Kuro 3 Update times

[radaudiodesigns]

New software on the box, which seems to be updating codes automatically, sometimes takes longer than others, but eventually channels come back.

I was wondering what sort of times you guys are seeing it take to update.

Also, there doesnt seem to be any point in sorting channels as when the code updates, all the channels seem to go back to the softwares "suggested" favourites.

Any advice?

[gazlw]

telewest..wigan area on sky sports 1 codes took 3-4 minutes to update. this has been the case for the last year or so

[jamiejamie230]

hi, i think u fine it depends on what channel you on when your updating the code. if your on a channel with a higher frequency then it takes a little longer..

ive found that a channel like ITV4 is one of the best for updating it quickly, i am also tele#*st..

Hope this helps

J4M1E

[racecoursepete]

Originally Posted by jamiejamie230

hi, i think u fine it depends on what channel you on when your updating the code. if your on a channel with a higher frequency then it takes a little longer..

ive found that a channel like ITV4 is one of the best for updating it quickly, i am also tele#*st..

Hope this helps

J4M1E

ex c&w on sp1 about 2 mins max. manchester area

[lucky13]

Over the water here we've had 5 keyrolls since 4.30pm. Each time the box took bout 2/3 mins to update. If the box is on when the keys roll the 'Insert Smart Card' message displays and stays until you either change channel or switch off and on the box. Once done it the moves on to 'code updating'.

My favs have not been affected and I have now been through 10/11 keyrolls since updating the firmware last Saturday

[goty2001]

NTHELL DUBLIN

New firmware working fine ... except - timings have gone haywire. I used to be an hour out - the program lists/EPG seem to relate to another day or something. Did the update cause som big offste here? Any solution? Thanks.

[racecoursepete]

Originally Posted by goty2001

NTHELL DUBLIN

New firmware working fine ... except - timings have gone haywire. I used to be an hour out - the program lists/EPG seem to relate to another day or something. Did the update cause som big offste here? Any solution? Thanks.

search the forum for the time problem. i'm pretty sure you have to manually set the time and date then save then unplug your box and plug back in again. should be sorted then

[dino]

Originally Posted by radaudiodesigns

New software on the box, which seems to be updating codes automatically, sometimes takes longer than others, but eventually channels come back.

I was wondering what sort of times you guys are seeing it take to update.

Also, there doesnt seem to be any point in sorting channels as when the code updates, all the channels seem to go back to the softwares "suggested" favourites.

Any advice?

N*l having great fun rolling the codes, was a bit worried, mines a max V, took over 10 mins to update, my dad has a blue 2006 and no problems updating, took around 30 seconds.