Channel Master 3041221 Elliptical Dish 36" x 27"

[daryaz]

Item number: 300217042191

Iam looking at purchasing a good quality dish so that i can receive 16e for the footie next season. Was wondering if this one was any good, its only down the road from me.

Advice would be much appreciated.

[Jimdefruit]

If that is a Channel Master then I am a man from Holland. At least it is nothing like any Channel master I have ever seen.

Someone else may recognise it and confirm its value.

[SAT-WORLD]

It may be this dish

[rd100]

Well you must be from Holland then this is a ASC signal/Andrew/Channel master dish and a very good one i have installed loads of these you can scew the whole dish this is the rx/tx version you can use it for rx only just attach the c120 lnb direct to the feedhorn with out the omt, but you can buy a rx only version,

http://www.ascsignal.com/images/cont...20755TX%20.pdf

Originally Posted by Jimdefruit

If that is a Channel Master then I am a man from Holland. At least it is nothing like any Channel master I have ever seen.

Someone else may recognise it and confirm its value.

[Jimdefruit]

Thanks for the info rd100 but it is only an Andrews dish because asc signal recently took over Andrews. The actual design is asc signal and not the Andrews design.

[rd100]

Wrong ASC has just taken over and they have never made rx/tx dishes before asc had .pdfs sent over from Andrew and asc signal logos and address where added where the Andrew logo and address would normally be also with all the patent designs as well where registered under asc,

That dish type still has channel master molded in to the back be it channel master or Andrew or asc signal are all the same all made in the same molds in the factory they will have the mold number printed on the back as the molds have never been changed,

Even when Andrew where running the show the still had channel master molded in the the back but the Andrew thunder bolt logo on the front it is still the same now ASC signal are still selling Andrews / Channel master SMC branded dishes as the are are all made in the same molds,

I have also checked in our warehouses today as our company are the main importer of ASC signal / Andrews dishes in the UK from 43cm Rx tx up to 16m earth stations and that dish type still has channel master molded in the rear of the dish,

Originally Posted by Jimdefruit

Thanks for the info rd100 but it is only an Andrews dish because asc signal recently took over Andrews. The actual design is asc signal and not the Andrews design.

[fcukbcfc]

i have one of this in my shed bought it as a broadband sat dish.
model number NJR2184F
and was wondering if i could us it for 28east as the old sky dish has seen better days.
i do have a invacom c120 twin LNB share if it would work.

[rd100]

Yes it will work fine just take the omt & buc & njr lnb off and bolt your c120 lnb direct to the feed horn then you scew the whole dish to scew the lnb.

Originally Posted by fcukbcfc

i have one of this in my shed bought it as a broadband sat dish.
model number NJR2184F
and was wondering if i could us it for 28east as the old sky dish has seen better days.
i do have a invacom c120 twin LNB share if it would work.

[fcukbcfc]

thanks for your answer rd100 cheers.