Backing up and Restoring the channel list on your Technomate 1000 series - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

robbo71 · 11-10-07, 11:34 PM

First of all, you need to obtain the loader software for your box. For this guide I have used the official version, but the unnofficial version shown in Patching your Technomate 1000 series

Click on 'TM-1000 Loader, save to your hard disk, then unzip it ready for use.

[b] Connect your receiver to you computer using the 9pin null modem c@ble and switch it on.

Then run the file 'TMLoader.exe' that you just unzipped.

TO SAVE A COPY OF YOUR CHANNELS TO YOUR PC

Click the Channels tab and select Upload .You then have to click browse and enter a filename to save to

Now press Auto detect and the the following will confirm that you are connected, press Exit

Now press the 'connect' button and click on start when the pop-up appears

The channel list will then be uploaded to your PC

When it has finished the following will be displayed. Press 'Finish'

Congratulations you have now backed up your channel list to your PC

TO RESTORE YOUR CHANNEL LIST FROM YOUR PC TO YOUR BOX

Assuming that you're all connected up and the Loader is running as before. Click on the 'Channels' tab and select 'Download'.Then browse for your channel file (.ndf) and select it.

Then press 'Connect' and 'Start' when the pop-up appears.

The channel list will then download to the box, and show 'sending'

When it has finished, the following will appear. The box will reset, and the LED panel will show 'FFFF'. If the TV is connected to the box there may be a buzzing sound and a black screen for a little while. Click on 'Finish'

The box should then spring back into life

Congratulations you have now restored the channels to your box

BGonaSTICK · 14-10-07, 12:27 PM

Excellent stuff Robbo :clap:

You're a credit to the forum and everything we stand for

robbo71 · 18-10-07, 11:22 PM

PICS for 1st post

robbo71 · 18-10-07, 11:28 PM

more pics

robbo71 · 27-10-07, 04:40 PM

last pic

kafagan55 · 03-06-08, 04:43 PM

hi robbo i tried to upload channel ndf it uploads to the computer at the end of the process i get a message saying cant create the file any ideas?
regards
kevin fagan

11-10-07, 11:34 PM	#1 (permalink)
robbo71 Super Moderator Join Date: Jul 2007 Location: Kent Posts: 4,590 Thanks: 21 Thanked 396 Times in 383 Posts	Backing up and Restoring the channel list on your Technomate 1000 series First of all, you need to obtain the loader software for your box. For this guide I have used the official version, but the unnofficial version shown in Patching your Technomate 1000 series Click on 'TM-1000 Loader, save to your hard disk, then unzip it ready for use. [b] Connect your receiver to you computer using the 9pin null modem c@ble and switch it on. Then run the file 'TMLoader.exe' that you just unzipped. TO SAVE A COPY OF YOUR CHANNELS TO YOUR PC Click the Channels tab and select Upload .You then have to click browse and enter a filename to save to Now press Auto detect and the the following will confirm that you are connected, press Exit Now press the 'connect' button and click on start when the pop-up appears The channel list will then be uploaded to your PC When it has finished the following will be displayed. Press 'Finish' Congratulations you have now backed up your channel list to your PC TO RESTORE YOUR CHANNEL LIST FROM YOUR PC TO YOUR BOX Assuming that you're all connected up and the Loader is running as before. Click on the 'Channels' tab and select 'Download'.Then browse for your channel file (.ndf) and select it. Then press 'Connect' and 'Start' when the pop-up appears. The channel list will then download to the box, and show 'sending' When it has finished, the following will appear. The box will reset, and the LED panel will show 'FFFF'. If the TV is connected to the box there may be a buzzing sound and a black screen for a little while. Click on 'Finish' The box should then spring back into life Congratulations you have now restored the channels to your box Last edited by robbo71; 01-11-07 at 07:36 AM.

14-10-07, 12:27 PM	#2 (permalink)
BGonaSTICK Super Murderator Join Date: Nov 2005 Location: Brighton Posts: 10,626 Thanks: 3 Thanked 53 Times in 34 Posts	Re: Backing up and Restoring the channel list on your Technomate 1000 series Excellent stuff Robbo :clap: You're a credit to the forum and everything we stand for __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

03-06-08, 04:43 PM	#6 (permalink)
kafagan55 Junior Member Join Date: Mar 2008 Posts: 11 Thanks: 1 Thanked 1 Time in 1 Post	Re: Backing up and Restoring the channel list on your Technomate 1000 series hi robbo i tried to upload channel ndf it uploads to the computer at the end of the process i get a message saying cant create the file any ideas? regards kevin fagan


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|