Special thanks to Yorks.

[jimmy44]

Good afther-noon and a big big thanks Yorks

I was very angious, because I received a silvercrest to update .
And I made a very big fault .... It had a firm 1084H-B65BE....The chip AliM3329B1 The flash 29LV160 CBTC .
I followed a method to change in truman 1.3.83....with the pack Utility SL65 . I succeeded, but cannot open the " french " channels my friend wanted ... than I passed the 1.3.84 with the ali fixer and sended to receiver .... I succeeded too but thequestion was " how to set favoris ??? ' Channels where opened without necessity to put a code; It s there that I made my emorm mistake by returning to the firm 1084H-B65DE....
Return was ok... but receiver will not go to standby ( not a problem)...
After I have understanded the procedure to create fav I resended the firm 1.3.84 but .... receiver stay with nothing and the pocket was not operating... I leave the receiver for some hours and make the reflexion.... I cannot set the ucas with 2580, may be I must make a new patch and I patched like your suggestion .with SLC65A__...now I am very happy to have a new receiver.... info are now Version H/W A4AA100A11013E DVBS CMG 01.4.41 date 03.24:40 oct 14 2006;
To be able to see the channels my friend wanted to see indian in the TiPiS I want to use the last truman firmware 1.3.85...
May I use this and send with dvbupdater without risk and what with the fav...?
Or I must use the other loader which is in the utility pack ( without checking) and with option allcode + bootloader...

It will be very nice and I promise to be the most helpfull possible on this forum... I experience Powersky 8210, 1900CR, 1900CR/Ci and Univers 4113... and I'm active on several forum ... with same pseudo or jmq.

Thanks in advance and sorry for my english...

[solunauk]

Where are you going to get Truman 1.3.85? You must be sure that it is patched for use with the Comag.

I strongly suggest you go to the forums at satboard dot uk dot to and read the sticky in the Comag SL65 section on how to patch. You will find all the correct files and a lot of help there.

Good luck.

Sol

[jimmy44]

Originally Posted by solunauk

Where are you going to get Truman 1.3.85? You must be sure that it is patched for use with the Comag.

I strongly suggest you go to the forums at satboard dot uk dot to and read the sticky in the Comag SL65 section on how to patch. You will find all the correct files and a lot of help there.

Good luck.

Sol

may not send pm ... but be confident ..loaded on site Truman ... adapted with alifixer with Mando/audio/display coched .
I need to know if I may load with comagsys öhneprüf updater and the option allcode with or without bootloader.
To start loading to receiver ... must be connected on the tv or may be on the table .

thanks for your advice. awaiting your "green ligth to update "

[arden]

1.3.85 ready to use on the b1 sl65 is on the site solunauk mentioned

if you download it from there it packaged with the correct loader for flashing the box

can confirm tps open with this patch with AU

follow instructions to the letter or you will be making a jtag cable

[jimmy44]

Hello ! It would be kind when you can send a dump with the aproriate loader .
I turn round the solution now a week ago and I 'm ready to go in psyschiatric...
I tryed differents manner and firms such 1.3.85 fixed and no fixed ... the firm for my univers .... no way, no way but I return without problem to H/WA4AA100A110A3E
DVBS CMG 01.4.41.. 03.24:40 Oct 14 2006 Now CS ENABLED... With th 1.3.85
afther flashing the displays shows ---- and in standby starts a clock... but no
possibitlities with the pocket.... No way, ... Thank you for your help!

[solunauk]

Sorry Jimmy44, but unless you can explain your problem in much clearer English, we won't be able to help you. I think it's normal for the display to show ---- after flashing, but my SL65/12 doesn't have a display so I'm not sure. Anyone else??

Sol

[arden]

my b1 has a lcd displey and shows clock on s/b

jimmy44 im really not sure what you are after satboard dot uk has the loader and firmware and the instuctions on how to load it

out of interest what is you native language?

[jimmy44]

Originally Posted by arden

my b1 has a lcd displey and shows clock on s/b

jimmy44 im really not sure what you are after satboard dot uk has the loader and firmware and the instuctions on how to load it

out of interest what is you native language?

Yes, sorry for my poor english. I'm french native from Belgien.64 springs

Yes I know what the ----will say but my remote control is full inoperating... It's why I cannot configure my receiver. with this firmware ... with comag still ok. but I see nothing and cannot make a config , then what about truman ??? may be waits a channels list ??? I tryed to send ... he asked please enter allcode option... and I was back to original after flash.!!!!

Thanks for your patience .
I give away the receiver to the owner and close the subject.

May be ... (certainly) I m stupid but I never had problem with my arion and my new Univers .

Thank you .... if fortunately I resolves the problem I will explain my mistake ...

Bye and thanks again.

[arden]

ok if I understand this right you have flashed the sl65 with 1.3.85 and now the remote is not now working ?

that would happen if the firmware has not been converted to use the sl65 remote

where did you get the firmware from?

this is explained better on --h**p:// satboard.uk.to/forum/---

[jimmy44]

Thanks ! I received from spannish forum El Rincon del SL65 and a link to dvduplaod.

Doesnot ali fixer the necessary to adapte the remote ... it's not the option mando ?
what a pitty with all the foreign languages :-)))
I registerd to satboard... and I will take time to learn . Thanks you are certainly my "God" regards.