|
Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers
|
|
|
|
#11 (permalink) |
|
Senior Member
Join Date: Feb 2007
Location: S.Wales
Posts: 877
Thanks: 62
Thanked 32 Times in 25 Posts
|
Thats half the battle if you have a good meter, try and post more details up of what the meter is.
Does it identify what sat your on etc? Is your new dish being installed in the same place as your 60cm?
__________________
Gregorian 1.2m & 55cm dish`s,Gibertini 1.5m on a Jeagar 1224 H 2 H motor.Dreambox,7025 200GB HD. Vbox II.Skystar 2 PCI card, 42" Plasma tv. |
|
|
|
|
|
#12 (permalink) |
|
Member
Join Date: Aug 2007
Posts: 95
Thanks: 0
Thanked 0 Times in 0 Posts
|
The original set up was..... 60CM dish, LNB, Technomate 1500CI+.... this was used on Hotbird to give me ART sports. I now want Eutelsat 16'E so I am using the same set-up. First I used the 60CM dish, where I was able to pick up anything from Astra 23'E - Hotbird 13'E, but NOT Eutelsat (no signal at all for it). So, I switched the dish for a 100cm dish, thinking this would cure the problem. But with the 100cm dish i cannot find a signal for ANY satellite. The meter I am using detects specific satellites.
__________________
bob_e70@hotmail.com<br /><br />Dymchurch, Kent |
|
|
|
|
|
#13 (permalink) |
|
Member
Join Date: Aug 2007
Posts: 95
Thanks: 0
Thanked 0 Times in 0 Posts
|
All i can tell you about the meter is that is fairly large, about 10 inches in length and 6 inches wide. It sits in a velcro case and has a recharable battery (which takes about 12 hours to recharge). There is an LCD display at the top of the meter and about 5 large round buttons on the front. I think the buttons are, Menu, Up, Down, On and Off. HTH?
__________________
bob_e70@hotmail.com<br /><br />Dymchurch, Kent |
|
|
|
|
|
#15 (permalink) |
|
Super Moderator
|
The 100 cm dish may have a different offset than the 60 cm dish. If so, the elevation will need to be adjusted up or down. If the arm was supplied with the dish then it will be the correct length.
__________________
Dreambox 800 HD; Dreambox 7000s + VBox + Channel Master 1.2 with 36v actuator CM120 feedhorn and Invacom .3 LNB Skystar 2 PCI card with links to my Dreambox If you like what you see here, tell your friends.
|
|
|
|
|
|
#16 (permalink) | |
|
Member
Join Date: Aug 2007
Posts: 95
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
__________________
bob_e70@hotmail.com<br /><br />Dymchurch, Kent |
|
|
|
|
|
|
#17 (permalink) | |
|
Member
Join Date: Aug 2007
Posts: 95
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
__________________
bob_e70@hotmail.com<br /><br />Dymchurch, Kent |
|
|
|
|
|
|
#18 (permalink) |
|
Super Moderator
Join Date: Jan 2006
Location: Workington, Cumbria
Posts: 1,002
Thanks: 1
Thanked 2 Times in 2 Posts
|
Any chance of uploading a photo of you're dish set up?
This might give us a bit more of an idea of what's going on m8 ![]() Kev
__________________
1m CM, feedhorn + Invacom C120 Quad, 36v Jaeger 128 motor, TM 6900 HD + 160gb HDD, TM 1500 CI+ Super, Skystar 2, DigitAlb Gold, Samsung 40F86BDX LCD |
|
|
|
|
|
#20 (permalink) | |
|
Member
Join Date: Aug 2007
Posts: 95
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
I will get a photo of my situation up ASAP....
__________________
bob_e70@hotmail.com<br /><br />Dymchurch, Kent |
|
|
|
|