please help - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

gavlp20 · 04-03-08, 07:03 PM

i can still not get galaxie sport it is just saying scrambled i have got 118p firmware on tm-5300 and all the latest softcam key and 90% on 12.648v but still no luck
cheers
Gav

roadrunner · 04-03-08, 07:59 PM

Are you sure you are pointing at 1 West? ?Some frequencies are the same (similar )on different Sats. If you are pointing at the right one (and it wouldn`t update with a patient wait of up to a couple o minutes)try to switch the receiver OFF and ON again at the back to force the update. I tried the patch (altough I do not normally watch DIgi TV but moved the dish to see if it`s working) and it is working.

gavlp20 · 04-03-08, 08:11 PM

i have turned the box on and still no good what other channels should i pick up so i now if i am pointing the right way
thanx
Gav

Mickha · 04-03-08, 08:13 PM

You should be opening all these channels on Digi TV:
_http://www.lyngsat.com/packages/digi.html

Robbo · 04-03-08, 08:15 PM

BBC world on 11325H free to air.

gavlp20 · 04-03-08, 08:57 PM

it says no signal on bbc world and so suched been out side and adjusted dish now losed all 1w channels
Gav

Robbo · 04-03-08, 09:28 PM

Did you get a signal on 11325H- BBC World?

If you have a motorised dish, enter your long and lat and within USALS send the dish to 1W. Then adjust the declination (swivel the dish up and down) and swivel the motor round the pole for the best quality signal on 11325H.

Assuming your elevation (motor) is correct and the pole vertical you should be tracking the arc reasonably well. Have you read the motor set-up stickies.?

04-03-08, 07:03 PM	#1 (permalink)
gavlp20 Junior Member Join Date: Feb 2008 Posts: 28 Thanks: 25 Thanked 0 Times in 0 Posts	please help i can still not get galaxie sport it is just saying scrambled i have got 118p firmware on tm-5300 and all the latest softcam key and 90% on 12.648v but still no luck cheers Gav

04-03-08, 07:59 PM	#2 (permalink)
roadrunner Senior Member Join Date: Dec 2007 Location: Mddx Posts: 118 Thanks: 2 Thanked 6 Times in 6 Posts	Re: please help Are you sure you are pointing at 1 West? ?Some frequencies are the same (similar )on different Sats. If you are pointing at the right one (and it wouldn`t update with a patient wait of up to a couple o minutes)try to switch the receiver OFF and ON again at the back to force the update. I tried the patch (altough I do not normally watch DIgi TV but moved the dish to see if it`s working) and it is working. __________________ TM5400 and about 50 feet of hope between the receiver and a monoblock Last edited by roadrunner; 04-03-08 at 08:07 PM.

04-03-08, 08:11 PM	#3 (permalink)
gavlp20 Junior Member Join Date: Feb 2008 Posts: 28 Thanks: 25 Thanked 0 Times in 0 Posts	Re: please help i have turned the box on and still no good what other channels should i pick up so i now if i am pointing the right way thanx Gav

04-03-08, 08:13 PM	#4 (permalink)
Mickha Super Moderator Join Date: Feb 2006 Posts: 1,709 Thanks: 5 Thanked 276 Times in 218 Posts	Re: please help You should be opening all these channels on Digi TV: _http://www.lyngsat.com/packages/digi.html

04-03-08, 08:15 PM	#5 (permalink)
Robbo Super Moderator Join Date: Jul 2007 Location: Kent Posts: 5,121 Thanks: 28 Thanked 486 Times in 468 Posts	Re: please help BBC world on 11325H free to air. __________________ كيبل اعضاء البلهاء TM6800,TM1000D.Triax TD110 on STABHH-90 motor.Orbital 1m on Moteck motor+2 x minidishes DigitAlb movie package. Electronics Engineer and satellite installer.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

04-03-08, 08:57 PM	#6 (permalink)
gavlp20 Junior Member Join Date: Feb 2008 Posts: 28 Thanks: 25 Thanked 0 Times in 0 Posts	Re: please help it says no signal on bbc world and so suched been out side and adjusted dish now losed all 1w channels Gav

04-03-08, 09:28 PM	#7 (permalink)
Robbo Super Moderator Join Date: Jul 2007 Location: Kent Posts: 5,121 Thanks: 28 Thanked 486 Times in 468 Posts	Re: please help Did you get a signal on 11325H- BBC World? If you have a motorised dish, enter your long and lat and within USALS send the dish to 1W. Then adjust the declination (swivel the dish up and down) and swivel the motor round the pole for the best quality signal on 11325H. Assuming your elevation (motor) is correct and the pole vertical you should be tracking the arc reasonably well. Have you read the motor set-up stickies.? __________________ كيبل اعضاء البلهاء TM6800,TM1000D.Triax TD110 on STABHH-90 motor.Orbital 1m on Moteck motor+2 x minidishes DigitAlb movie package. Electronics Engineer and satellite installer.