DS 3v3 firmware released - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Unknown user #1 · 30-08-07, 05:34 PM

h**p://dsteam.cwispy.com/itgate/forum/index.php?showtopic=832

Note: this firmware is based on Technomate v10 firmware, so if you have v09 in flash and using iBoot, its very likely there will be a lots of issues.

wod · 30-08-07, 09:04 PM

i can i load this the normal way using the technomate control center ?

have you loaded it as i dont have iboot on my 9100, does it work in the flash ?

whats the verdict as ur image isn't impressing me at the moment

wod

Unknown user #1 · 30-08-07, 09:14 PM

I haven't tried it yet as I am waiting for official v10 to be released. Then I'll put it into flash and install DS3v3 on SD card.
Not sure when I'll do it as I am really busy now... but certainly will try. Eventually.

As to UR, Beta2 is working fine for me, no complaints (almost). It seems to be very stable, and the biggest problem I've got is inability to pause recorded video (sounds crazy, isn't it?).

BTW, iboot is a really good software - I have several firmwares on it now. Try it

SD cards cost next to nothing these days, you can pick up 1GB card from Staples for 6.99!

wod · 31-08-07, 08:49 AM

going to try this image on the receiver tonight as i have my other one setup, so can play around with this one now

wod · 02-09-07, 06:58 PM

trying to load this and getting message on control center 6 of C:\document and settings\shaun\desktop\ds_32v2_tm9100_update\ds_32 v2_tm9100_update\dags_arial.fnt does not exist

so what is all that about ?

wod · 02-09-07, 10:41 PM

being a bit thick today as realised just to use the flashtools files from another image say 009 original and it has loaded up fine

BGonaSTICK · 02-09-07, 11:36 PM

Let us know what you think of it.

...and what's wrong with it.

Analoguesat · 03-09-07, 02:23 PM

Therss some very good comments about DS3v3 firmware over on the DS forum

_http://www.digitalspy.co.uk/forums/showthread.php?t=657929

basically says its made the box much more stable

Unknown user #1 · 03-09-07, 02:43 PM

The stability issue is an interesting subject to be honest. It seems that some boxes are more prone to reboots/hangs/whatever and some boxes aren't. For example, uptime on my TM9100 is 21 day (basically is never rebooted since I installed URb4 image. I might try DS image some day in future but I'll wait for official v10 and put that to flash first.

Jimdefruit · 03-09-07, 05:39 PM

I ran up one problem with the Dreambox version. I keep getting the message that the system is recording when it isn't. I would be interested to hear if that happens on the 9100 version with or without a recorder.

30-08-07, 05:34 PM	#1 (permalink)
Unknown user #1 Senior Member Join Date: Jan 2007 Posts: 536 Thanks: 0 Thanked 0 Times in 0 Posts	DS 3v3 firmware released h**p://dsteam.cwispy.com/itgate/forum/index.php?showtopic=832 Note: this firmware is based on Technomate v10 firmware, so if you have v09 in flash and using iBoot, its very likely there will be a lots of issues.

30-08-07, 09:04 PM	#2 (permalink)
wod Senior Member Join Date: Mar 2007 Posts: 2,299 Thanks: 18 Thanked 93 Times in 82 Posts	Re: DS 3v3 firmware released i can i load this the normal way using the technomate control center ? have you loaded it as i dont have iboot on my 9100, does it work in the flash ? whats the verdict as ur image isn't impressing me at the moment wod

30-08-07, 09:14 PM	#3 (permalink)
Unknown user #1 Senior Member Join Date: Jan 2007 Posts: 536 Thanks: 0 Thanked 0 Times in 0 Posts	Re: DS 3v3 firmware released I haven't tried it yet as I am waiting for official v10 to be released. Then I'll put it into flash and install DS3v3 on SD card. Not sure when I'll do it as I am really busy now... but certainly will try. Eventually. As to UR, Beta2 is working fine for me, no complaints (almost). It seems to be very stable, and the biggest problem I've got is inability to pause recorded video (sounds crazy, isn't it?). BTW, iboot is a really good software - I have several firmwares on it now. Try it SD cards cost next to nothing these days, you can pick up 1GB card from Staples for 6.99!

31-08-07, 08:49 AM	#4 (permalink)
wod Senior Member Join Date: Mar 2007 Posts: 2,299 Thanks: 18 Thanked 93 Times in 82 Posts	Re: DS 3v3 firmware released going to try this image on the receiver tonight as i have my other one setup, so can play around with this one now

02-09-07, 06:58 PM	#5 (permalink)
wod Senior Member Join Date: Mar 2007 Posts: 2,299 Thanks: 18 Thanked 93 Times in 82 Posts	Re: DS 3v3 firmware released trying to load this and getting message on control center 6 of C:\document and settings\shaun\desktop\ds_32v2_tm9100_update\ds_32 v2_tm9100_update\dags_arial.fnt does not exist so what is all that about ?

02-09-07, 10:41 PM	#6 (permalink)
wod Senior Member Join Date: Mar 2007 Posts: 2,299 Thanks: 18 Thanked 93 Times in 82 Posts	Re: DS 3v3 firmware released being a bit thick today as realised just to use the flashtools files from another image say 009 original and it has loaded up fine

02-09-07, 11:36 PM	#7 (permalink)
BGonaSTICK Dodgy Geezer Join Date: Nov 2005 Location: Brighton Posts: 9,718 Thanks: 3 Thanked 163 Times in 57 Posts	Re: DS 3v3 firmware released Let us know what you think of it. ...and what's wrong with it. __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

03-09-07, 02:23 PM	#8 (permalink)
Analoguesat manic midlander retired mod Join Date: Jan 2006 Location: Scottish Borders Posts: 11,668 Thanks: 21 Thanked 1,334 Times in 985 Posts	Re: DS 3v3 firmware released Therss some very good comments about DS3v3 firmware over on the DS forum _http://www.digitalspy.co.uk/forums/showthread.php?t=657929 basically says its made the box much more stable __________________ Basic forum rules for both satellite & cable: no keys no patches no offering or asking for card shares Anyone pm'ing me for details of card sharing or anything to do with hacking cable will be banned immediately Analogue forever!!

03-09-07, 02:43 PM	#9 (permalink)
Unknown user #1 Senior Member Join Date: Jan 2007 Posts: 536 Thanks: 0 Thanked 0 Times in 0 Posts	Re: DS 3v3 firmware released The stability issue is an interesting subject to be honest. It seems that some boxes are more prone to reboots/hangs/whatever and some boxes aren't. For example, uptime on my TM9100 is 21 day (basically is never rebooted since I installed URb4 image. I might try DS image some day in future but I'll wait for official v10 and put that to flash first.

03-09-07, 05:39 PM	#10 (permalink)
Jimdefruit Super Moderator Join Date: Jan 2006 Posts: 2,858 Thanks: 20 Thanked 221 Times in 187 Posts	Re: DS 3v3 firmware released I ran up one problem with the Dreambox version. I keep getting the message that the system is recording when it isn't. I would be interested to hear if that happens on the 9100 version with or without a recorder. __________________ Dreambox 800 HD; Dreambox 7000s + VBox + Channel Master 1.2 with 36v actuator CM120 feedhorn and Invacom .3 LNB Skystar 2 PCI card with links to my Dreamboxes If you like what you see here, tell your friends.