Image flashing problems

[phileanne]

Hi, I have a box that will not boot up.
All i get on the LCD is betaresearch digital broadcast solutions and it dosent budge!
Have tried using IFA but all i get is this:

debhttp://Hallenberg.com lay loop... debug: DDF: 10
.5627ÿ7 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.524367 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.524367 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.5627ÿ7 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.524367 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.524367 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.524367 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.524367 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop... debug: DDF: 10
.5627ÿ7 BogoMIPS
------ Extra Informations ------
Selected Network adapter: VIA Compatable Fast Ethernet Adapter - Packet Scheduler Miniport (0)
IP-Adress of the Network Adapter: 192.168.1.2
IP-Adress of the Dbox: 192.168.1.202
Comport: Communications Port (COM1)
Operatingsystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) XP 2200+ @ 1666 MHz
Filename of the Images: Blade Trinity Final Nokia 2x.img
Imagetype: Two Flashs
DBOX-IFA Version: 2.3
------ Powered by Hallenberg.com dbox2 Linux Umbau Service Neutrino d-box d-box2 ------

Could anybody help?
If it is easier i am willing to pay somebody to talk me through it on the phone, or if someone is in the Gloucester area and is willing to help.

Many thanks

[humforce]

all the research i have done haveing had one do same is the main processor has gone .

on lcd betaresearch and just one block below.?

[Shaddax]

Originally Posted by humforce

all the research i have done haveing had one do same is the main processor has gone .

on lcd betaresearch and just one block below.?

Well any remote / blind diagnosis on a Dbox is always rather hit and miss but I would be surprised if this is a processor failure.
Try typing "Boot net" at the point where your Dbox output stops ie at the end of all the BogoMIPS stuff.
As this is indeed output information from your Dbox I can't see how the main processor could have failed.
The last time this happened to me I used Dbox Manager to sort it out, at work now so don't have all relevant info to hand but this forum has excellent tutorials.

[johny48]

hi m8
make sure all firewalls are off or dissabled and any anti virus software is dissabled as this can cause errors hope this helps.
cheers johny48