Please insert smartcard problems?

[reddiesel]

Originally Posted by technovice

hi red, i used the ex c&w image for someone's box i done. but i'm using the tw image but still got the same problems.

Thanks

Thats odd, have you tried ripped hex rhv1 or try changing cam id from aceboobs?

[technovice]

Just tried a card with a RHV1 Eeprom but still no luck. still saying insert smartcard also still not getting any channels freeview ones.

[technovice]

Hi,

Just tried a ATmega card in a 1010T box and works fine Then tried it in a different 1010T box and got ''Sorry' your smartcard isn't inserted properly'' message. so i know it not a problem with the card. but any suggestions for the problem?

Thanks

[spikebaby]

is tb cut on both stbs

[technovice]

Hi spikebaby,

Ones been cut and one hasn't.

[jimbo]

files mixed up, or wrong numbers, or if tb was connected may have been blacklisted.

[spikebaby]

Originally Posted by technovice

Hi spikebaby,

Ones been cut and one hasn't.

so would i be right in saying that the one without tb cut is the one that has the message

as for using a different bin image from another area remember the emm decrpyt keys are different and also the provider info is different ..therefore it wont work

check your bk and double check it ..aslo the rites and expirey dates

[Marc]

Try putting a camid on the image that is relevent to the provider,the camid prefix for Tw is 2C, pure 24, excw 27 ,then create the rest of the camid using letters A-F and numbers 0-9 so for instance 2C126AB4 for tw or 27126AB4 for cw,
Also create the external using toxic but dont reverse the ird,toxic will do this for you.
If you still get problems then it could be the card reader in the box at fault,not uncommon in them boxes.

Btw Hi Spikebaby im here lol

Marc