Titanium Card keys update problem

[liamroe]

what box is it

[reddiesel]

Originally Posted by ahlone

Hi Everyone,
I have a Titanium2 Card which was working before the rececent keys change by VM. After reading in this forum I can get the card reprogrammed but i don' have BK. I have got the IRD. I am using Pheonix Unlimited programmer, it detects the card as titanium2. If I put it in Pheonix mode, and try to read the card from Nagraedit4 following message comes,
***********
Opening of COM2 was successful
ATR String:
ROM Revision: 010
EEPROM Revision: RevA32
SetIFS failed
Using BD3 Key:
Reading ROM10 failed
Closing of COM2 was successful

************
I tried Titanium loader it identifies the OS as
*
*
and if I use titanium loader 2 following message comes,
*
ATR : No ATR !
unsupported Titanium OS found.
*

And in the end if I try to read this card using Infinity Unlimited, only write and erase optios are available not READ.

I have given as much detail as i could, All I want is my BK to reprogram the card. Is there a way to get BK other than Jtag, I have searched BK database as well but no luck.
Desperately waiting for reply!
Please do not post any keys
Read the rules

Try reading it in nagra 4.1.

[ahlone]

Thanks for replying. The Box is Pace Di-4000-T and I tried nagra 4.1 as well but no luck.

[Marc]

Theres also a new tit1 and 2 fix out for the cards to au now,

Marc

[ahlone]

Originally Posted by Marc

Theres also a new tit1 and 2 fix out for the cards to au now,

Marc

Sorry Marc, couldn't understand what do you mean by 'au'

[Marc]

Automatically update ie you dont have to enter the keys

Marc

[ahlone]

Thanks guys I finally got the BK by using XCNS 1.8. Reading forum postings will help! I downloaded titanium1+2 loader and associated files. I used infinity USB unlimited to load the files in to card as i was getting 'writing flash error' in titanium2 loader. It did give checksum error 4 in infinity but i ignored it and it did write the card. Now in pheonix mode I did the Winexplorer thing, which worked with no errors . Now the problem is when I put this card back into box, the box is still saying You have no valid subscription. It looks like the AU function on titanium2 card is not working.
Is there any Cryptkey.hex in which you can put the new keys manually and you don't have to do the Winexplorer thing? Please reply.

[billalahmed007]

Originally Posted by Marc

Automatically update ie you dont have to enter the keys

Marc

if a flash is "au" does it mean you dont have to include the ird and bk keys? do you upload anything for the exteep? cheers m8.

[sqwidge]

Originally Posted by Mike22

put the card back in the box and unplug the box. go into 'engineers menu' by holding the up and down arrow keys on your box, at the same time plug the power cable back in!! ...keep holding the arrow keys till the screen changes. the engineers menu should appear... go to the section where it says NAGRA SERIAL CODE = this is your box key mate!!

Now have fun progging your card...

I thought nagra serial was IRD not BK

[adjbeatbox]

Originally Posted by sqwidge

I thought nagra serial was IRD not BK

It is m8!
Dont know where this post got lost, but the guy seems to have worked it out anyways...
Good on you m8 for reading past posts, and catching up quickly...
Also, if you ever get that again m8 (No Atr), there are ways(TIT1&2 ONLY) of repairing the card, depending on what programer you have, and if you have the BK of the box (as above IRD can be determined from the eng menu either by using bke v2.2 or windows scientific calc)
Regards, Beatbox