Dreambox 7020 Service doesn't currently send a signal - Help Please - Page 2 - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

kerrywez · 02-04-08, 12:19 AM

Hi C,
The LNB should be a universal one, and I am quite sure it is, but it should cover all the frequencies high and low. I concur with Jim, it might just be a dodgy LNB so I would say go for a new one and see what happens then. Good luck and I hope it works out for you.

Very best regards Wez

c5005707 · 02-04-08, 02:53 PM

I checked with another dish and lnb but i still can't scan the channels. So I guess it is either the configuration or the tuner of the receiver. If it is the tuner please tell me what type of tuner I should look for.

kerrywez · 02-04-08, 10:58 PM

I think that it should be a DVB S tuner, but wait till someone confirms it. I can't see it being the tuner, after all you are receiving the channels from the other sats. It has got to be something in your settings, in your dreambox. I don't have a 7020, but others have and they might better figure out what the matter is, but it is not the tuner, in my books.

Very best regards Wez

c5005707 · 04-04-08, 12:22 AM

hi kerry..it's me again
I havew tried to reset factory details and connect my receiver directly to the lnb. Unfortunately no luck with this either. I still can't get channels from frequencies 11823+.
By the way when i do the reset I shouldn't lose all the camd and cam config?
When i did this I only had to enter the sat configuration and scan again. Is there any other way to reset my receiver? I just tried it from Expert Setup.

02-04-08, 12:19 AM	#11 (permalink)
kerrywez Grumpy Old Sat Man Join Date: Sep 2007 Location: Co. Kerry, Ireland Posts: 2,471 Thanks: 2,973 Thanked 639 Times in 505 Posts	Re: Dreambox 7020 Service doesn't currently send a signal - Help Please Hi C, The LNB should be a universal one, and I am quite sure it is, but it should cover all the frequencies high and low. I concur with Jim, it might just be a dodgy LNB so I would say go for a new one and see what happens then. Good luck and I hope it works out for you. Very best regards Wez __________________ Dreambox 7025, 250HDD, Dreambox 500s, 110 X 90Cm Hirschmann on Clarketech rotor, 1.2 Mtr. Channel Master. AZBox HD Running on E2. TM6900 super combo.

02-04-08, 02:53 PM	#12 (permalink)
c5005707 Junior Member Join Date: Mar 2008 Posts: 7 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Dreambox 7020 Service doesn't currently send a signal - Help Please I checked with another dish and lnb but i still can't scan the channels. So I guess it is either the configuration or the tuner of the receiver. If it is the tuner please tell me what type of tuner I should look for.

02-04-08, 10:58 PM	#13 (permalink)
kerrywez Grumpy Old Sat Man Join Date: Sep 2007 Location: Co. Kerry, Ireland Posts: 2,471 Thanks: 2,973 Thanked 639 Times in 505 Posts	Re: Dreambox 7020 Service doesn't currently send a signal - Help Please I think that it should be a DVB S tuner, but wait till someone confirms it. I can't see it being the tuner, after all you are receiving the channels from the other sats. It has got to be something in your settings, in your dreambox. I don't have a 7020, but others have and they might better figure out what the matter is, but it is not the tuner, in my books. Very best regards Wez __________________ Dreambox 7025, 250HDD, Dreambox 500s, 110 X 90Cm Hirschmann on Clarketech rotor, 1.2 Mtr. Channel Master. AZBox HD Running on E2. TM6900 super combo.

04-04-08, 12:22 AM	#14 (permalink)
c5005707 Junior Member Join Date: Mar 2008 Posts: 7 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Dreambox 7020 Service doesn't currently send a signal - Help Please hi kerry..it's me again I havew tried to reset factory details and connect my receiver directly to the lnb. Unfortunately no luck with this either. I still can't get channels from frequencies 11823+. By the way when i do the reset I shouldn't lose all the camd and cam config? When i did this I only had to enter the sat configuration and scan again. Is there any other way to reset my receiver? I just tried it from Expert Setup.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Astra 28E Problem	jontydog	Satellite Help	30	05-10-09 07:52 PM
Advanced Windows skills	AhmedMostafa257	Internet	14	12-12-08 01:43 PM
Dish Setup	Redman	Satellite Help	6	30-09-06 10:03 AM