Multivision TPS

[Analoguesat]

Enjoy MV whilst you can - it will be discontinued in a couple of months!

[jonjlp]

Thanks bigtee.Have tried all those channels you suggested on 13E 10870 (i dont have 10873?).
Even on M6 Black,France 4 etc they dont open up but remain scrambled.
Switched set off and on a few times and have actually opened M6 for about 30secs all ok then pic freezes and comes up scrambled again!!!!!!!!!!!
NB some chans on that tp (10870)say scrambled,some just black screen.Like i said before, signal strength 80% and can view nearly all other scrambled chans on 13E.
Is setting time that important?Every time i switch receiver off i then have to re-set time.

[Miklos]

TPS has gone from my system altogether now

Signal is still there but the programmes remain scrambled and despite numerous attempts I cannot get it to open again!!
The receiver has been powered down and back up again more times than I can remember. Last night it opened Sci-FI for about 1 minute then the picture froze and the channel went off and 'scrambled channel' was displayed.

What could be wrong with my receiver/CAM if you guys are still receiving TPS/Multivision on 13.0E?

[bigtee]

They say that on some receivers the frequency has to be strictly 10873; so, try deleting the 10870 and reenter it as 10873 then rescan. I have to say, though, that 10871 works well to open TPS on my TM 1500 and I'm watching Tennis even now on Sports+, so TPS is still open on some TMs.

[Robbo]

Originally Posted by jonjlp

Thanks bigtee.Have tried all those channels you suggested on 13E 10870 (i dont have 10873?).
Even on M6 Black,France 4 etc they dont open up but remain scrambled.
Switched set off and on a few times and have actually opened M6 for about 30secs all ok then pic freezes and comes up scrambled again!!!!!!!!!!!
NB some chans on that tp (10870)say scrambled,some just black screen.Like i said before, signal strength 80% and can view nearly all other scrambled chans on 13E.
Is setting time that important?Every time i switch receiver off i then have to re-set time.

From what I have read, the time has to be correct for the AU to work.

[jonjlp]

Success at last!!!!!!!!!!!!!!
Thanks everone what a great forum!
TPS,Multivision all up and running fantastic.
Great advice from all.
Anyone having similar problems as i did try this:-
a) Make sure clock is set
b) Make sure to scan TP10.873 (mine was scanning @ 10.870, makes all the difference in the world!)
Thanks again

[jonjlp]

Hi Miklos.
I had similar problem but now all ok.
My original TP was 10.870 so i rescanned at 10.873 now receiving all TPS,multivision etc.Hope it works for you.Great viewing.Good luck!!!!!!!!!

[Miklos]

Originally Posted by jonjlp

Hi Miklos.
I had similar problem but now all ok.
My original TP was 10.870 so i rescanned at 10.873 now receiving all TPS,multivision etc.Hope it works for you.Great viewing.Good luck!!!!!!!!!

Still can't get TPS back on. It was working fine all week last week, nothing has been changed as far as my system was concerned ~ but now, nothing but 'scrambled programme' being displayed

I've gone through every frequency you can think of from 10.866 V 27500 to 10.879 V 27500. I had Sci-Fi up briefly on 10.876 but after 2 minutes or so, it froze then black screened and the blasted 'scrambled programme' was displayed again.
My time & date is correct and the receiver has been powered down and back up again more times than I can remember.

Gave it up as a bad job now (much to my annoyance....)

At least I can still get the PREMIERE package on Astra1, with PREMIERE HD being the only channel on there to broadcast movies in English :~(

[Robbo]

Originally Posted by Miklos

Still can't get TPS back on. It was working fine all week last week, nothing has been changed as far as my system was concerned ~ but now, nothing but 'scrambled programme' being displayed

(

Is this using the Dragon CAM?

I know nothing about it, but have you the latest software?

and by the way some of the Premiere Direkt movies have English audio as well.

[Mickha]

TPS has been down on the Dragon/T-Rex cam for a few days, and there are reports that some patches aren't working either, but as some other patches, and the Diablo cam, are still working there should be a fix soon.