samsung 2100c ld:20/ld:30 - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

framer · 09-01-08, 01:53 PM

hello
my sammy box is flicking between ld 20 and 30 on startup,i have left this on for hours and it does not update..
the netid is correct for my area,the signal is good and the frequaency is correct..
my smart card status stays on "please wait" maybe it could be the wrong box key?
the ird and key are written ontop of the box,i got the box off somebody else,all i have done is programmed a funcard 4 with an apollo using the charlie senator tut

help plz peeps!

framer · 09-01-08, 02:03 PM

i wrote the card with funmagic in this way:

open myexteep - program - clear

open myinteep - program - clear

open myflash - program - clear

open myinteep - program - clear

i had restore flash and restore internal eeprom unicked in the jobs to do

external eeprom set to 25lc256 32 kbytes

on startup all i get is a ntl screen,i do not know if this is right as it has switched to virgin..

spikebaby · 09-01-08, 03:38 PM

check your cable feed in ld20 is a signal error....

framer · 09-01-08, 04:25 PM

Quote:

Originally Posted by spikebaby

check your cable feed in ld20 is a signal error....

how can i do this pal? in the engineers menu it says signal good,attenuation low,that is the only way of checking it that i know of.

thanks

reddiesel · 09-01-08, 08:18 PM

What area are you in pure or c&w , ? are you sure net id is right ?

javed · 09-01-08, 09:37 PM

hi mate i had the same problem befor. you need to short the bettery and then set the correct net id. after downloading the new software it will start working. this problem most likely occurs when the net id is not rpogrammed correctly

framer · 09-01-08, 09:46 PM

area is bolton which is ntl and net id is 41060 which is correct i believe.

thanks javed i will try that.i take it the battery is under the hood so i will need the correct screwdriver to open ?

cheers

framer · 09-01-08, 09:58 PM

yes found the battery on a picture.need to find a screwdriver for it..

cheers

reddiesel · 09-01-08, 11:06 PM

just short battery with a piece of wire for 20 secs, power off.

spikebaby · 10-01-08, 08:47 AM

Quote:

Originally Posted by framer

area is bolton which is ntl and net id is 41060 which is correct i believe.

thanks javed i will try that.i take it the battery is under the hood so i will need the correct screwdriver to open ?

cheers

41060 is x c/w net id should be 666.750.you will either have to j-tag for net id or use fun files

09-01-08, 01:53 PM	#1 (permalink)
framer Junior Member Join Date: Dec 2007 Posts: 17 Thanks: 0 Thanked 0 Times in 0 Posts	samsung 2100c ld:20/ld:30 hello my sammy box is flicking between ld 20 and 30 on startup,i have left this on for hours and it does not update.. the netid is correct for my area,the signal is good and the frequaency is correct.. my smart card status stays on "please wait" maybe it could be the wrong box key? the ird and key are written ontop of the box,i got the box off somebody else,all i have done is programmed a funcard 4 with an apollo using the charlie senator tut help plz peeps!

09-01-08, 02:03 PM	#2 (permalink)
framer Junior Member Join Date: Dec 2007 Posts: 17 Thanks: 0 Thanked 0 Times in 0 Posts	Re: samsung 2100c ld:20/ld:30 i wrote the card with funmagic in this way: open myexteep - program - clear open myinteep - program - clear open myflash - program - clear open myinteep - program - clear i had restore flash and restore internal eeprom unicked in the jobs to do external eeprom set to 25lc256 32 kbytes on startup all i get is a ntl screen,i do not know if this is right as it has switched to virgin.. Last edited by framer; 09-01-08 at 02:17 PM.

09-01-08, 03:38 PM	#3 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: samsung 2100c ld:20/ld:30 check your cable feed in ld20 is a signal error....

09-01-08, 08:18 PM	#5 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: samsung 2100c ld:20/ld:30 What area are you in pure or c&w , ? are you sure net id is right ?

09-01-08, 09:37 PM	#6 (permalink)
javed Techwatch Reader Join Date: Mar 2007 Location: Kashmir Posts: 393 Thanks: 6 Thanked 6 Times in 6 Posts	Re: samsung 2100c ld:20/ld:30 hi mate i had the same problem befor. you need to short the bettery and then set the correct net id. after downloading the new software it will start working. this problem most likely occurs when the net id is not rpogrammed correctly

09-01-08, 09:46 PM	#7 (permalink)
framer Junior Member Join Date: Dec 2007 Posts: 17 Thanks: 0 Thanked 0 Times in 0 Posts	Re: samsung 2100c ld:20/ld:30 area is bolton which is ntl and net id is 41060 which is correct i believe. thanks javed i will try that.i take it the battery is under the hood so i will need the correct screwdriver to open ? cheers

09-01-08, 09:58 PM	#8 (permalink)
framer Junior Member Join Date: Dec 2007 Posts: 17 Thanks: 0 Thanked 0 Times in 0 Posts	Re: samsung 2100c ld:20/ld:30 yes found the battery on a picture.need to find a screwdriver for it.. cheers

09-01-08, 11:06 PM	#9 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: samsung 2100c ld:20/ld:30 just short battery with a piece of wire for 20 secs, power off.