I need smart mx03,Help I'm Stuck

[chavestroter]

I have got silvercrest sl65 .I use truman 1.3.76 old version.Please
I need to find smart mx03 to patch.I found 1 ,but there is no channel
signal.I think I need one already converted to work with silvercrest.
Please can anyone tell me where I can find it?

[arden]

ok Im not sure if the ops will like the fact that you have split this over two threads

maidens site is

satboard dot uk dot to

everything you need is on there and more

[robbo71]

Merged Threads

[chavestroter]

Sorry I can not find it.Please could you leave a link?

Thanks

[arden]

sorry no live links allowed

Ive just googled the info you have already been given and it came up as the top hit

try putting comagforum into google

also alot of what you are asking is already in this section

let us know how you get on

[robbo71]

Yep, comes up straight away:-

_http://comagforum.zapto.org/forum/index.php

[chavestroter]

The link above is not working.
I found Master piece mx03 based -v1.10p8 I loaded on receiver,but there is no channel signal.On antenna setup:satellite(1/2)is Astra and (2/2) is hotbird .I tried to change,but I couldn't.I think hotbird should be 1/2 and Astra 2/2.Can anyone tell me
how I can change and setup the rest.I use monoblock Hotbird/Astra.Thanks for your
help.MX03 looks good,I just don't have channel signal.

[solunauk]

The link isn't supposed to work. You have to put it into your browser address window and remove the underscore from the front of it.

You don't need to change the satellite order, that's irrelevant. If your dish is primarily focused on Astra, that needs to to be set as Port 2 in Diseqc 1.0 in Antenna Setup for Astra. Hotbird will be Port 1. If your dish is focused on Hotbird, then those two Diseqc 1.0 settings should be reversed.

You will endear yourself to those that help you by experimenting and reading more before asking more questions.

Sol

[arden]

the site was down for a short time yesterday but back up now

[robbo71]

Originally Posted by chavestroter

The link above is not working.
I found Master piece mx03 based -v1.10p8 I loaded on receiver,but there is no channel signal.On antenna setup:satellite(1/2)is Astra and (2/2) is hotbird .I tried to change,but I couldn't.I think hotbird should be 1/2 and Astra 2/2.Can anyone tell me
how I can change and setup the rest.I use monoblock Hotbird/Astra.Thanks for your
help.MX03 looks good,I just don't have channel signal.

On a monoblock when looking at the dish face, the right hand LNB is always Hotbird, the left hand one always Astra 1.

You can check which one you have selected, by covering it up with your hand, the signal will disappear.

Originally Posted by solunauk

Hotbird will be Port 1. If your dish is focused on Hotbird, then those two Diseqc 1.0 settings should be reversed.

You will endear yourself to those that help you by experimenting and reading more before asking more questions.

Sol, this does not make sense, why would you want to swap the Diseqc settings over?, these are determined by the monoblock, irrespective of which part is at the focus.

BTW, at satellitehelp which is now part of Techwatch, we pride ourselves on spoonfeeding the newbies if necessary.
Robbo