tit 2 update help

[vaprp]

Hi all.., ned help

I have a tit2 card which was working until all changes.
Understand there is au. I have downloaded this.. Now what do I do?

Have unlimited infinity programmer.

Thank in advance..

[5av1dg312]

Following info from Bigmaq toolbar from cable files.


How to Program 'Titanium 2' Card:

Programs/Software Required:
1. Titanium 1+2 Cardprogger (including files linked to this)
2. Nagra Edit
3. Winexplorer
4. Phoenix Programmer

Step One:
Make sure programmer is set to phoenix mode (3.58 mhz) and then insert titanium2 card.
Step Two:
Run 'Titanium 1+2 cardprogger', Identify card should come up as 'OS: 02.01 ATR: ******************'
Step Three:
Although not essential...do it anyway....erase card....progger will go through motions and
come back as card in 'virgin'state.
Step Four:
Load Flash (Tit2_Nagra_emu_hex.hex)
Load EEprom (Tit2_Nagra_emu_eep.eep)
Load CryptKey (Tit2_Nagra_emu_CryptKey.hex)
Step Five:
Click on 'Program'
Card will now program the card with the files selected......once this is complete close the software.
Step Six:
Now you must create a .bin image for your card.........
Run Nagra edit and load the relevent .bin image for your area from the 'bin images' folder....insert your IRD and BK
in the relevent boxes in 'data editor'.....DONOT ALTER ANY OTHER DETAILS IN IMAGE....some people find entering IRD backwards
works others will find putting it in straight will work (straight = 12 ** ** **, backward= ** ** ** 12)...
save the image with a name u will remember eg...my_bin_image.bin
close nagra edit.
Step Seven:
Run Winexplorer......load script 'loadeep' (found in 'Tit2 Nagra emu' folder).....run script...when prompted load the image u have saved
in previous step (eg....my_bin_image.bin).....once script has finished close all programs and remove card from programmer.
Step Eight:
Switch Cable STB on and wait for screen to tell you to insert card....insert card....wait approx 30-60 seconds whilst card updates and then change channel
using remote.....
Voila!!!!!!! u have a working AU Titanium2 Card
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Although this tut is written by myself....all thanks and recognition must go to all members on all-forum and cable-uk for their contributions over the last
few months and great thanks to the actual sofware/program writers....(u know who u are)..
The above method has been used by myself with success.....but may not work for everyone...i take no responsibility for this and can only wish everyone
the best of luck

BigMAQ
-----------------------------------------------------------------------------------------------------------------------------------------------------------