[sajjid]

if its showing LD30 then LD20 then its your network id , you need to set the correct network id using funcard.

1. unplug the box
2. holding the following four button
power + ok + < + > power up the box untill you see LD06 then let go and box will reset but this will also reset the network id to 0999 aswell.
3. create the files with Net id setter .
4. program the card fun or atmega
5. now unplug the box again but this time hold the up and down key and powerup the box untill you see LD14 then let go.
when you see the blue screen ajust the freq and pin and move the next screen where you see the net id now insert the card.
box will reboot and new network id and pin will be set.
if you need the net id setter here is the link.
its a rapid link remove - in the link because i cannot post links
rapid-share-com/files/134858456/NetIDv2.1.7.2.rar