how to update sammy 2100

[reddiesel]

Originally Posted by jazzy_d

can any1 send me the new bytes for xcw 3_5b please.

PM sent.

[spikebaby]

Originally Posted by reddiesel

Slacky to update it hold Standbye > left > right > ok buttons in and power up till ld5 then let go wait about a good 10min for it to update, then use byte 0f69af8 8 in ocd.
ird is called nagra serial code you have to convert it to hex, leave last two numbers out.

not quite right mate sorry to be a pain
plug box in hold left right and the up button ld14 appears then count to 10 then let go this will force the box to update to latest software
as for latest
byte 0x20020004 4 ird
byte 0x00f69f60 8 bk

jtag while on stream m ate this will give you the correct bk

[reddiesel]

Originally Posted by spikebaby

not quite right mate sorry to be a pain
plug box in hold left right and the up button ld14 appears then count to 10 then let go this will force the box to update to latest software
as for latest
byte 0x20020004 4 ird
byte 0x00f69f60 8 bk

jtag while on stream m ate this will give you the correct bk

Thats the way i always do it m8, does your way not reset the net id and pin, thats handy if so for people in c&w.
In ocd you leave 0x0 off.

[spikebaby]

Originally Posted by reddiesel

Thats the way i always do it m8, does your way not reset the net id and pin, thats handy if so for people in c&w.
In ocd you leave 0x0 off.

no mate as stanby button is not used.....this will make it update to the latest platform or software .if no update mods are done

[les123]

Originally Posted by spikebaby

not quite right mate sorry to be a pain
plug box in hold left right and the up button ld14 appears then count to 10 then let go this will force the box to update to latest software
as for latest
byte 0x20020004 4 ird
byte 0x00f69f60 8 bk

jtag while on stream m ate this will give you the correct bk

held left right and up and waited 10 seconds after ld14 but went back to ld20 after let go ?