original ntl cards

[clarkyj]

Can these be modded or flashed, if so how difficult, would nt mind giving it a go , sucessfully flashed, fun, opus, titanium 1 and 2 cards, and j tagged pace and a sammy. Would like to go up a peg or two wit these guys, All feedback greatly appriciated

[sal]

i would like to know what is needed,i have the unlooper,i can run the unlooping scripts but,i got a boc one i need unlocking.the boc script runs weird.

also i read that win exporer should ask you when you want to unloop/unlock and to write an image to the card to keep it unlocked.

i just cant seem to find anything bar scripts and winexporer and it dosnt seem to run the way it is supposed to.

[Mike22]

@ Clarky:

the ntl cards are also known as a MOSC (Modified Original Smart Card) and yes they can be programmed with an image to use if it's an unlocked card.

If it's locked you will have to go through the vigerous stages of unlooping (unlocking) the card with a specific script depending upon the revision of the card! - it's not easy if your a newbie to doing them! - but good learning!

@ Sal:

Use Nagra edit 4.1 to write images to rom cards if you have sucessfully unlooped them

[sal]

this card isnt unlooped by the looks of things:
Opening of COM1 was successful
ATR String:

ROM Revision: 011
EEPROM Revision: RevB0C
ProviderID: 5C
CamID:
Using BD3 Key:
Attempting to login to BD3
Unable to login, bad password detected
Login attempt aborted
Reading ROM11 failed
Closing of COM1 was successful

it asked me for a password for backdoor or something which i didnt know so i had to close.i tried a couple of other cards i had put through the unlooper and they read fine in nagra.this one didnt.

what is the problem here anyone?

[spikebaby]

use xncs for the bdoor keys or use the dc2 bdoor file,

if using xncs go to settings tick all apart from ghost must be in eeprom read card blue button look in eeprom line co4o there is your bdorr keys

[sal]

nah,when i use xcns it just says its thing then gives up.

i ran a script and this is what i get:
Executing Script: C:\Documents and Settings\sal\My Documents\Cable for Dummies\basics to glitching\Scripts\rom11 unlocker.xvb
________________Setting up WinExplorer_________________
IRD: 00000000
TX Data : 19 03 15 60 10 21 00 0D A0 CA 00 00 07 21 05 06
03 FF FF 00 20 40 0E 05 9F 00
RX Data : 19 20
RX Data : 12 60 20 A1 1E 5C 00 00 27 08 04 05 FF FF FF FF
FF FF FF FF FF FF 00 FF FF 00 00 FF FF 00 00 00
Trying to Unlock the Rom 11.....
INITIAL PARAMETERS
Glitch Delay = 00E9
VCC = 30
Glitch Type = 09

Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read, Continuing Script

Script Error on Line 166
Sc.GetByte: Requested Byte Exceeds Last Read Request

this is the first boc i am trying.i can do bod without too much trouble.

i am using ubomb+

any suggestions would be nice.

thanks.

*edit*
yesterday before i even tried unlooping the card it said the cards staus was paired on the eng menu,today after messing with it the card now says never paired.

solution?