V+ box does not restart after putting in net id funcard.

[zxcvbnnm]

I have managed to remove the 512 chip, and install a blank one.
Now when i go into the eng. menu, it says 9999 for net id, and 0000 for pin. However when i insert my net id funcard4, the box does not reboot to update. it just stays on the current page. I have set my frequence.
Please can someone help me?
THankyou

[spikebaby]

you must be in the eng menu and turn the pages over when you, do the net id fun, is this the one you bought of e bay i bet the card isnt paired

failing that use an atmega card, also what area are you in pure c/w tw

[zxcvbnnm]

Yeah this is the one i got from ebay, But i know that it has a paired card as i have retrieved the ird and bk, then i used a utility which checks if the ird is correct by entering the nagra serial number written on the back of the smart card, and i done that and it gave the exact same ird that i managed to retrieve from the card.

The only thing that concerns me is that under card status it says "no t-stream", that is when i insert my fun net id card. Can you tell me if that is how it should be ? note that the net id has not been set.

Please can someone help me? When i insert the fun net it card, it DOES NOT reboot on page 2, instead the card limit jumps to £5150. What should i do???
And also the pin has not been set and i am allowed to set it but yet i have not.

Please can someone help me? i urgently need help.
I am in a TW area.
Thank you

[spikebaby]

no tstream ........no signal now depending which box you have bought no sure of the working capabilitties of the t.w

[zxcvbnnm]

Ok. All i want to know is whether it should say no t-stream or not before setting net it? from my point of view, i would think that it would definatly say no t-stream before the net id is set as the box does not know were it is.
Anyway what do you mean by "now depending which box..."
I am getting really anoyed by this whole cable stuf, but i know that onces it is up and running, it will be very amazing.
Please can some one help.
Thankyou

[reddiesel]

No t stream normally means no signal , but ive had working boxes that still say that so i wouldnt worry too much, set your frequency and give it a chance to work, you need latest v2 with this box, try turning pages in menu.

[zxcvbnnm]

Ok, i went into eng menu page 2, and inserted my card. Then the credit went to £5150.50 and the revision of the card changed.

Anyway, after around 5 min, the box restarted. On the front display it said, Boot, then that went away and then the virgin "powering up.. just a moment " message came up, now it has been on that for the past 15 min.
What should i do? leave it running... or?
Also can you tell me whether this is what usually happens??? (after inserting card,box restarts,and goes to virgin message??)
THankyou for all your wonderfull help.

[reddiesel]

Sounds good has net id set right? if so just wait.

[zxcvbnnm]

It has been on the virgin powering screen for around 50 mins, with no luck, so i reset the box, and went into eng menu, But the net id is STILL 9999.
What should i do?
I am using a fun card. and am in a TW area. I have been told that in a TW area the pin does not show in the eng menu, however it is showing up on mine.
Thankyou

[zxcvbnnm]

Something makes me think that the hdd may be causing this, i was thinking of putting the HDD into my pc, and then formatting it, But i dont know what format it would need to be in and if its a good idea?
Thanks