debug mode - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

addyb · 23-04-08, 07:39 PM

i have a samsung 2100 running version 3.6 software, i follow all the instructions, but what ever i do, it wont go into debug mode...

i hold down button in wen i see ld:20, let go wen i see Ld:40... my display goes back to ld:00 and all the way round again, throgh he ld numbers then the PL numbers and finally the through the AP numbers with the light turning green around AP:30

i tried a secong box, also running 3.6 and it does the exact same thing... i know u'll most prob think am doing something wrong, but i really aint... is this because they are running 3.6 firmware? if so, how do i get into debug mode?

mancmw · 23-04-08, 09:03 PM

my samsung did that but when i force updated it then held the down button i got the green light and it worked lol

addyb · 23-04-08, 09:52 PM

Quote:

Originally Posted by mancmw

my samsung did that but when i force updated it then held the down button i got the green light and it worked lol

i've got the latest version though, 3.6... i cant update any more... surely?

and how do u force an update?

mancmw · 23-04-08, 10:06 PM

i doubt it will work then but it was what i did on 1 box i forced an update by holding standby left right and ok and the other i disconnected the battery for 5 mins then pluged the box back in and tht one worked

addyb · 23-04-08, 10:24 PM

well i just reset the net id, causing it to run the update again, but still nothing...
:s

am stuck... has anyone else got a samsung 2100 with 3.6 on it?

addyb · 24-04-08, 08:58 PM

it does seem that 3.6 does not activate 'debug mode' the same way the earlier versions did. i could not get into debug mode at all, so i changed my net id to a 3.5 area, and i got straight in... now i'm running back with version 3.6, i can no longer get debug mode...

spikebaby · 24-04-08, 09:16 PM

plug power lead in whilst holding the down button, ld 14 appears let go and then rehold it will go ld40 then dbug mode

addyb · 24-04-08, 09:33 PM

just tried it mate, just boots normally... u running 3.6 yet?

reddiesel · 25-04-08, 02:50 AM

Sounds like they have done something with the update ?

bodski · 17-05-08, 08:25 PM

Did anyone manage to get into debug mode with 3.6 update?

my box took an update and cant get in debug mode anymore.

23-04-08, 07:39 PM	#1 (permalink)
addyb Member Join Date: Apr 2008 Posts: 48 Thanks: 6 Thanked 0 Times in 0 Posts	debug mode i have a samsung 2100 running version 3.6 software, i follow all the instructions, but what ever i do, it wont go into debug mode... i hold down button in wen i see ld:20, let go wen i see Ld:40... my display goes back to ld:00 and all the way round again, throgh he ld numbers then the PL numbers and finally the through the AP numbers with the light turning green around AP:30 i tried a secong box, also running 3.6 and it does the exact same thing... i know u'll most prob think am doing something wrong, but i really aint... is this because they are running 3.6 firmware? if so, how do i get into debug mode?

23-04-08, 09:03 PM	#2 (permalink)
mancmw Member Join Date: Apr 2008 Posts: 60 Thanks: 3 Thanked 2 Times in 2 Posts	Re: debug mode my samsung did that but when i force updated it then held the down button i got the green light and it worked lol

23-04-08, 10:06 PM	#4 (permalink)
mancmw Member Join Date: Apr 2008 Posts: 60 Thanks: 3 Thanked 2 Times in 2 Posts	Re: debug mode i doubt it will work then but it was what i did on 1 box i forced an update by holding standby left right and ok and the other i disconnected the battery for 5 mins then pluged the box back in and tht one worked

23-04-08, 10:24 PM	#5 (permalink)
addyb Member Join Date: Apr 2008 Posts: 48 Thanks: 6 Thanked 0 Times in 0 Posts	Re: debug mode well i just reset the net id, causing it to run the update again, but still nothing... :s am stuck... has anyone else got a samsung 2100 with 3.6 on it?

24-04-08, 08:58 PM	#6 (permalink)
addyb Member Join Date: Apr 2008 Posts: 48 Thanks: 6 Thanked 0 Times in 0 Posts	Re: debug mode it does seem that 3.6 does not activate 'debug mode' the same way the earlier versions did. i could not get into debug mode at all, so i changed my net id to a 3.5 area, and i got straight in... now i'm running back with version 3.6, i can no longer get debug mode...


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

24-04-08, 09:16 PM	#7 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 979 Thanks: 19 Thanked 143 Times in 136 Posts	Re: debug mode plug power lead in whilst holding the down button, ld 14 appears let go and then rehold it will go ld40 then dbug mode

24-04-08, 09:33 PM	#8 (permalink)
addyb Member Join Date: Apr 2008 Posts: 48 Thanks: 6 Thanked 0 Times in 0 Posts	Re: debug mode just tried it mate, just boots normally... u running 3.6 yet?

25-04-08, 02:50 AM	#9 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 2,565 Thanks: 26 Thanked 173 Times in 162 Posts	Re: debug mode Sounds like they have done something with the update ?

17-05-08, 08:25 PM	#10 (permalink)
bodski Junior Member Join Date: Feb 2008 Posts: 3 Thanks: 1 Thanked 0 Times in 0 Posts	Re: debug mode Did anyone manage to get into debug mode with 3.6 update? my box took an update and cant get in debug mode anymore.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Windows Safe Mode	Annabell	PC Software	2	04-06-08 09:11 PM
I've uploaded the wrong image file	sagemdbox2	DBox	14	28-11-07 03:29 PM
Image flashing problems	phileanne	DBox	3	12-11-07 05:42 PM
Debug mode but cant flash image nokia dbox2	javed	DBox	9	13-08-07 12:31 AM
Program AE mode	DarkDTSHD	Canon Cameras	0	03-04-07 05:31 AM