Need help For pace Di1010T - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

jimy789 · 31-01-08, 10:14 PM

any body can help ? my Box is turnig On & Off automatically

Box is Turning On & Flashing PACE & then Turn OFF, after few seconds agian turnig On & then Off

plz help me to fix this box

reddiesel · 01-02-08, 12:00 AM

It could be the psu check the caps, if you have to replace any make sure they are high temp type or they wont last long, if you cant get exact same voltage or impedance slightly higher will work.

jimy789 · 01-02-08, 09:24 PM

what is psu ?

reddiesel · 02-02-08, 02:49 AM

The power supply unit its on the board on the right, capacitors are the big round cans near the transformer, they have volts and uf marked on them, you may see if theyve popped or look swollen, if not you can check them with a volt meter if it has ohms setting, take board out and test on underside and you should get a brief reading similar to uf number try probes both ways, no reading or wrong reading and its duff.

jimy789 · 02-02-08, 06:48 PM

thanks u very much

31-01-08, 10:14 PM	#1 (permalink)
jimy789 Member Join Date: Jun 2007 Posts: 62 Thanks: 62 Thanked 1 Time in 1 Post	any body can help ? my Box is turnig On & Off automatically Box is Turning On & Flashing PACE & then Turn OFF, after few seconds agian turnig On & then Off plz help me to fix this box Last edited by nanochickin; 31-01-08 at 10:38 PM. Reason: Post clocking

01-02-08, 12:00 AM	#2 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: Need help For pace Di1010T It could be the psu check the caps, if you have to replace any make sure they are high temp type or they wont last long, if you cant get exact same voltage or impedance slightly higher will work.

01-02-08, 09:24 PM	#3 (permalink)
jimy789 Member Join Date: Jun 2007 Posts: 62 Thanks: 62 Thanked 1 Time in 1 Post	Re: Need help For pace Di1010T what is psu ?

02-02-08, 02:49 AM	#4 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: Need help For pace Di1010T The power supply unit its on the board on the right, capacitors are the big round cans near the transformer, they have volts and uf marked on them, you may see if theyve popped or look swollen, if not you can check them with a volt meter if it has ohms setting, take board out and test on underside and you should get a brief reading similar to uf number try probes both ways, no reading or wrong reading and its duff. Last edited by reddiesel; 02-02-08 at 02:54 AM.

02-02-08, 06:48 PM	#5 (permalink)
jimy789 Member Join Date: Jun 2007 Posts: 62 Thanks: 62 Thanked 1 Time in 1 Post	Re: Need help For pace Di1010T thanks u very much