4010 Jtag points are pins?!? - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

turboman · 23-11-07, 12:16 AM

Just got my pogo tag for my 4010. The jtag points are the pins like you put jumpers on. I haven't seen this in any pics before.
Is it factory, or has someone put it there? looks like a good job if they have.

reddiesel · 23-11-07, 12:39 AM

Are you sure your looking at the jtag points, the tuts are in downloads with pics.

turboman · 23-11-07, 08:23 AM

Yep. 100%. Says PL5300 next to it, and theay are number 1 and 2 on the left, 9 and 10 on the right.
The only thing that resembles the jtag points are near the card reader.

reddiesel · 23-11-07, 08:42 AM

Oh i know what you mean, maybe you could snip them off low down instead of desoldering for your pogo.

turboman · 23-11-07, 08:48 AM

Yeah, will do that.
Have you seen it before then?

turboman · 23-11-07, 10:24 AM

Keep getting "PC to target cable Disconnected" in SDT2100. Mac MOT is running.
Dodgy JTAG?

MORSTE · 23-11-07, 11:48 AM

its because you are not getting a good enough connection.

reddiesel · 23-11-07, 12:22 PM

have you enabled lpt1 in device manager ? oc commander may be the best to use, you need the bytes for your area.

turboman · 23-11-07, 01:08 PM

Yeah LPT1 is enabled.
I'd go with the connection thing, but tried a few times. Or do I have to boot up the box each time I attempt the make the connection, ie: if its not connected, move the pogo's, reboot box?

Anyway, its seems the box is screwed now, it only shows half a 1 digit on the screen, top half, then bottom half etc.
It won't go into engineers mode or anything now.
What have I done?

slacky · 23-11-07, 01:50 PM

might have a short circuit some where

23-11-07, 12:16 AM	#1 (permalink)
turboman Member Join Date: Nov 2007 Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	4010 Jtag points are pins?!? Just got my pogo tag for my 4010. The jtag points are the pins like you put jumpers on. I haven't seen this in any pics before. Is it factory, or has someone put it there? looks like a good job if they have.

23-11-07, 12:39 AM	#2 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,594 Thanks: 27 Thanked 178 Times in 167 Posts	Re: 4010 Jtag points are pins?!? Are you sure your looking at the jtag points, the tuts are in downloads with pics.

23-11-07, 08:23 AM	#3 (permalink)
turboman Member Join Date: Nov 2007 Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	Re: 4010 Jtag points are pins?!? Yep. 100%. Says PL5300 next to it, and theay are number 1 and 2 on the left, 9 and 10 on the right. The only thing that resembles the jtag points are near the card reader.

23-11-07, 08:42 AM	#4 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,594 Thanks: 27 Thanked 178 Times in 167 Posts	Re: 4010 Jtag points are pins?!? Oh i know what you mean, maybe you could snip them off low down instead of desoldering for your pogo.

23-11-07, 08:48 AM	#5 (permalink)
turboman Member Join Date: Nov 2007 Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	Re: 4010 Jtag points are pins?!? Yeah, will do that. Have you seen it before then?


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

23-11-07, 10:24 AM	#6 (permalink)
turboman Member Join Date: Nov 2007 Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	Re: 4010 Jtag points are pins?!? Keep getting "PC to target cable Disconnected" in SDT2100. Mac MOT is running. Dodgy JTAG?

23-11-07, 11:48 AM	#7 (permalink)
MORSTE Member Join Date: Nov 2007 Posts: 37 Thanks: 2 Thanked 0 Times in 0 Posts	Re: 4010 Jtag points are pins?!? its because you are not getting a good enough connection.

23-11-07, 12:22 PM	#8 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,594 Thanks: 27 Thanked 178 Times in 167 Posts	Re: 4010 Jtag points are pins?!? have you enabled lpt1 in device manager ? oc commander may be the best to use, you need the bytes for your area.

23-11-07, 01:08 PM	#9 (permalink)
turboman Member Join Date: Nov 2007 Posts: 44 Thanks: 0 Thanked 0 Times in 0 Posts	Re: 4010 Jtag points are pins?!? Yeah LPT1 is enabled. I'd go with the connection thing, but tried a few times. Or do I have to boot up the box each time I attempt the make the connection, ie: if its not connected, move the pogo's, reboot box? Anyway, its seems the box is screwed now, it only shows half a 1 digit on the screen, top half, then bottom half etc. It won't go into engineers mode or anything now. What have I done?

23-11-07, 01:50 PM	#10 (permalink)
slacky Senior Member Join Date: Apr 2007 Posts: 482 Thanks: 1 Thanked 13 Times in 13 Posts	Re: 4010 Jtag points are pins?!? might have a short circuit some where

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JTAG Points	lincsat	Cable TV Chat	41	27-05-08 08:50 PM
2110 JTag points	RRForums	Cable TV Chat	23	17-10-07 04:42 PM
jtag	gooner1810	Cable TV Chat	20	27-09-07 03:17 PM
Pace 4010 BK from IRD database jtag not working	paul001	Cable TV Chat	5	19-06-07 10:31 AM
Samsung JTAG Problems	mrowley	Cable TV Chat	2	22-09-06 05:08 PM