1.5m IRTE Camo Dish - Page 3 - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

$ly · 07-09-07, 12:11 PM

Yes they're tiny aren't they. Don't be fooled, it's a great LNB.
Yes just bolt it directly to the feedhorn and forget the polariser.

Keep us informed.

L.

jontydog · 07-09-07, 03:53 PM

Motor is now wired up and working

Still haven't worked out what those things are in the last picture though. Just soaked the inside of the arm things with WD40 as they are a bit rusty.

BGonaSTICK · 07-09-07, 11:33 PM

On your spare part, is the ID about the same as the actuator OD?

jasper · 07-09-07, 11:43 PM

I take it I set up the same way from 1 degree west?
[/quote]
A good place to start, or you could do it the way i do it,and point the mount to the sun at 11am (but dont tell the others,they will only laugh !),you should be some where near with the arc.

Quote:

Originally Posted by jontydog

Oh forgot to ask what are these for and where do they fit? Don't you just love it when you take things and put them back together and always have bits left over

Sorry can not think where they are from

jontydog · 08-09-07, 02:27 AM

Well those bits are still on the table in the garden and the dish is up and running so I don't know where they go at all. Just need the stand tightening completely and bolting to the floor then line it up. On my H to H motor I can tell when the motor is in the middle by the gauge how do I tell with the Jaeger as there are no markings on it at all or is it all guess work?

$ly · 08-09-07, 08:58 AM

I've always done it by eye and got it pretty spot on (at least the results tell me that).
You could measure from the edge of the dish to a suitable pont on the motor body, but a few mm either way won't hurt as it transfers as only a few microns out to the elevation if you see what I mean.

PICTURES PICTURES, WE WANT PICTURES.
And some reception reports

Ta.

L.

wod · 08-09-07, 12:31 PM

would nice to see some pics

so your other have didn't hit the roof when she saw the size of it ?

once you have the new lnb on it and aligned you should have no problem getting feeds,

also try the dish on 7west

jontydog · 08-09-07, 03:06 PM

going to have a play shortly only just got up. Portable telly is out ready. The Mrs was a bit upset at first and her mates are taking the pi55 but she is getting used to it. Few pics attached I have just taken even have the washing blowing in the breeze

The bottom one is the old 80cm motorised set up in the corner.

crossbones · 08-09-07, 03:31 PM

Looking good mate!

Tell the mrs that the microwaves from the dish will help dry the clothes :roflmao:

ops:

wod · 08-09-07, 03:43 PM

very nice, jontydog

the dish looks in good condition, i thought someone said it had dents in it, i don't see any

07-09-07, 12:11 PM	#21 (permalink)
$ly Super Moderator Join Date: Feb 2006 Location: Out There Posts: 496 Thanks: 1 Thanked 2 Times in 2 Posts	Re: 1.5m IRTE Camo Dish Yes they're tiny aren't they. Don't be fooled, it's a great LNB. Yes just bolt it directly to the feedhorn and forget the polariser. Keep us informed. L.

07-09-07, 03:53 PM	#22 (permalink)
jontydog Super Moderator Join Date: Feb 2006 Posts: 1,217 Thanks: 0 Thanked 5 Times in 5 Posts	Re: 1.5m IRTE Camo Dish Motor is now wired up and working Still haven't worked out what those things are in the last picture though. Just soaked the inside of the arm things with WD40 as they are a bit rusty. __________________ TM 1000D Super. SS2 PCI. Echosmart Dsb 791 1M Dish. Edon 2120 Positioner. 80cm Mesh Dish Motorised. 28E to 30W

07-09-07, 11:33 PM	#23 (permalink)
BGonaSTICK Super Murderator Join Date: Nov 2005 Location: Brighton Posts: 10,626 Thanks: 3 Thanked 53 Times in 34 Posts	Re: 1.5m IRTE Camo Dish On your spare part, is the ID about the same as the actuator OD? __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

08-09-07, 02:27 AM	#25 (permalink)
jontydog Super Moderator Join Date: Feb 2006 Posts: 1,217 Thanks: 0 Thanked 5 Times in 5 Posts	Re: 1.5m IRTE Camo Dish Well those bits are still on the table in the garden and the dish is up and running so I don't know where they go at all. Just need the stand tightening completely and bolting to the floor then line it up. On my H to H motor I can tell when the motor is in the middle by the gauge how do I tell with the Jaeger as there are no markings on it at all or is it all guess work? __________________ TM 1000D Super. SS2 PCI. Echosmart Dsb 791 1M Dish. Edon 2120 Positioner. 80cm Mesh Dish Motorised. 28E to 30W

08-09-07, 08:58 AM	#26 (permalink)
$ly Super Moderator Join Date: Feb 2006 Location: Out There Posts: 496 Thanks: 1 Thanked 2 Times in 2 Posts	Re: 1.5m IRTE Camo Dish I've always done it by eye and got it pretty spot on (at least the results tell me that). You could measure from the edge of the dish to a suitable pont on the motor body, but a few mm either way won't hurt as it transfers as only a few microns out to the elevation if you see what I mean. PICTURES PICTURES, WE WANT PICTURES. And some reception reports Ta. L.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

08-09-07, 12:31 PM	#27 (permalink)
wod Senior Member Join Date: Mar 2007 Posts: 1,898 Thanks: 6 Thanked 22 Times in 21 Posts	Re: 1.5m IRTE Camo Dish would nice to see some pics so your other have didn't hit the roof when she saw the size of it ? once you have the new lnb on it and aligned you should have no problem getting feeds, also try the dish on 7west __________________ Vantage x221tsci, tms-1500ci+, skystar 2, diablo v2.3 zone 2 minidish 28e - setanta

08-09-07, 03:06 PM	#28 (permalink)
jontydog Super Moderator Join Date: Feb 2006 Posts: 1,217 Thanks: 0 Thanked 5 Times in 5 Posts	Re: 1.5m IRTE Camo Dish going to have a play shortly only just got up. Portable telly is out ready. The Mrs was a bit upset at first and her mates are taking the pi55 but she is getting used to it. Few pics attached I have just taken even have the washing blowing in the breeze The bottom one is the old 80cm motorised set up in the corner. __________________ TM 1000D Super. SS2 PCI. Echosmart Dsb 791 1M Dish. Edon 2120 Positioner. 80cm Mesh Dish Motorised. 28E to 30W

08-09-07, 03:31 PM	#29 (permalink)
crossbones Senior Member Join Date: Feb 2007 Location: S.Wales Posts: 762 Thanks: 41 Thanked 22 Times in 16 Posts	Re: 1.5m IRTE Camo Dish Looking good mate! Tell the mrs that the microwaves from the dish will help dry the clothes :roflmao: ops: __________________ Gregorian 1.2m & 90cm & 55cm dish`s.Dreambox,7025 200GB HD. Vbox II.Skystar 2 PCI card, 42" Plasma tv.

08-09-07, 03:43 PM	#30 (permalink)
wod Senior Member Join Date: Mar 2007 Posts: 1,898 Thanks: 6 Thanked 22 Times in 21 Posts	Re: 1.5m IRTE Camo Dish very nice, jontydog the dish looks in good condition, i thought someone said it had dents in it, i don't see any __________________ Vantage x221tsci, tms-1500ci+, skystar 2, diablo v2.3 zone 2 minidish 28e - setanta