Truman 1.3.80

[TBX]

Ive use the "Opticum Toolbox 1.5b" upload is by Nachtfalke.
All Progz in one good Tool for B1. ALIMINIUPGVr.4.0 is good but i try this.

[twojags]

I've used Opticum Toolbox too and agree it's handy having it all in one. I don't know why miniupgrade didn't work. It's strange. Anyway it's fine now and channel changing is fine too.

When using the full DVB Upgrade software I never know what to do after the first flash. It prompts you to load next or finish. I've clicked next and switched the box on and off again with the remote because I thought it was loading the bootloader and allcode separately but do I actually need to or do I just switch off after it loads and burns?

Regards

Twojags

[solunauk]

Twojags, I've always let the FW load and burn fully, press Finished when it says Next and then power off and on at the mains, then on with the remote. If you select allcode+bootloader then it does the two at the same time.

[TrumanCapote]

Hi!
Just to remember that to update our receiver when a new Truman firm comes out, only we have to do is to upload the new firm(after fixed) in the option "maincode(AV)" in order to maintain our data (channels list, keys, configurations).Off course that this is only applicable when we already have a Truman mod on our receiver. I use the uploader of the official support.
Gretings.

[twojags]

thanks guys. That's cleared it up for me.

[TBX]

This is an Software from the offiziell Site!!
And now I have made a update with a 1A Channellist for Astra and Hotbird.
The Filename is !!! NEW TRUMAN 1.3.80 B1!!! die 2te von TBX.zip see in Upload 5

- Prem***
- Prem*** Star
- Prem*** Sport
- Prem*** Buli
- Prem*** Direkt
- Prem*** Formel 1
- Prem*** XXX
- Astra 19,2
- Hotbird 13.0
- Taqu***
- Multi***
- Kinder
- Musik

Zugewiesene Fav. sind Prem**,Prem*** Star, Prem*** Direkt, Prem*** Sport/Buli, Taqu***, Kids, Music, XXX
Alpen**** und Enta*** sind auch mit drin. Bootlogo und Radiologo sind geändert wegen der Ansicht.
Soooo wem´s gefällt bidde schön wenn nicht vorher Dump machen und eigene wieder drüber.

LG TBX

[solunauk]

Truman Amstar 1.3.81 is now out, on truman-support. Pr*m, P*lsat, T P S AU.

Will need patching with Ali Universal-Fixer 0.9b of course.

I may not try it yet since Pr*m is still AU with 1.3.80 for me.

Sol

[andysly]

Originally Posted by solunauk

Truman Amstar 1.3.81 is now out, on truman-support. Pr*m, P*lsat, T P S AU.

Will need patching with Ali Universal-Fixer 0.9b of course.

I may not try it yet since Pr*m is still AU with 1.3.80 for me.

Sol

i just uploaded the patch to my rx and it seams to be all ok.
no lock up's and everyting that can be cleared is clearing.


sly

[solunauk]

Originally Posted by andysly

i just uploaded the patch to my rx and it seams to be all ok.
no lock up's and everyting that can be cleared is clearing.
sly

Same here. One thing I'm noticing, though (and this was the same for 1.3.80), is that there is no sound at all on some of the Pr*m channels. When I press the red button and go into Audio, there's no tick by "Deu", but a tick below it against nothing, and the tick can't be moved. This is true even for some US films which would normally have both German and English audio options, but there's only one option and it can't be selected - hence, no sound!

Only a small irritation, though.

[TBX]

Guys please keep the 1.3.80 of your Box the 1.3.81 is unstabil and have a lot of bugs.

LG TBX