Diablo Light Cam - newbie query

[yat360]

Originally Posted by Mickha

Stealth 248 will currently give you:
Premiere 19E
TPS 13E
Polsat 13E
Sex View 13E
Digi TV 1W

Underworld 106 will currently give you:
Premiere 19E
Polsat 13E
Sex View 13E
Digi TV 1W
Canal Digital 1W

As you can see it is a straight forward choice between TPS and Canal Digital, check lyngsat for which package you might prefer.

Hi Mickha,

Received my Cas 3+ but no instructions. Managed to download Cam studio, connected it all and the Diablo is now comunicating to my laptop. Where do I put Stealth?? I have two folders: Config and Menu? Do I need to move keys file too??

ThanKs
David

[Mickha]

Programming the Diablo with the Cas 3 is very easy.
Insert your Cam into the Cas 3.
Start up the software.
Click on the Cam Module tab, and the 2 Diablo icons, this starts the Diablo software.
If you want to format your Cam, usually best if updating to a new Stealth or Underworld file, then click on the Cam Disk Functions tab and format.
Once formatted click on the Upgrade Cam tab.
Click on the little icon, with 3 dots, at the end of the File Name address bar, navigate to the Stealth or Underworld .dup file, and open.
The green light should now be on the start update icon, click this and wait for it to complete.
Once this is completed you can exit and insert the cam into your receiver.
You now need to alter the configuration settings.
Go into the Cam menu, using your receivers remote control.
Enter Stealth 248, and Enter the Configuration folder.
Alter the settings so:
Auto PMT ON
Emulators ON
N2 AU ON
Emulators Priority 1 Emu 2 Card
Fixed CW ON
Everything should now work.
If you want to update the keys.bin file, insert your cam into the Cas programmer, start up the Diablo software.
Click on the Cam File System tab, and connect.
In the left hand panes navigate to the new diablo keys.bin file, highlight it and click the green arrow pointing right, click yes to overwrite and it's done.

[yat360]

Originally Posted by Mickha

Programming the Diablo with the Cas 3 is very easy.
Insert your Cam into the Cas 3.
Start up the software.
Click on the Cam Module tab, and the 2 Diablo icons, this starts the Diablo software.
If you want to format your Cam, usually best if updating to a new Stealth or Underworld file, then click on the Cam Disk Functions tab and format.
Once formatted click on the Upgrade Cam tab.
Click on the little icon, with 3 dots, at the end of the File Name address bar, navigate to the Stealth or Underworld .dup file, and open.
The green light should now be on the start update icon, click this and wait for it to complete.
Once this is completed you can exit and insert the cam into your receiver.
You now need to alter the configuration settings.
Go into the Cam menu, using your receivers remote control.
Enter Stealth 248, and Enter the Configuration folder.
Alter the settings so:
Auto PMT ON
Emulators ON
N2 AU ON
Emulators Priority 1 Emu 2 Card
Fixed CW ON
Everything should now work.
If you want to update the keys.bin file, insert your cam into the Cas programmer, start up the Diablo software.
Click on the Cam File System tab, and connect.
In the left hand panes navigate to the new diablo keys.bin file, highlight it and click the green arrow pointing right, click yes to overwrite and it's done.

Thanks Mickha,

Managed to get the Premiere channels working on Astra 19.2 but it seemed to last all of five minutes!! all is scrambled again!

Any suggestions?

Thanks and regards
David

[Mickha]

If you have any problems try changing channel or removing and re-inserting your cam, if this problem persists try turning off N2 AU, after the channel opens, this stops the keys trying to update constantly.

[yat360]

Originally Posted by Mickha

If you have any problems try changing channel or removing and re-inserting your cam, if this problem persists try turning off N2 AU, after the channel opens, this stops the keys trying to update constantly.

Thanks Mickha. Back on!

[yat360]

Originally Posted by yat360

Thanks Mickha. Back on!

Stealth doesn't open anything on 13E at all!!! 19.2 still fine.

[Mickha]

To open TPS on 13E you have to tune your receiver to Sci Fi France, or other channel using 10873 V 27500:
_http://www.lyngsat.com/packages/tps.html
This allows the keys to update, once it opens you can browse the other channels in the package.
Polsat should be AU, so if you have N2 AU turned ON in the configuration menu, and leave it on one of their channels it should open within a few minutes, sometimes it takes slightly longer.
If you have left the smartcard message turned ON, and you see this message you know the Cam is working.
For TPS you need the Stealth file, for Canal Digital you need the underworld file.
Sex View I believe is down.

[brian mc]

Originally Posted by Mickha

I advise you to get the Cas 3+ as updates are quite regular.
You were advised correctly in getting the Diablo as it currently opens a lot more than the Dragon cam.
You can find both the Stealth and Underworld firmware on the internet, and if you look in the UK Cable section, Private FTA sub section and read the first two sticky threads by lincsat you will discover links to all the satellite software required.
The Diablo 2.2 is now the older version of the cam as a new cam has been released which holds more memory for the new channels available, with the 2.2 we have a choice of loading a Stealth file for TPS 13E, or Underworld for Canal Digital 1W, the new cam can include both.
Both Stealth and Underworld also currently open Premiere 19E, Polsat and Sex View 13E, and Digi TV 1W, so there is currently a lot of viewing options.
Which satellites can you receive? Do you have a fixed or motorized dish?

Hi i'm a newbie too and have the same receiver however mines is fixed and is positioned under the sky channels/freesat set up. I can receive the cannels from astra 28.2 - is it possible for me to use the diable too and will i have to get the same software etc

[Mickha]

The Diablo will not open any channels on 28.2E, it can work with a legitimate S*y subscription card but will only open the channels that are paid for and will not interpret the stay alive signal so the card has to be returned to the digibox every 4-6 weeks.
The Diablo 2.3, loaded with the latest underworld file, will currently open the following main packages:
Premiere 19.2E
DigitAlb 16E
Polsat 13E
Canal Digital 1W
Digi TV 1W.

[megamagnum]

Hello everybody

My first post in this forum.

I know that there is available couple of different kind of diablo cam types, lite, wifi and someting else.

Which one would be easiest to use if i want just to see 1w sport...channel?

I do not know that kind of benefit this wifi version gives compared with lite. Also i suppose to purchase cas3+ in both options.

thx in advance