czech tv - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

epeterkova · 23-11-07, 08:56 PM

hi. i have recently had a czech satellite system installed, it is set up to astra 23 but i can not get the czech channels even though iam getting good signal from the satellite. does anyone know if i have a big enough dish, i have a 90cm dish at the moment.

skytel · 23-11-07, 09:06 PM

where abouts are you

epeterkova · 23-11-07, 10:00 PM

thanks for replying. iam in bury st edmunds, suffolk.

skytel · 23-11-07, 10:09 PM

i get it all on a 88cm you may need to fine tune it a bit and adjust the skew to optimise your signal

Robbo · 23-11-07, 10:11 PM

Astra 1E at 23.5°E - LyngSat Maps

You should be getting the ones off the 1E beam as the UK is well covered by that beam.

FlySat Czech TV Channels

Not sure about the 3A beam, looks like its centred right on Germany.

Astra 3A at 23.5°E - LyngSat Maps

But you could be lucky.

BlackHawk · 23-11-07, 10:21 PM

No problem with fta Czeck channels on 23.5east here on the outskirts of Ipswich, Suffolk
10862H OCKO TV
11992H PUBLICK TV showing a test card
12525V CT24 & TV NOE
12649H OCKO TV & TOP TV
BlackHawk
PS. I suggest that you get your installer back to do a proper job, and give you the channels that you want. Suffolk trading standards are in Ipswich.
BH.
PPS Welcome to Techwatch.

skytel · 23-11-07, 10:24 PM

Suffolk should require the same size dish as my area,i get it very good with a 80cm fixed dish for other people in essex

epeterkova · 23-11-07, 10:24 PM

ive just checked i have an 80cm dish, do you think i need a larger dish.
can you pick up CT1, 2 Nova and Prima ?

skytel · 23-11-07, 10:26 PM

Quote:

Originally Posted by epeterkova

ive just checked i have an 80cm dish, do you think i need a larger dish.
can you pick up CT1, 2 Nova and Prima ?

are you motorised

epeterkova · 24-11-07, 03:46 PM

no it is not

23-11-07, 08:56 PM	#1 (permalink)
epeterkova Junior Member Join Date: Nov 2007 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	czech tv hi. i have recently had a czech satellite system installed, it is set up to astra 23 but i can not get the czech channels even though iam getting good signal from the satellite. does anyone know if i have a big enough dish, i have a 90cm dish at the moment.

23-11-07, 09:06 PM	#2 (permalink)
skytel Junior Member Join Date: Nov 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: czech tv where abouts are you

23-11-07, 10:00 PM	#3 (permalink)
epeterkova Junior Member Join Date: Nov 2007 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Re: czech tv thanks for replying. iam in bury st edmunds, suffolk.

23-11-07, 10:09 PM	#4 (permalink)
skytel Junior Member Join Date: Nov 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: czech tv i get it all on a 88cm you may need to fine tune it a bit and adjust the skew to optimise your signal

23-11-07, 10:11 PM	#5 (permalink)
Robbo Super Moderator Join Date: Jul 2007 Location: Kent Posts: 5,012 Thanks: 27 Thanked 471 Times in 454 Posts	Re: czech tv Astra 1E at 23.5°E - LyngSat Maps You should be getting the ones off the 1E beam as the UK is well covered by that beam. FlySat Czech TV Channels Not sure about the 3A beam, looks like its centred right on Germany. Astra 3A at 23.5°E - LyngSat Maps But you could be lucky. __________________ كيبل اعضاء البلهاء TM6800,TM1000D.Triax TD110 on STABHH-90 motor.Orbital 1m on Moteck motor+2 x minidishes DigitAlb movie package. Electronics Engineer and satellite installer.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

23-11-07, 10:21 PM	#6 (permalink)
BlackHawk Satellite Help member Join Date: Nov 2006 Location: Suffolk, ENGLAND Posts: 169 Thanks: 2 Thanked 5 Times in 5 Posts	Re: czech tv No problem with fta Czeck channels on 23.5east here on the outskirts of Ipswich, Suffolk 10862H OCKO TV 11992H PUBLICK TV showing a test card 12525V CT24 & TV NOE 12649H OCKO TV & TOP TV BlackHawk PS. I suggest that you get your installer back to do a proper job, and give you the channels that you want. Suffolk trading standards are in Ipswich. BH. PPS Welcome to Techwatch. __________________ Smart 0.2dB LNB, 1m Gibby dish, Stab HH100 motor, 10m co-ax, TM1000D, TM1500CI+super & TM 5200D USB boxes (modified). 57east to 61west. Last edited by BlackHawk; 23-11-07 at 10:27 PM.

23-11-07, 10:24 PM	#7 (permalink)
skytel Junior Member Join Date: Nov 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: czech tv Suffolk should require the same size dish as my area,i get it very good with a 80cm fixed dish for other people in essex

23-11-07, 10:24 PM	#8 (permalink)
epeterkova Junior Member Join Date: Nov 2007 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Re: czech tv ive just checked i have an 80cm dish, do you think i need a larger dish. can you pick up CT1, 2 Nova and Prima ?

24-11-07, 03:46 PM	#10 (permalink)
epeterkova Junior Member Join Date: Nov 2007 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Re: czech tv no it is not

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
czech tv	tomasgeorge	Satellite Help & Support	12	30-11-07 09:14 PM
Czech music channel Ocko to cease off 19E	Analoguesat	Satellite News	0	31-10-07 03:11 PM
Czech Republic prepares for HD	BGonaSTICK	Terrestrial Television	1	06-07-07 02:19 AM
Re: Need tv channels for a foreign wife - Czech	Weeman3	Satellite TV for a Foreign Spouse	8	21-01-07 10:14 PM
Czech Republic makes plans to switch off analogue transmitters	Analoguesat	Satellite News	0	02-05-06 06:36 PM