softcam via usb on tm5400? - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

vectorox · 15-03-08, 12:17 AM

Hi, I'm trying to load a softcam keys to a new TM5400CI+ via USB, I've read it's possible but the box cant see them on the USB stick. There is a patch a loader and a softcam.key on the USB stick, all it sees is the patch.
What am I doing wrong?

Thanks.

Robbo · 15-03-08, 12:48 AM

Have you unzipped it?

lincsat · 15-03-08, 02:32 AM

What is the filename?

vectorox · 15-03-08, 10:54 AM

Yeah, I unzipped it. It's called TMSoftcam.key

Robbo · 15-03-08, 10:58 AM

Correct so far.

Have you patched the box?

Maybe it needs patching before the file can be seen.

The TM original firmware will only probably see known file types.

vectorox · 15-03-08, 11:26 AM

I applied patch: Darkmanpatch TM5400CI_5600CI_118p_20080229.stb All seemed to go OK, and the box rebooted fine.
How do I check that the patch was successful? System Information shows: S/W : 1.07 (Dec 13 2007). Not sure if that's supposed to change or not.
Thanks.

Robbo · 15-03-08, 12:08 PM

I don't think that looks right.

I think it should say something along the lines of:-

S/W Version : 1.18p (Feb 29 2008).

I can't check as I have a slightly different model.

vectorox · 15-03-08, 09:28 PM

That's it!
When I loaded the patch it gave me the choice of - Normal DB or Default DB to save to. Normal didn't change it, default did. After that the TMSoftcam.key showed up on the USB drive, and installed OK.
Thanks Guys.

vectorox · 16-03-08, 09:14 PM

OK... Now I've got the patch and todays softcam keys installed and I've re-scanned but there is no change in any of the scrambled channels

If I look under the CAS heading there are only channels listed under the Free + SCR and NDS headings, NDS are all scrambled.

I'm using SAT 28.2E ASTRA2/Euro is that correct?
Thanks.

Robbo · 16-03-08, 09:48 PM

There is nothing to be had using the patch on 28E, any encrypted channels are Sky, and you ain't got a chance.

You need to be able to pick up some other satellites, like 19.2E,13E,1W,15W for example.

15-03-08, 12:17 AM	#1 (permalink)
vectorox Junior Member Join Date: Mar 2008 Posts: 5 Thanks: 1 Thanked 0 Times in 0 Posts	softcam via usb on tm5400? Hi, I'm trying to load a softcam keys to a new TM5400CI+ via USB, I've read it's possible but the box cant see them on the USB stick. There is a patch a loader and a softcam.key on the USB stick, all it sees is the patch. What am I doing wrong? Thanks.

15-03-08, 12:48 AM	#2 (permalink)
Robbo Satellite mad Join Date: Jul 2007 Location: Kent Posts: 9,374 Thanks: 97 Thanked 1,981 Times in 1,603 Posts	Re: softcam via usb on tm5400? Have you unzipped it? __________________ القمر الصناعي هو أفضل TM600 linux,TM6800HD,TM5200,TM1000,TM2200 motor, Triax TD110 dish. Electronics Engineer and satellite installer.MBC Satellites

15-03-08, 02:32 AM	#3 (permalink)
lincsat Super-Dooper Moderator Join Date: Sep 2005 Location: In front of the PC Posts: 6,003 Thanks: 8 Thanked 2,580 Times in 667 Posts	Re: softcam via usb on tm5400? What is the filename? __________________ Blade7000 & DM800Pro/SE in Stock, Linux Sat boxes from £52.25, SkyboxF3 under £60. Kryptview £123.50 & SV6 under £72 with Members Discount - Lincsat's Nick-Nacks (Shop) Drivers Protest Union

15-03-08, 10:54 AM	#4 (permalink)
vectorox Junior Member Join Date: Mar 2008 Posts: 5 Thanks: 1 Thanked 0 Times in 0 Posts	Re: softcam via usb on tm5400? Yeah, I unzipped it. It's called TMSoftcam.key

15-03-08, 10:58 AM	#5 (permalink)
Robbo Satellite mad Join Date: Jul 2007 Location: Kent Posts: 9,374 Thanks: 97 Thanked 1,981 Times in 1,603 Posts	Re: softcam via usb on tm5400? Correct so far. Have you patched the box? Maybe it needs patching before the file can be seen. The TM original firmware will only probably see known file types. __________________ القمر الصناعي هو أفضل TM600 linux,TM6800HD,TM5200,TM1000,TM2200 motor, Triax TD110 dish. Electronics Engineer and satellite installer.MBC Satellites Last edited by Robbo; 15-03-08 at 11:01 AM.

15-03-08, 11:26 AM	#6 (permalink)
vectorox Junior Member Join Date: Mar 2008 Posts: 5 Thanks: 1 Thanked 0 Times in 0 Posts	Re: softcam via usb on tm5400? I applied patch: Darkmanpatch TM5400CI_5600CI_118p_20080229.stb All seemed to go OK, and the box rebooted fine. How do I check that the patch was successful? System Information shows: S/W : 1.07 (Dec 13 2007). Not sure if that's supposed to change or not. Thanks.

15-03-08, 12:08 PM	#7 (permalink)
Robbo Satellite mad Join Date: Jul 2007 Location: Kent Posts: 9,374 Thanks: 97 Thanked 1,981 Times in 1,603 Posts	Re: softcam via usb on tm5400? I don't think that looks right. I think it should say something along the lines of:- S/W Version : 1.18p (Feb 29 2008). I can't check as I have a slightly different model. __________________ القمر الصناعي هو أفضل TM600 linux,TM6800HD,TM5200,TM1000,TM2200 motor, Triax TD110 dish. Electronics Engineer and satellite installer.MBC Satellites

15-03-08, 09:28 PM	#8 (permalink)
vectorox Junior Member Join Date: Mar 2008 Posts: 5 Thanks: 1 Thanked 0 Times in 0 Posts	Re: softcam via usb on tm5400? That's it! When I loaded the patch it gave me the choice of - Normal DB or Default DB to save to. Normal didn't change it, default did. After that the TMSoftcam.key showed up on the USB drive, and installed OK. Thanks Guys.

16-03-08, 09:14 PM	#9 (permalink)
vectorox Junior Member Join Date: Mar 2008 Posts: 5 Thanks: 1 Thanked 0 Times in 0 Posts	Re: softcam via usb on tm5400? OK... Now I've got the patch and todays softcam keys installed and I've re-scanned but there is no change in any of the scrambled channels If I look under the CAS heading there are only channels listed under the Free + SCR and NDS headings, NDS are all scrambled. I'm using SAT 28.2E ASTRA2/Euro is that correct? Thanks.

16-03-08, 09:48 PM	#10 (permalink)
Robbo Satellite mad Join Date: Jul 2007 Location: Kent Posts: 9,374 Thanks: 97 Thanked 1,981 Times in 1,603 Posts	Re: softcam via usb on tm5400? There is nothing to be had using the patch on 28E, any encrypted channels are Sky, and you ain't got a chance. You need to be able to pick up some other satellites, like 19.2E,13E,1W,15W for example. __________________ القمر الصناعي هو أفضل TM600 linux,TM6800HD,TM5200,TM1000,TM2200 motor, Triax TD110 dish. Electronics Engineer and satellite installer.MBC Satellites

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
softcam/ patches	iwm	Satellite Help	2	16-02-08 04:30 PM
monoblock on tm5400	roadrunner	Technomate	3	20-12-07 09:03 PM
softcam updates?	lee171181	Satellite Help	10	16-09-07 06:25 PM
TM1000 Series Patching, Softcam, Key Edit Complete Video Tutorials	Realist	Technomate	162	16-06-07 02:06 PM
softcam keys	chavslav	CAMs Cards & Programmers	5	13-09-06 09:06 PM