure with an old hand a couple of days ago and what I've done this evening seemed more or less familiar but I cannot seem to get the interface to work . All I get is 'cannot open Com1 port.' I also had 'extraction error when I downloaded the zip file but that eventually went.
Does this stuff work with Vista? Am I doing anything wrong with the interface connection to the laptop (usb). A quick run thru' with the set up from connections to actually putting the cam into the receiver would be very much appreciated. Thanks.

Mickha · 19-07-07, 11:13 PM

Hi Dougpug,
welcome to the forum.
Can you please post more details of your programmer so that we can ascertain if there are working Vista drivers for it. As you state that there is a problem with Cpm port 1, I assume you have a phoenix programmer and are trying to load a PIC F84a loader card, is this correct?
Does your computer have a dedicated COM port or are you using something like a USB to Serial adapter.
The more accurate information you can provide the better the chance of someone being able to help you.

nanochickin · 19-07-07, 11:16 PM

I found that very little seems to work correctly under Vista

I've gone back to dual booting FreeBSD and XP and everythings peachy again

Nano

Jimdefruit · 20-07-07, 09:06 AM

I have found that turning off the 'User Account Control' in Vista solves a lot of problems. Security is compromised and you have to suffer the warning on bootup but things run better.

Dougpug · 20-07-07, 07:27 PM

Hi there. In reply to Micha's request for more info re. Dragon Cam and Vista. I am using Dragon cam and CAS interface 3 plus, connection via USB. I now seem to have it all installed ok (I think).I have a red light and a green light on the interface and the device is recognised on the Dragon loader card window by it's serial number, as per the manual on the Duolabs website. So far so good.

The device manager looks ok (drivers in place etc) but where I am coming unstuck is that I cannot get any of the 'firmwear' so that I can write it to the loader card.

I just cannot see what I should be doing. Where I am today is an improvement on where I was this time yesterday but I want to be watching some successfully unencrypted TV channels!

So How do I get the data to load the card? If you can help please make it simple....thanks

BGonaSTICK · 20-07-07, 07:32 PM

You need to download the files from the Internet

One of these nice chaps will give you a clue where to find it

wod · 20-07-07, 08:23 PM

alsat has files for dragon cam

isn't there an update you can install for the cas 3 software ? have you tried duolabs website

19-07-07, 10:28 PM	#1 (permalink)
Dougpug Junior Member Join Date: Jul 2007 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Vista/Dragon! Hello there, I seem to being having difficulties with my interface for my Dragon cam.I'm new at this. I've been thru' the procedure with an old hand a couple of days ago and what I've done this evening seemed more or less familiar but I cannot seem to get the interface to work . All I get is 'cannot open Com1 port.' I also had 'extraction error when I downloaded the zip file but that eventually went. Does this stuff work with Vista? Am I doing anything wrong with the interface connection to the laptop (usb). A quick run thru' with the set up from connections to actually putting the cam into the receiver would be very much appreciated. Thanks.

19-07-07, 11:13 PM	#2 (permalink)
Mickha Super Moderator Join Date: Feb 2006 Posts: 1,271 Thanks: 3 Thanked 126 Times in 113 Posts	Re: Vista! Hi Dougpug, welcome to the forum. Can you please post more details of your programmer so that we can ascertain if there are working Vista drivers for it. As you state that there is a problem with Cpm port 1, I assume you have a phoenix programmer and are trying to load a PIC F84a loader card, is this correct? Does your computer have a dedicated COM port or are you using something like a USB to Serial adapter. The more accurate information you can provide the better the chance of someone being able to help you.

19-07-07, 11:16 PM	#3 (permalink)
nanochickin Satellite Super Moderator Join Date: Aug 2006 Location: In a house Posts: 3,250 Thanks: 13 Thanked 91 Times in 84 Posts	Re: Vista! I found that very little seems to work correctly under Vista I've gone back to dual booting FreeBSD and XP and everythings peachy again Nano __________________

20-07-07, 09:06 AM	#4 (permalink)
Jimdefruit Super Moderator Join Date: Jan 2006 Posts: 2,627 Thanks: 10 Thanked 80 Times in 75 Posts	Re: Vista! I have found that turning off the 'User Account Control' in Vista solves a lot of problems. Security is compromised and you have to suffer the warning on bootup but things run better. __________________ Dreambox 7000s + VBox + Channel Master 1.2 with 36v actuator CM120 feedhorn and Invacom .3 LNB Skystar 2 PCI card with links to my Dreambox If you like what you see here, tell your friends.

20-07-07, 07:27 PM	#5 (permalink)
Dougpug Junior Member Join Date: Jul 2007 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Vista! Hi there. In reply to Micha's request for more info re. Dragon Cam and Vista. I am using Dragon cam and CAS interface 3 plus, connection via USB. I now seem to have it all installed ok (I think).I have a red light and a green light on the interface and the device is recognised on the Dragon loader card window by it's serial number, as per the manual on the Duolabs website. So far so good. The device manager looks ok (drivers in place etc) but where I am coming unstuck is that I cannot get any of the 'firmwear' so that I can write it to the loader card. I just cannot see what I should be doing. Where I am today is an improvement on where I was this time yesterday but I want to be watching some successfully unencrypted TV channels! So How do I get the data to load the card? If you can help please make it simple....thanks


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

20-07-07, 07:32 PM	#6 (permalink)
BGonaSTICK Super Murderator Join Date: Nov 2005 Location: Brighton Posts: 10,609 Thanks: 3 Thanked 49 Times in 33 Posts	Re: Vista! You need to download the files from the Internet One of these nice chaps will give you a clue where to find it __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

20-07-07, 08:23 PM	#7 (permalink)
wod Senior Member Join Date: Mar 2007 Posts: 1,878 Thanks: 5 Thanked 22 Times in 21 Posts	Re: Vista/Dragon! alsat has files for dragon cam isn't there an update you can install for the cas 3 software ? have you tried duolabs website __________________ Vantage x221tsci, tms-1500ci+, skystar 2, diablo v2.3 zone 2 minidish 28e - setanta