Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums - View Single Post

Mickha · 05-08-08, 06:06 PM

I'm surprised you couldn't get hold of a null modem cable, you can pick them up very cheaply from any sat shop on the internet, check the sponsors.
If your computer hasn't gor a dedicated serial port you will also need a USB-Serial adapter.
With your Diablo 2.2 you can open the following main packages:
Premiere 19E
Polsat 13E
Digi TV 1W
If you upgrade your Cam, over the internet, to 2.3 you can also open DigitAlb 16E and Canal Digital 1W.
Check lyngsat for the full channels available on each package.
How to programme your Diablo:
Download Underworld 127.
Chack the sticky threads in the Satellites Help & Support section for where to download.
Download and install CIS 8.5 for your Cas 3 programmer from duolabs.
Insert your Diablo Cam into your Cas 3.
Start up the CIS software.
Click on the Cam Module tab and the two Diablo Cam icons, this starts the Diablo software.
Click on the little icon with 3 dots at the end of the File Name address bar.
Navigate to underworld127.dup and click open
The Start Update icon should now have a green light.
Click the Start Update icon and wait for it to complete
Once finished return your cam to your receiver.
Go into the Cams menu, Underworld 127 and the cConfiguration option.
Ensure Emulators is ON and N2 AU is ON.
Please post back if you have any problems.

05-08-08, 06:06 PM	#2 (permalink)
Mickha Super Moderator Join Date: Feb 2006 Posts: 4,799 Thanks: 42 Thanked 1,203 Times in 850 Posts	Re: help with satellite terms I'm surprised you couldn't get hold of a null modem cable, you can pick them up very cheaply from any sat shop on the internet, check the sponsors. If your computer hasn't gor a dedicated serial port you will also need a USB-Serial adapter. With your Diablo 2.2 you can open the following main packages: Premiere 19E Polsat 13E Digi TV 1W If you upgrade your Cam, over the internet, to 2.3 you can also open DigitAlb 16E and Canal Digital 1W. Check lyngsat for the full channels available on each package. How to programme your Diablo: Download Underworld 127. Chack the sticky threads in the Satellites Help & Support section for where to download. Download and install CIS 8.5 for your Cas 3 programmer from duolabs. Insert your Diablo Cam into your Cas 3. Start up the CIS software. Click on the Cam Module tab and the two Diablo Cam icons, this starts the Diablo software. Click on the little icon with 3 dots at the end of the File Name address bar. Navigate to underworld127.dup and click open The Start Update icon should now have a green light. Click the Start Update icon and wait for it to complete Once finished return your cam to your receiver. Go into the Cams menu, Underworld 127 and the cConfiguration option. Ensure Emulators is ON and N2 AU is ON. Please post back if you have any problems.