Samsung BK using OCD and JTAG - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

madadd · 22-12-07, 05:30 PM

Hi All

I have being using JTAG to extract the BK on a samsung 2100c box.

I used Box Key Extractor v2.2 first, this gave me an ird and BK, but the IRD was incorrect, i checked this against the IRD in the Engineers menu.

The fun card i created would not work at all, so i converted the IRD serial number from Eng menu to ird Key, it now recognises the funcard, but wont update, so no channels.

I believe the BK i have is incorrect.

I now using OCD commander, going to BYTE 02004000 ff gives the IRD and BK for the Pace boxs

What Byte reference would give the BK for the Samsung boxes ?

Thaks for all ya help.

Madadd

ronster · 22-12-07, 05:38 PM

what area r u its different bytes for different suppliers
these are the bytes i use ex cw
For BK
excw 3_5B
0x0086b9a0 8
or
0x008abfc0 8
or
0x00f69f60 8
IRD for all
0x20020004 4

madadd · 22-12-07, 06:13 PM

I have used the info from 0x20020004 ff

it gives the following

>byte 20020004 ff
20020004: 3E 4* 4* E* 25 1* DE 0* F7 ** B* 0F 6B AC 94 A1

I have used the first 4 for the ird, which matches the IRD serial from the ENG menu, then the next for the BK. Now some channels are decoding, eg bbc1-3 channel 4, channel 5 etc, but not any of the sky.

Any Ideas ?

I am using the Chaos V3 flash file. i have used this on several boxes, both pace and samsung and it has never taken more than 5mins to decode all channels.

thanks

ronster · 22-12-07, 07:51 PM

youve only highlighted 14 digits for the bk,is this intentional to protect your bk as it should be 16 digits

check what software version youve got, the above bytes are for version 3_5

reddiesel · 22-12-07, 10:39 PM

Quote:

Originally Posted by madadd

I have used the info from 0x20020004 ff

it gives the following

>byte 20020004 ff
20020004: 3E 4* 4* E* 25 1* DE 0* F7 ** B* 0F 6B AC 94 A1

I have used the first 4 for the ird, which matches the IRD serial from the ENG menu, then the next for the BK. Now some channels are decoding, eg bbc1-3 channel 4, channel 5 etc, but not any of the sky.

Any Ideas ?

I am using the Chaos V3 flash file. i have used this on several boxes, both pace and samsung and it has never taken more than 5mins to decode all channels.

thanks

What area are you in ? 20020004 is just for ird. if ronsters bytes didnt work you must be in different area and need those bytes, the nagra ird from eng menu you have to convert to hex and starts with 3E on a sammy.

madadd · 23-12-07, 03:40 PM

Hi All

Im in area 00008, I have no idea where the BK would be located.

Any more memory address i can try ?

Build version is 3_5L_01_P07N_S_S2100

All the software for BK extraction dosent work, i am trying the software on a sammy that i know the BK and cannot find it using samdebug tool, BKE 2.2 or OCD.

Help Help

reddiesel · 23-12-07, 05:29 PM

PM sent.

omer_jee · 26-12-07, 06:55 PM

hi
i am having exactly same problem as madadd, reddiesel. any help possoble!

can't get bk, tried all program known. got ird.

reddiesel · 27-12-07, 02:23 AM

Quote:

Originally Posted by omer_jee

hi
i am having exactly same problem as madadd, reddiesel. any help possoble!

can't get bk, tried all program known. got ird.

What area are you pure, C&W, TW,? you need the right bytes.

omer_jee · 28-12-07, 12:02 AM

hi
i am trying jtag, where do i get win xp driver for jtag?
i have bke2.2,
what other program do i need?
also do i need to connect cable input to samsung 2100?

22-12-07, 05:30 PM	#1 (permalink)
madadd Member Join Date: Oct 2007 Posts: 59 Thanks: 0 Thanked 0 Times in 0 Posts	Samsung BK using OCD and JTAG Hi All I have being using JTAG to extract the BK on a samsung 2100c box. I used Box Key Extractor v2.2 first, this gave me an ird and BK, but the IRD was incorrect, i checked this against the IRD in the Engineers menu. The fun card i created would not work at all, so i converted the IRD serial number from Eng menu to ird Key, it now recognises the funcard, but wont update, so no channels. I believe the BK i have is incorrect. I now using OCD commander, going to BYTE 02004000 ff gives the IRD and BK for the Pace boxs What Byte reference would give the BK for the Samsung boxes ? Thaks for all ya help. Madadd

22-12-07, 05:38 PM	#2 (permalink)
ronster Senior Member Join Date: Jan 2007 Location: Here Posts: 1,382 Thanks: 36 Thanked 411 Times in 173 Posts	Re: Samsung BK using OCD and JTAG what area r u its different bytes for different suppliers these are the bytes i use ex cw For BK excw 3_5B 0x0086b9a0 8 or 0x008abfc0 8 or 0x00f69f60 8 IRD for all 0x20020004 4 Last edited by ronster; 22-12-07 at 05:46 PM.

22-12-07, 06:13 PM	#3 (permalink)
madadd Member Join Date: Oct 2007 Posts: 59 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Samsung BK using OCD and JTAG I have used the info from 0x20020004 ff it gives the following >byte 20020004 ff 20020004: 3E 4* 4* E* 25 1* DE 0* F7 ** B* 0F 6B AC 94 A1 I have used the first 4 for the ird, which matches the IRD serial from the ENG menu, then the next for the BK. Now some channels are decoding, eg bbc1-3 channel 4, channel 5 etc, but not any of the sky. Any Ideas ? I am using the Chaos V3 flash file. i have used this on several boxes, both pace and samsung and it has never taken more than 5mins to decode all channels. thanks Last edited by madadd; 22-12-07 at 07:04 PM.

22-12-07, 07:51 PM	#4 (permalink)
ronster Senior Member Join Date: Jan 2007 Location: Here Posts: 1,382 Thanks: 36 Thanked 411 Times in 173 Posts	Re: Samsung BK using OCD and JTAG youve only highlighted 14 digits for the bk,is this intentional to protect your bk as it should be 16 digits check what software version youve got, the above bytes are for version 3_5 Last edited by ronster; 22-12-07 at 07:56 PM.

23-12-07, 03:40 PM	#6 (permalink)
madadd Member Join Date: Oct 2007 Posts: 59 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Samsung BK using OCD and JTAG Hi All Im in area 00008, I have no idea where the BK would be located. Any more memory address i can try ? Build version is 3_5L_01_P07N_S_S2100 All the software for BK extraction dosent work, i am trying the software on a sammy that i know the BK and cannot find it using samdebug tool, BKE 2.2 or OCD. Help Help Last edited by madadd; 23-12-07 at 03:44 PM.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

23-12-07, 05:29 PM	#7 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 3,505 Thanks: 60 Thanked 359 Times in 328 Posts	Re: Samsung BK using OCD and JTAG PM sent.

26-12-07, 06:55 PM	#8 (permalink)
omer_jee Technology Forums Join Date: Dec 2007 Posts: 23 Thanks: 1 Thanked 0 Times in 0 Posts	Re: Samsung BK using OCD and JTAG hi i am having exactly same problem as madadd, reddiesel. any help possoble! can't get bk, tried all program known. got ird.

28-12-07, 12:02 AM	#10 (permalink)
omer_jee Technology Forums Join Date: Dec 2007 Posts: 23 Thanks: 1 Thanked 0 Times in 0 Posts	Re: Samsung BK using OCD and JTAG hi i am trying jtag, where do i get win xp driver for jtag? i have bke2.2, what other program do i need? also do i need to connect cable input to samsung 2100?