sagem dbox wont boot

[scot2bu]

hi there, after the dbox's crashed i uploaded the mg_cfg image file to my dbox via ie. now my dbox wont boot, can any1 help?

[winker]

Do you have a 1x or 2x Sagem (Nokias are all 2x), and did you upload the corrent image type (1x or 2x).

If you loaded the wrong type then all is not lost, just use Image Flashing Assistant to load a new image.

[scot2bu]

hi, its the 2x, and i flashed it using ie, i couldnt get it to connect via flashfxp and am not to sure where i flased it to. when the box boots the small screen on the box lights up with a few lines then goes blank. av read on the net that if you hold the up button and power up it then allows you to be able to connect to again, this work but still have now idea where to flash to, help would be much appreciated, thaks

[johny48]

hi mate
use image flashing assistant (IFA) to revieve your box its the only way to get you box up and running again
cheers johny48

[turner123]

any help with a dbox sagem etc pm i will get you going again and point you in the rite direction

[ahlone]

Hi,
I have got Sagem dbox2, When I try to update the keys using remote, it doesn't save the changes. I tried to upload via crossover cable/FTP but it says Error: NO SPACE LEFT ON DEVICE. ALso if i telnet and try to manually remove keylist.txt, it gives same message, no space left on device. Can some one explain please whats wrong wiht the box? is debug mode on or off? Or is there any other problem? Will this box let me flash new image?

[johny48]

Originally Posted by ahlone

Hi,
I have got Sagem dbox2, When I try to update the keys using remote, it doesn't save the changes. I tried to upload via crossover cable/FTP but it says Error: NO SPACE LEFT ON DEVICE. ALso if i telnet and try to manually remove keylist.txt, it gives same message, no space left on device. Can some one explain please whats wrong wiht the box? is debug mode on or off? Or is there any other problem? Will this box let me flash new image?

your image has gone read only you will have to put a new image on, it should be ok after that
cheers johny48

[tweety]

there is any problem with the dbox
when you telnet the dbox
write df -k

in my dbox
Next-Generations Image Sagem D-BOX2 - Kernel 2.4.31-dbox2 (17:02:35).
dbox login: root


BusyBox v1.01 (2005.11.13-16:19+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/var # df -k
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 7936 7476 460 94% /
/var #


if you have more tan 95% used you are not able modifiying anything


the solution is flash dbox again with IFA

[frankieyeha]

has any1 got a galaxis premiere easy world kabel box how do i get it up and running.