New prog

[jamie1984]

hey guys i have made some progress with the advice of gordon earlier on now when i read card i get this:

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 34 4C
ROM Revision: 011
EEPROM Revision: RevB04
ProviderID: 5C
CamID: 24 70 90 E3
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

can someone translate this please

[gordongop]

Originally Posted by jamie1984

hey guys i have made some progress with the advice of gordon earlier on now when i read card i get this:

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 34 4C
ROM Revision: 011
EEPROM Revision: RevB04
ProviderID: 5C
CamID: 24 70 90 E3
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

can someone translate this please

The card is locked .. u will need an unloper to open it up.

Not sure how easy B04's are to open a I havent had any at the time of writing.

But if using a prussian2/funcard 4 then there is an easier way of reading it and editing the card.

you will need to do the card in the correct order or you can lose the flash and have to hunt for one that works (that part is from experiance)

1 ... Put prussian2/funcard 4 in reader.

2 ... read the flash first and then save it on comp.
3 ... read internal and save
4 ... read external and save

5 ... use swapbinhex to turn the external hex file into a bin file.
6 ... open up nagraedit and load card image (choose the external.bin file)
if a box pops up select rom 11 as image type.

7 ... click on dataeditor in nagaedit and it should show u the card info.

once you've finished editing you will have to save the image on comp.

8 ... rename the nagraedit image from bn11 to bin
9 ... in inf software load the flash u saved earlier
10 ... load the internal you saved earlier
11 ... load the new external you save with nagaredit.

12 ... Press write on software.

[reddiesel]

Originally Posted by jamie1984

hey guys i have made some progress with the advice of gordon earlier on now when i read card i get this:

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 34 4C
ROM Revision: 011
EEPROM Revision: RevB04
ProviderID: 5C
CamID: 24 70 90 E3
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

can someone translate this please

Jamie try reading with xncs, open ,click settings and tick all options except ghost must be in eeprom, now click green reset button, once card details are displayed click read card, now click eeprom tab and scroll down through the eeprom dump untill you find C040 and C070 these are the back door keys, note these , then open nagra edit 4.1 and try both keys.

[ronlkh]

Anyone has boxgetPC for MOSC?

[Marc]

Why not use nagraedit/?? is the card locked?? if so then youll need an unlooper

Marc

[shadsone]

Hi been looking around, cant seem to find anything on how to do a mosc card with rom10,i have the ird and the bk,what do i do next

[Marc]

Ive replied to the other post you made mate,
Marc