Titanium Card keys update problem - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

ahlone · 12-04-08, 10:34 AM

Hi Everyone,
I have a Titanium2 Card which was working before the rececent keys change by VM. After reading in this forum I can get the card reprogrammed but i don' have BK. I have got the IRD. I am using Pheonix Unlimited programmer, it detects the card as titanium2. If I put it in Pheonix mode, and try to read the card from Nagraedit4 following message comes,
***********
Opening of COM2 was successful
ATR String:
ROM Revision: 010
EEPROM Revision: RevA32
SetIFS failed
Using BD3 Key:
Reading ROM10 failed
Closing of COM2 was successful

************
I tried Titanium loader it identifies the OS as
*
*
and if I use titanium loader 2 following message comes,
*
ATR : No ATR !
unsupported Titanium OS found.
*

And in the end if I try to read this card using Infinity Unlimited, only write and erase optios are available not READ.

I have given as much detail as i could, All I want is my BK to reprogram the card. Is there a way to get BK other than Jtag, I have searched BK database as well but no luck.
Desperately waiting for reply!
Please do not post any keys
Read the rules

Mike22 · 12-04-08, 11:41 AM

put the card back in the box and unplug the box. go into 'engineers menu' by holding the up and down arrow keys on your box, at the same time plug the power cable back in!! ...keep holding the arrow keys till the screen changes. the engineers menu should appear... go to the section where it says NAGRA SERIAL CODE = this is your box key mate!!

Now have fun progging your card...

ouzi1212 · 12-04-08, 12:20 PM

do you know how to get the engineers menu on pace 2000 box?

ahlone · 12-04-08, 12:24 PM

Thanks for such a quick response. Are you sure Nagra serial code is BK not IRD? Please confirm.

ouzi1212 · 12-04-08, 12:26 PM

have you opened the engineers menu

ahlone · 12-04-08, 12:32 PM

Yes I have , I can see the MAC code and Nagra serial code which is 12 ** and it is my IRD.

ouzi1212 · 12-04-08, 12:33 PM

look for your boxkey

ahlone · 12-04-08, 12:49 PM

There are 17 pages and I have checked all of them but I am unable to see the box key..Page 2 is where I can see NetID, GroupID. Mac Address, Nagra Serial Code etc but no BK..

ouzi1212 · 12-04-08, 03:03 PM

check the Nagra Serial Code

ahlone · 12-04-08, 05:39 PM

Nagra serial code starts from 12 ** ** which us my IRD. Is there a way to read Titanium Card as I am unable to read it. Or any other way to get BOx Key?

12-04-08, 10:34 AM	#1 (permalink)
ahlone Junior Member Join Date: Jan 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Titanium Card keys update problem Hi Everyone, I have a Titanium2 Card which was working before the rececent keys change by VM. After reading in this forum I can get the card reprogrammed but i don' have BK. I have got the IRD. I am using Pheonix Unlimited programmer, it detects the card as titanium2. If I put it in Pheonix mode, and try to read the card from Nagraedit4 following message comes, ********* Opening of COM2 was successful ATR String: ROM Revision: 010 EEPROM Revision: RevA32 SetIFS failed Using BD3 Key: Reading ROM10 failed Closing of COM2 was successful ********** I tried Titanium loader it identifies the OS as * * and if I use titanium loader 2 following message comes, * ATR : No ATR ! unsupported Titanium OS found. * And in the end if I try to read this card using Infinity Unlimited, only write and erase optios are available not READ. I have given as much detail as i could, All I want is my BK to reprogram the card. Is there a way to get BK other than Jtag, I have searched BK database as well but no luck. Desperately waiting for reply! Please do not post any keys Read the rules Last edited by Mickha; 12-04-08 at 01:27 PM. Reason: removing keys

12-04-08, 11:41 AM	#2 (permalink)
Mike22 Junior Member Join Date: Mar 2008 Posts: 26 Thanks: 1 Thanked 1 Time in 1 Post	Re: Titanium Card keys update problem put the card back in the box and unplug the box. go into 'engineers menu' by holding the up and down arrow keys on your box, at the same time plug the power cable back in!! ...keep holding the arrow keys till the screen changes. the engineers menu should appear... go to the section where it says NAGRA SERIAL CODE = this is your box key mate!! Now have fun progging your card... __________________ "the most beautiful thing we can experiance is the mysterious!"

12-04-08, 12:20 PM	#3 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 867 Thanks: 6 Thanked 178 Times in 174 Posts	Re: Titanium Card keys update problem do you know how to get the engineers menu on pace 2000 box?

12-04-08, 12:24 PM	#4 (permalink)
ahlone Junior Member Join Date: Jan 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Titanium Card keys update problem Thanks for such a quick response. Are you sure Nagra serial code is BK not IRD? Please confirm.

12-04-08, 12:26 PM	#5 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 867 Thanks: 6 Thanked 178 Times in 174 Posts	Re: Titanium Card keys update problem have you opened the engineers menu


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

12-04-08, 12:32 PM	#6 (permalink)
ahlone Junior Member Join Date: Jan 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Titanium Card keys update problem Yes I have , I can see the MAC code and Nagra serial code which is 12 ** and it is my IRD.

12-04-08, 12:33 PM	#7 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 867 Thanks: 6 Thanked 178 Times in 174 Posts	Re: Titanium Card keys update problem look for your boxkey

12-04-08, 12:49 PM	#8 (permalink)
ahlone Junior Member Join Date: Jan 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Titanium Card keys update problem There are 17 pages and I have checked all of them but I am unable to see the box key..Page 2 is where I can see NetID, GroupID. Mac Address, Nagra Serial Code etc but no BK..

12-04-08, 03:03 PM	#9 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 867 Thanks: 6 Thanked 178 Times in 174 Posts	Re: Titanium Card keys update problem check the Nagra Serial Code

12-04-08, 05:39 PM	#10 (permalink)
ahlone Junior Member Join Date: Jan 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Titanium Card keys update problem Nagra serial code starts from 12 which us my IRD. Is there a way to read Titanium Card as I am unable to read it. Or any other way to get BOx Key?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curious - Star view box calculates 99.9% of new keys automatically.	tvman	Eurovox	10	13-07-08 12:00 PM
MERGED: manual key entering + assorted problems	serviceman	DBox	879	03-05-08 09:09 PM
programming card problem	sonic1	Cable TV Chat	1	01-12-07 05:44 PM
tps keys infomation	clipper	Satellite News	5	10-07-07 07:47 PM
Dun code for windows	Realist	PC Hardware	4	06-03-06 02:36 AM