ur13 - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

trigger1176 · 24-03-08, 04:18 PM

ur13 is out any one tried it yet

arden · 24-03-08, 05:00 PM

ive not installed it yet but from the feedback ive seen will be doing so very soon

Ive had some strange motor problems on ur11 where it says moving on screen but dish dose not move

one of the fixes in ur13 is improved motor control so fingers crossed

nanochickin · 24-03-08, 05:18 PM

Its made my TM9100 useable again

To make it stable I installed the new DS CVS image to update the drivers etc etc and then installed UR13 using Technomate control centre and a serial lead.

I know it takes longer but its not as long as jtagging the thing when it goes t!ts up

On first impressions the combination of DS CVS & UR13 is very stable and it operates my motor properly with out the receiver wanting to ram the motor into the westerly stops all the time like it did before under UR11

The dreaded rebooting also seems to have stopped too

I would recommend installing the new DS CVS image first as it seems to have helped loads on mine.

I did install UR13 on the TM9100 with the original firmware under it and it did wobble every now and then, it also locked up a few times. Its definately better with the DS CVS under it

I might even try DS 3.6 on it when it comes out, i'm just enjoying a stable box for once

Nano

trigger1176 · 24-03-08, 05:30 PM

im using the ur12 flash which im quite happy with the pvr is solid the only problem iv got is random reboots.whats the new fix in the ur 13 ??

nanochickin · 24-03-08, 06:28 PM

Updated Motor
SNR & AGC & BER fixed
16:9 Letter box & Panscan mode updated
Radio channel overflow fixed
Added Control Panel Download status message window
Updated Control Panel
Fixed memory leak
Fixed volume

And now you know

Nano

thfccambs · 26-03-08, 05:52 AM

Run time is now upto 32 hours, so not one reboot since i loaded UR13, solid as a rock.

nanochickin · 26-03-08, 09:15 AM

Nearly 56 hours for mine

thfccambs · 26-03-08, 02:32 PM

Quote:

Originally Posted by nanochickin

Nearly 56 hours for mine

Best image for me so far, still not one single reboot.
About time though. No freezing on sly card either.

trigger1176 · 26-03-08, 04:21 PM

Quote:

Originally Posted by thfccambs

Best image for me so far, still not one single reboot.
About time though. No freezing on sly card either.

hiya mate
what set up are you using 2 get the sly card working ??

thfccambs · 26-03-08, 04:23 PM

Quote:

Originally Posted by trigger1176

hiya mate
what set up are you using 2 get the sly card working ??

I'm using gbox.

24-03-08, 04:18 PM	#1 (permalink)
trigger1176 Member Join Date: Jan 2008 Posts: 47 Thanks: 6 Thanked 1 Time in 1 Post	ur13 ur13 is out any one tried it yet

24-03-08, 05:00 PM	#2 (permalink)
arden Senior Member Join Date: Aug 2006 Posts: 471 Thanks: 4 Thanked 13 Times in 12 Posts	Re: ur13 ive not installed it yet but from the feedback ive seen will be doing so very soon Ive had some strange motor problems on ur11 where it says moving on screen but dish dose not move one of the fixes in ur13 is improved motor control so fingers crossed __________________ tm9100 diablo 2.3 and triax 1.1 motorized cards inc AKTA and Gamma

24-03-08, 05:18 PM	#3 (permalink)
nanochickin Retired Mod & Sat Guru Join Date: Aug 2006 Location: Wolverhampton Posts: 3,825 Thanks: 46 Thanked 338 Times in 270 Posts	Re: ur13 Its made my TM9100 useable again To make it stable I installed the new DS CVS image to update the drivers etc etc and then installed UR13 using Technomate control centre and a serial lead. I know it takes longer but its not as long as jtagging the thing when it goes t!ts up On first impressions the combination of DS CVS & UR13 is very stable and it operates my motor properly with out the receiver wanting to ram the motor into the westerly stops all the time like it did before under UR11 The dreaded rebooting also seems to have stopped too I would recommend installing the new DS CVS image first as it seems to have helped loads on mine. I did install UR13 on the TM9100 with the original firmware under it and it did wobble every now and then, it also locked up a few times. Its definately better with the DS CVS under it I might even try DS 3.6 on it when it comes out, i'm just enjoying a stable box for once Nano __________________ Sanity is nothing more than an excuse to be boring Last edited by nanochickin; 24-03-08 at 05:23 PM.

24-03-08, 05:30 PM	#4 (permalink)
trigger1176 Member Join Date: Jan 2008 Posts: 47 Thanks: 6 Thanked 1 Time in 1 Post	Re: ur13 im using the ur12 flash which im quite happy with the pvr is solid the only problem iv got is random reboots.whats the new fix in the ur 13 ??

24-03-08, 06:28 PM	#5 (permalink)
nanochickin Retired Mod & Sat Guru Join Date: Aug 2006 Location: Wolverhampton Posts: 3,825 Thanks: 46 Thanked 338 Times in 270 Posts	Re: ur13 Updated Motor SNR & AGC & BER fixed 16:9 Letter box & Panscan mode updated Radio channel overflow fixed Added Control Panel Download status message window Updated Control Panel Fixed memory leak Fixed volume And now you know Nano __________________ Sanity is nothing more than an excuse to be boring

26-03-08, 05:52 AM	#6 (permalink)
thfccambs Junior Member Join Date: Nov 2007 Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	Re: ur13 Run time is now upto 32 hours, so not one reboot since i loaded UR13, solid as a rock.

26-03-08, 09:15 AM	#7 (permalink)
nanochickin Retired Mod & Sat Guru Join Date: Aug 2006 Location: Wolverhampton Posts: 3,825 Thanks: 46 Thanked 338 Times in 270 Posts	Re: ur13 Nearly 56 hours for mine __________________ Sanity is nothing more than an excuse to be boring