NEW ATmega card - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

nickold · 13-01-08, 10:52 AM

This is my 1st post so "Hello To All"
I am a beginner (noob)
I have:-
samsung 2100c ntl/virgin box (chipped but lost original atmega card) in BB3 area
bk-known
i think its called ird number (8digit?)-known
network key-unknown
atmega card- ATmega163+24c256- brand new and blank
infinity USB unlimited programmer
3E ** ** 1D
25 C1 ** ** ** ** 74 DB
these numbers are taped to bottom of chipped box
this i think is the ird+ bk number @ do these look ok @ ive swapped some numbers with * becuase i dont know if this is secure info and will gladly give you the full numbers if required
upto yet ive

1. used toxic7 and put my ird + bk number in the relevent place and put a tick in NTL, saved as exteep.bin then created the hex by dragging the exteep.bin over swapbinhex.exe wich gives me exteep.hex.

2.deleted atmega card using infinity sofware + programmer.

3 loaded exeep.hex to the ext.EEprom, lastest ntl.hex taken from my m8ys card (lives round the corner and just had same card sorted for 20 quid) loaded this to the flash, ive not reloaded anything to the int.EEprom. I then powered the NTL box down and inserted the atmega card, now ive powered the NTL box back up, put it on channel 101 (BBC1) and left it for 20 mins returning to it to find that i still get the message "card int inserted properly etc"

thnx for any support

Nicky

spikebaby · 13-01-08, 03:22 PM

did you use the right flash

nickold · 13-01-08, 04:12 PM

ive now tried the latest chaosmega ntl.hex in the flash and exeep.hex into the ext.EEprom

no joy

someone told me to try leaving the exeep.bin as it is and using that instead of changing it to .hex so ive tried that aswell,

still no joy

james79 · 13-01-08, 04:36 PM

Hi, what are the best type of cards to buy,
ie, is the funcard 5 better than funcard 4 ?and so on...
I have 2 boxes allready done one fun card 4 & 1 ntl card

But i have another box i need a card for explorer 4000,
first time having a go at this as my mate used to sort them for me.
Any help welcome Thanks jay

nickold · 13-01-08, 05:25 PM

All sorted
i was presuming i was in a NTL are and was writung the wrong flash file @ shoulda been using CW.

spikebaby · 13-01-08, 06:41 PM

Quote:

Originally Posted by nickold

All sorted
i was presuming i was in a NTL are and was writung the wrong flash file @ shoulda been using CW.

nice one mate

lee11168 · 14-01-08, 08:59 AM

Quote:

Originally Posted by nickold

All sorted
i was presuming i was in a NTL are and was writung the wrong flash file @ shoulda been using CW.

i did that for ages in bb3 area it hasnt been c&w for years

13-01-08, 10:52 AM	#1 (permalink)
nickold Junior Member Join Date: Jan 2008 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	NEW ATmega card This is my 1st post so "Hello To All" I am a beginner (noob) I have:- samsung 2100c ntl/virgin box (chipped but lost original atmega card) in BB3 area bk-known i think its called ird number (8digit?)-known network key-unknown atmega card- ATmega163+24c256- brand new and blank infinity USB unlimited programmer 3E 1D 25 C1 74 DB these numbers are taped to bottom of chipped box this i think is the ird+ bk number @ do these look ok @ ive swapped some numbers with * becuase i dont know if this is secure info and will gladly give you the full numbers if required upto yet ive 1. used toxic7 and put my ird + bk number in the relevent place and put a tick in NTL, saved as exteep.bin then created the hex by dragging the exteep.bin over swapbinhex.exe wich gives me exteep.hex. 2.deleted atmega card using infinity sofware + programmer. 3 loaded exeep.hex to the ext.EEprom, lastest ntl.hex taken from my m8ys card (lives round the corner and just had same card sorted for 20 quid) loaded this to the flash, ive not reloaded anything to the int.EEprom. I then powered the NTL box down and inserted the atmega card, now ive powered the NTL box back up, put it on channel 101 (BBC1) and left it for 20 mins returning to it to find that i still get the message "card int inserted properly etc" thnx for any support Nicky Last edited by nickold; 13-01-08 at 10:56 AM.

13-01-08, 03:22 PM	#2 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,137 Thanks: 22 Thanked 183 Times in 168 Posts	Re: NEW ATmega card did you use the right flash

13-01-08, 04:12 PM	#3 (permalink)
nickold Junior Member Join Date: Jan 2008 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Re: NEW ATmega card ive now tried the latest chaosmega ntl.hex in the flash and exeep.hex into the ext.EEprom no joy someone told me to try leaving the exeep.bin as it is and using that instead of changing it to .hex so ive tried that aswell, still no joy

13-01-08, 04:36 PM	#4 (permalink)
james79 Junior Member Join Date: Jan 2008 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Re: NEW ATmega card Hi, what are the best type of cards to buy, ie, is the funcard 5 better than funcard 4 ?and so on... I have 2 boxes allready done one fun card 4 & 1 ntl card But i have another box i need a card for explorer 4000, first time having a go at this as my mate used to sort them for me. Any help welcome Thanks jay Last edited by james79; 13-01-08 at 05:56 PM.

13-01-08, 05:25 PM	#5 (permalink)
nickold Junior Member Join Date: Jan 2008 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Re: NEW ATmega card All sorted i was presuming i was in a NTL are and was writung the wrong flash file @ shoulda been using CW.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
atmega card	clarkyj	CAMs Cards & Programmers	4	15-01-08 12:15 AM
TV on demand working with ATmega card?	tariqz118	Cable TV Chat	6	20-12-07 11:03 PM
Atmega 163 card	rizzla664	Cable TV Chat	14	15-07-07 07:09 PM
Help needed to reprogram ATMega Card	niteshnp2001	Cable TV Chat	1	17-06-07 02:43 AM