I need smart mx03,Help I'm Stuck - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

chavestroter · 22-03-08, 07:12 PM

Hi there
I have got silvercrest sl65 and I loaded the truman_1.3.76_vampire From 29-09-07.As you can see is not doing au in anything.Could you tell me where I can find a new firmware ,new loader .Also I do not know if I have
to load a softcam.Please I need your answer.anybody can help.

solunauk · 23-03-08, 02:56 PM

Hi
1.3.76 is waaaaay out of date - 1.3.90 is the latest. Find it and all the other info you require in the forums on satboard dot uk dot to (maiden's satboard).

Sol

chavestroter · 23-03-08, 03:42 PM

When I try to load 1.3.90 says "stb loader version is not compatible,please update loader! What can I do?Please I need help.

solunauk · 23-03-08, 06:10 PM

Google for "Comag system tool ohne prufung" or "Torax loader" and use that. You can also find both on Maiden's satboard - do a search.

Sol

arden · 23-03-08, 06:10 PM

there are 2 loaders

have a look on the other forum for a thread marked

Patch guide SL65/SL6512v Ali B1 Chip you will fine both there

chavestroter · 23-03-08, 07:06 PM

I loaded truman 1.3.90 and there is no channel signal.When I load back to
1.3.76 old version works.What can I do?Please anyone help me.
Ali M3329 B1-Silvercrest SL65

arden · 24-03-08, 11:43 AM

best guess you used a truman patch that had not been adapted for use on the sl65

can you run it though ali fixer 1.4b?

its on the site you got the firmware from

chavestroter · 24-03-08, 06:24 PM

I used Alifixer 0.8 on truman 1.3.90 and says no channel signal.Please can anyone send to me 1.3.90 already fixed with alifixer.I do not know anymore what I can do?
I found Alifixer 0.4b,but file was missing or invalid,so I used Alifixer 0.8.
Please can anyone post here or send to me by "pm"message.Thanks a lot.

arden · 24-03-08, 07:16 PM

they are there on Maiden's satboard ready converted

also the smart mx03 firmware is there as well Ive tried it and confirm it looks better than truman plus side with this the premiere portal works and better epg not just now and next

chavestroter · 24-03-08, 08:54 PM

Where Can I find it?How did you patch your receiver with mx03?
Thanks.

22-03-08, 07:12 PM	#1 (permalink)
chavestroter Junior Member Join Date: Sep 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Help, I am stuck Hi there I have got silvercrest sl65 and I loaded the truman_1.3.76_vampire From 29-09-07.As you can see is not doing au in anything.Could you tell me where I can find a new firmware ,new loader .Also I do not know if I have to load a softcam.Please I need your answer.anybody can help.

23-03-08, 02:56 PM	#2 (permalink)
solunauk Look into my eyes ... Join Date: Aug 2007 Location: South West UK Posts: 316 Thanks: 6 Thanked 23 Times in 19 Posts	Re: Help, I am stuck Hi 1.3.76 is waaaaay out of date - 1.3.90 is the latest. Find it and all the other info you require in the forums on satboard dot uk dot to (maiden's satboard). Sol

23-03-08, 03:42 PM	#3 (permalink)
chavestroter Junior Member Join Date: Sep 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Help, I am stuck When I try to load 1.3.90 says "stb loader version is not compatible,please update loader! What can I do?Please I need help.

23-03-08, 06:10 PM	#4 (permalink)
solunauk Look into my eyes ... Join Date: Aug 2007 Location: South West UK Posts: 316 Thanks: 6 Thanked 23 Times in 19 Posts	Re: Help, I am stuck Google for "Comag system tool ohne prufung" or "Torax loader" and use that. You can also find both on Maiden's satboard - do a search. Sol

23-03-08, 06:10 PM	#5 (permalink)
arden Senior Member Join Date: Aug 2006 Posts: 471 Thanks: 4 Thanked 13 Times in 12 Posts	Re: Help, I am stuck there are 2 loaders have a look on the other forum for a thread marked Patch guide SL65/SL6512v Ali B1 Chip you will fine both there __________________ tm9100 diablo 2.3 and triax 1.1 motorized cards inc AKTA and Gamma

23-03-08, 07:06 PM	#6 (permalink)
chavestroter Junior Member Join Date: Sep 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Help, I am stuck I loaded truman 1.3.90 and there is no channel signal.When I load back to 1.3.76 old version works.What can I do?Please anyone help me. Ali M3329 B1-Silvercrest SL65

24-03-08, 11:43 AM	#7 (permalink)
arden Senior Member Join Date: Aug 2006 Posts: 471 Thanks: 4 Thanked 13 Times in 12 Posts	Re: Help, I am stuck best guess you used a truman patch that had not been adapted for use on the sl65 can you run it though ali fixer 1.4b? its on the site you got the firmware from __________________ tm9100 diablo 2.3 and triax 1.1 motorized cards inc AKTA and Gamma

24-03-08, 06:24 PM	#8 (permalink)
chavestroter Junior Member Join Date: Sep 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Help, I am stuck I used Alifixer 0.8 on truman 1.3.90 and says no channel signal.Please can anyone send to me 1.3.90 already fixed with alifixer.I do not know anymore what I can do? I found Alifixer 0.4b,but file was missing or invalid,so I used Alifixer 0.8. Please can anyone post here or send to me by "pm"message.Thanks a lot.

24-03-08, 07:16 PM	#9 (permalink)
arden Senior Member Join Date: Aug 2006 Posts: 471 Thanks: 4 Thanked 13 Times in 12 Posts	Re: Help, I am stuck they are there on Maiden's satboard ready converted also the smart mx03 firmware is there as well Ive tried it and confirm it looks better than truman plus side with this the premiere portal works and better epg not just now and next __________________ tm9100 diablo 2.3 and triax 1.1 motorized cards inc AKTA and Gamma

24-03-08, 08:54 PM	#10 (permalink)
chavestroter Junior Member Join Date: Sep 2007 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Help, I am stuck Where Can I find it?How did you patch your receiver with mx03? Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Smart mx03	teumsevich	Comag/SilverCrest	4	27-01-11 05:16 AM
Smart MX03 (v 1.11P9*)	arden	Comag/SilverCrest	1	23-03-08 02:59 PM
Smart MX03 v1.11P3	solunauk	Comag/SilverCrest	0	25-02-08 04:38 PM
cams and smart cards	ewftes1	Dragon/Trex Cam	2	13-07-06 10:42 PM