Mod Truman for SL65(B1-6pin) - Page 6 - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

BGonaSTICK · 27-10-07, 02:21 AM

Er, opening a shop?!?!

:clap:

twojags · 27-10-07, 10:15 AM

Is there any difference between the firmware in *.abs format than *.bin format? The reason I ask is for loading via Jtag instead of RS232 for the S1003 which doesn't have one. Could you just change the extension and load it via Jtag?

andysly · 27-10-07, 10:22 AM

as i have never used a jtag setup b4 i would not honesty say...but you have the right kit if you brick the box to recover it....
have you tryed the sl65_a mod bin file ?

twojags · 27-10-07, 10:56 AM

No I haven't tried it as the Truman seems pretty good with the AU & Prem. Is the SL65aMod bin file better? I/ve just tried your autoscan fixed 1.3.78 on the SL65/12 and it's scanning now without crashing. Nice work. Once I've scanned all the sats I'll backup it up via Jtag as a bin file and flash it to the S1003. Of course I could just try changing the extension and see what happens.....

I'm sure I've used a file comparison program before to compare patch files but I can't remember what it was called.

chavestroter · 26-11-07, 04:58 PM

I've got silvercrest sl65.I patched with truman .there is no channels signal.
The connection and cables are fine,work with the other receiver.Please can
anyone tell me what to do?maybe i need software modified.Can anyone post for me?
Thanks

solunauk · 26-11-07, 07:56 PM

Quote:

Originally Posted by chavestroter

I've got silvercrest sl65.I patched with truman .there is no channels signal.
The connection and cables are fine,work with the other receiver.Please can
anyone tell me what to do?maybe i need software modified.Can anyone post for me?

Please read carefully these threads from beginning to end:

Mod Truman for SL65(B1-6pin)

Comag SL65_B1 to Yumatu 190x IQ

They should help you to get things sorted. If not, please come back here.

Sol

twojags · 26-11-07, 08:00 PM

What firmware did you use and what chips does your receiver have? Look under the heatsink and also it may help to know what the other chips say on them.

Also the original Truman files often don't have any channels stored so you need to go to the channel menu and scan for channels.

Regards

Twojags

chavestroter · 26-11-07, 08:33 PM

I've got Silvercrest SL65 /ALI -M3329-B1/6 pin .I downloaded from German site truman emu
1.3.79 and worked.Polsat au,tps au,premiere au,but left with problem on display.I tried another one that says d+ au and wasn't compatible and now downloaded
again 1.3.79 and says no signals.I tried everything.The program got already channels.
But says no signals.Another thing I can see is when I download anything to the receiver,the display does not flash how used to be.Please I need help.
Thanks

solunauk · 27-11-07, 10:47 AM

Quote:

Originally Posted by chavestroter

now downloaded
again 1.3.79 and says no signals.I tried everything.The program got already channels. But says no signals.Another thing I can see is when I download anything to the receiver,the display does not flash how used to be.Please I need help.

When you loaded 1.3.79 for the second time did you select allcode+bootloader in the drop-down list of the loader? That may make a difference. D+ is not AU on any firmware as far as I know, so don't chase after that.

Good luck!
Sol

twojags · 27-11-07, 11:27 AM

I don't think the display works with the Truman mod.

Does your remote work?
When you switch on the receiver using the remote do the menus and tv display work? If they do then it sounds like it has loaded ok.
Daft question but have you checked the sat cable is connected to lnb IN not OUT?
Check the channels your trying to look at are for the same satellite your dish is pointed at and use a free to air channel such as Premiere Direkt on Astra1 19.2E
You could also try a fresh channel scan

Regards

Twojags

27-10-07, 02:21 AM	#51 (permalink)
BGonaSTICK Super Murderator Join Date: Nov 2005 Location: Brighton Posts: 10,632 Thanks: 3 Thanked 62 Times in 36 Posts	Re: Mod Truman for SL65(B1-6pin) Er, opening a shop?!?! :clap: __________________ Dreambox 7000, Skystar2 PCI, Skystar USB, Fibo 90cm on Moteck SG2100, Triax TD110 multi-LNB. Sky + ART cards. 45.0°E - 58.0°W

27-10-07, 10:15 AM	#52 (permalink)
twojags Member Join Date: Oct 2007 Posts: 32 Thanks: 0 Thanked 1 Time in 1 Post	Re: Mod Truman for SL65(B1-6pin) Is there any difference between the firmware in .abs format than .bin format? The reason I ask is for loading via Jtag instead of RS232 for the S1003 which doesn't have one. Could you just change the extension and load it via Jtag?

27-10-07, 10:22 AM	#53 (permalink)
andysly Senior Member Join Date: Aug 2007 Location: southwest uk Posts: 178 Thanks: 4 Thanked 3 Times in 3 Posts	Re: Mod Truman for SL65(B1-6pin) as i have never used a jtag setup b4 i would not honesty say...but you have the right kit if you brick the box to recover it.... have you tryed the sl65_a mod bin file ?

27-10-07, 10:56 AM	#54 (permalink)
twojags Member Join Date: Oct 2007 Posts: 32 Thanks: 0 Thanked 1 Time in 1 Post	Re: Mod Truman for SL65(B1-6pin) No I haven't tried it as the Truman seems pretty good with the AU & Prem. Is the SL65aMod bin file better? I/ve just tried your autoscan fixed 1.3.78 on the SL65/12 and it's scanning now without crashing. Nice work. Once I've scanned all the sats I'll backup it up via Jtag as a bin file and flash it to the S1003. Of course I could just try changing the extension and see what happens..... I'm sure I've used a file comparison program before to compare patch files but I can't remember what it was called.

26-11-07, 04:58 PM	#55 (permalink)
chavestroter Junior Member Join Date: Sep 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Mod Truman for SL65(B1-6pin) I've got silvercrest sl65.I patched with truman .there is no channels signal. The connection and cables are fine,work with the other receiver.Please can anyone tell me what to do?maybe i need software modified.Can anyone post for me? Thanks


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

26-11-07, 08:00 PM	#57 (permalink)
twojags Member Join Date: Oct 2007 Posts: 32 Thanks: 0 Thanked 1 Time in 1 Post	Re: Mod Truman for SL65(B1-6pin) What firmware did you use and what chips does your receiver have? Look under the heatsink and also it may help to know what the other chips say on them. Also the original Truman files often don't have any channels stored so you need to go to the channel menu and scan for channels. Regards Twojags

26-11-07, 08:33 PM	#58 (permalink)
chavestroter Junior Member Join Date: Sep 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Mod Truman for SL65(B1-6pin) I've got Silvercrest SL65 /ALI -M3329-B1/6 pin .I downloaded from German site truman emu 1.3.79 and worked.Polsat au,tps au,premiere au,but left with problem on display.I tried another one that says d+ au and wasn't compatible and now downloaded again 1.3.79 and says no signals.I tried everything.The program got already channels. But says no signals.Another thing I can see is when I download anything to the receiver,the display does not flash how used to be.Please I need help. Thanks Last edited by chavestroter; 26-11-07 at 08:37 PM. Reason: I forgot to add a word

27-11-07, 11:27 AM	#60 (permalink)
twojags Member Join Date: Oct 2007 Posts: 32 Thanks: 0 Thanked 1 Time in 1 Post	Re: Mod Truman for SL65(B1-6pin) I don't think the display works with the Truman mod. Does your remote work? When you switch on the receiver using the remote do the menus and tv display work? If they do then it sounds like it has loaded ok. Daft question but have you checked the sat cable is connected to lnb IN not OUT? Check the channels your trying to look at are for the same satellite your dish is pointed at and use a free to air channel such as Premiere Direkt on Astra1 19.2E You could also try a fresh channel scan Regards Twojags Last edited by twojags; 27-11-07 at 11:29 AM.