writting funcard for pace 4000n

[hantsmale]

ive jtagged pace 4000n got id and bk and have written them to funcard
when trying to update box i gets errors 11 12 and 20 have i wrote card wrong?
i used chaos v3 for flash and toxic 7 for bk ird

[reddiesel]

You need to set frequency and net id, pull red jumper and set freq and pin in eng menu, you need to use net id file on funcard first, and then reprogramme card to how you have now, (unless you have a spare card). Read the net id funcard tut.

[hantsmale]

when powering up after taking red jumper off should the frequency changed to what it set to because mine stays the same only thing i have to put in is password ..
ive tried about six times to reset the box but still no joy

[reddiesel]

Freq may be ok, but you need to set net id to your area, if you download net id final editor v2 your net id code may be in the list, if not you will have to find out what it is, if you know someone with a box nearbye look in their eng menu.

[hantsmale]

ive got that ....i ment frequency doesnt change inside box after i pull off the red jumper the only thing that changes is password and i presume thats same as wht you write on card 1234