Ronsters Guide To Flashing Box For Newbies

[gerbil25]

hi all
please could sum1 help me out and tell me where to get the latest firmware for the eurovox ex1000 sick of putting new codes in

[smcg]

Newbie here!!

How do you know if you need new software?? I have eurovox ex5000 pvr and codes updating...........last updated july 08???

Sorry to be a dip **** but could do with some advice

Thanks in advance

[ronster]

Box only really needs updating when theres a keyroll method change like april & november 08,or if theres been some new improved features for the box

You will know when it needs updating as you'll get the "please wait code updating" message..permanently...as the box cant update the keys..

Also you'll notice that this site will be invaded "and ruined" by 2,3,4 thousand leaches all asking for keys....

[creeper]

hi i hope u can help me i have a eurovox blue i have flashd it and now when i turn it on it just comes up with 696f can u help me pls

[jiteshpatel]

[quote=ronster;145592]Heres a quick guide for all those who have never flashed them before.

upload your channel data first and save to desktop or you will have to do a fresh scan
If your not sure which box yours is blue or red look at the box from above and you will
see the tuner on the right,were the cable feed goes in.
The blue 06 box tuner will measure 12 slots in the grill/slots and the red 07 will measure 8
1.connect your box to pc with the rs232 ports using a null modem cable (pictured) available from lincsat for a
2.plug your box in, it dosnt matter if its in standby
3.open the new firmware and click on download and it will search you ports for a eurovox
once found click ok/yes and it will start to download,takes about 3 mins
thats it it really is that simple
if your box is a clone dont use this firmware it''ll brick it

if your box is a clone use the latest clone friendly firmware and flash it this way using dnupman


I have managed to download following firmware to my eurovox MaxV 2008 UFL_MAX_V_Autosort_5_12_08 done fast install and deep scan 5times but still dont get all the channels can you please help me?

[jiteshpatel]

hi i have loaded new firmware but dont get all the channels as before i dont get any asian channels and few others. M getting 135 channels only now do u think i have done something wrong? I loaded the firmware as below
UFL_MAX_V_Autosort_5_12_08
done all manual scan fast scan and deep scan but dont get all the channels

[nicky_46]

I'm also having problems. lost most channels last year some time. still not able to update. if i put my cable in the com port it turns my whole computer off. i have managed to get a usb cable but i have no driver for my EX5000PVR so i cant get any further, please help !!!!!

[Smurf]

Is it a clone or genuine box mate? And u dont need drivers for ur eurovox u need it for your usb com port.

[smcg]

hey all

going to go insane!!!!!!

read all the guides but still cant get my 5ooopvr flashed?? get to the final stage but wont download. I had it 55% downloaded and thats the most ive had?? I can get the channel info from the eurovox via voxer but cant install new filmware?? box says dnld but nothing happens on the download.

Please help if anyone knows what i am doing wrong???

[whatsup]

Hey

Does anyone now where i will get the firmware for a eurovox maxv clone red '07.......

cheers