pnp led simm - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

mav · 01-02-08, 01:39 PM

Hi,
Has any one got a tut for using pnp led simm

Tee_111 · 01-02-08, 01:45 PM

Yes, for which model mate?

mav · 01-02-08, 03:23 PM

Hi,
For 4001, if you have it mate , and the pnp led sim is the one with silver flip swith on top.

jimbo · 01-02-08, 03:33 PM

like this Electronics Store - Led Simm if so download the attachment.

jimbo · 01-02-08, 03:52 PM

with power off remove simm from 4001 and replace with the pnp simm, make sure its seated correctly with the clips on board and the silver switch in the middle, turn power on, push in the little push button and with the attached flash tester mark up the lights that are light, check the ird is the same on the scart in box, remove the lights you marked from tester, then throw switch to left and mark them down in the first 4 panels then turn switch to right mark them down and thats your 16 digit boxkey.

mav · 01-02-08, 10:56 PM

Thank you for that jimbo, should the led simm go lights facing back of stb or facing front.

jimbo · 02-02-08, 12:08 AM

lights facing back.

matthew4321 · 02-02-08, 11:38 AM

iv got a problem with my pnp simm reader, when i plug it in the little lights light up but some of the are fayded (sorry about spelling) have i got a f**ked one of is it some thing im doing???

reddiesel · 02-02-08, 12:30 PM

Have you got it fitted in right ? does it do it in all switch positions or just in middle ?

matthew4321 · 02-02-08, 02:18 PM

all switch positions and it has some tape the other site witch says do not remove.

01-02-08, 01:39 PM	#1 (permalink)
mav Junior Member Join Date: Jan 2008 Posts: 19 Thanks: 4 Thanked 0 Times in 0 Posts	pnp led simm Hi, Has any one got a tut for using pnp led simm

01-02-08, 01:45 PM	#2 (permalink)
Tee_111 Super Moderator Join Date: Dec 2006 Location: West Yorks Posts: 1,309 Thanks: 24 Thanked 78 Times in 60 Posts	Re: pnp led simm Yes, for which model mate?

01-02-08, 03:23 PM	#3 (permalink)
mav Junior Member Join Date: Jan 2008 Posts: 19 Thanks: 4 Thanked 0 Times in 0 Posts	Re: pnp led simm Hi, For 4001, if you have it mate , and the pnp led sim is the one with silver flip swith on top.

01-02-08, 03:52 PM	#5 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 1,405 Thanks: 18 Thanked 151 Times in 108 Posts	Re: pnp led simm with power off remove simm from 4001 and replace with the pnp simm, make sure its seated correctly with the clips on board and the silver switch in the middle, turn power on, push in the little push button and with the attached flash tester mark up the lights that are light, check the ird is the same on the scart in box, remove the lights you marked from tester, then throw switch to left and mark them down in the first 4 panels then turn switch to right mark them down and thats your 16 digit boxkey. __________________ only a fool pays sat subs lol Last edited by jimbo; 01-02-08 at 03:54 PM.

01-02-08, 10:56 PM	#6 (permalink)
mav Junior Member Join Date: Jan 2008 Posts: 19 Thanks: 4 Thanked 0 Times in 0 Posts	Re: pnp led simm Thank you for that jimbo, should the led simm go lights facing back of stb or facing front.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

02-02-08, 12:08 AM	#7 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 1,405 Thanks: 18 Thanked 151 Times in 108 Posts	Re: pnp led simm lights facing back. __________________ only a fool pays sat subs lol

02-02-08, 11:38 AM	#8 (permalink)
matthew4321 Senior Member Join Date: Nov 2007 Posts: 170 Thanks: 3 Thanked 29 Times in 23 Posts	Re: pnp led simm iv got a problem with my pnp simm reader, when i plug it in the little lights light up but some of the are fayded (sorry about spelling) have i got a f**ked one of is it some thing im doing???

02-02-08, 12:30 PM	#9 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,899 Thanks: 32 Thanked 243 Times in 229 Posts	Re: pnp led simm Have you got it fitted in right ? does it do it in all switch positions or just in middle ?

02-02-08, 02:18 PM	#10 (permalink)
matthew4321 Senior Member Join Date: Nov 2007 Posts: 170 Thanks: 3 Thanked 29 Times in 23 Posts	Re: pnp led simm all switch positions and it has some tape the other site witch says do not remove.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pace Di4001-N stuck on tune	Ciwan	Cable TV Chat	30	05-05-08 04:29 PM
Need a plug & play led simm	mrxxperfect	Cable TV Chat	3	12-01-08 01:41 AM
P&P led simm	Peter271254	Cable TV Chat	2	30-10-07 09:10 AM
plug and play led simm	jayjayw	Cable TV Chat	16	05-08-07 12:44 PM
Led Simm.	rizzla664	Cable TV Chat	25	23-06-07 01:02 PM