help - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

rudeboy500 · 24-04-08, 10:41 PM

hi thanks for reading this !!! Really need your help,
I have just aquired a brand new usb infinty card reader+ software by WB Electronics and delivered today .
I have loaded the driver and updated the software to v2.71
Know the tricky bit is put the card into the reader detection came on
it said funcard2 found the chip symbol displayed funcard2 symbol
not phoenix symbol.
What do i do know ?
I have opened file icon to open the flash file changed the file type to
intel hex files (*.hex) there is no flash.hex in file to open just a blank menu
what an i doing wrong
please help
i have read the threads regarding funcard tutorial it starts with phoenix mode then goes on to MKFind
so confused
can someone point me into the right direction with easy steps
sorry i am very new to this!!!!
thanks
rudeboy500

jimbo · 24-04-08, 11:24 PM

was the fun programed before for ur box?

reddiesel · 24-04-08, 11:57 PM

You dont need phoenix mode for a funcard, you need nagra edit 4.1 a rom 11 bin file and au funcard fix for your area, you will find it easier if you open winrar files and extract them to desktop, open nagra edit 4.1 click on open file and find rom image from desktop and load ,click on data editor edit your details bk, ird, you can alter cam id but leave first two digits as is, click on tier 8 and check rights and expire dates are ok, use nagra date to convert, click on file and save to desktop, name file myexteep.bin as you save, go to desktop and then rename file , you remove .bin11 off the end.
open up programmer software load your image to exteep then load your au funcard fix to flash, then write card, some people load and write exteep first then flash, but i havent had a problem writing together, i think it depends on programmer.
All these files are in our downloads.

rudeboy500 · 25-04-08, 09:38 AM

hi jimbo
yes the fun card was programed for my ntl pace box
then the signal went
so instead of paying for it i decided try it out myself
as i said this is the first time i am trying out something like this so really i need to know step by step what to do
thanks
rudeboy

rudeboy500 · 25-04-08, 09:41 AM

hi reddiesel
i'll try what you said step by step
so the first thing to do is load
nagra edit 4.1 a rom 11 bin file
only question is where do i get this file from
thanks
rudeboy 500

reddiesel · 26-04-08, 02:57 AM

Quote:

Originally Posted by rudeboy500

hi reddiesel
i'll try what you said step by step
so the first thing to do is load
nagra edit 4.1 a rom 11 bin file
only question is where do i get this file from
thanks
rudeboy 500

In downloads read the download thread in the sticky for access, or google and download big maq tool bar.

24-04-08, 10:41 PM	#1 (permalink)
rudeboy500 Senior Member Join Date: Apr 2008 Posts: 109 Thanks: 12 Thanked 2 Times in 2 Posts	help hi thanks for reading this !!! Really need your help, I have just aquired a brand new usb infinty card reader+ software by WB Electronics and delivered today . I have loaded the driver and updated the software to v2.71 Know the tricky bit is put the card into the reader detection came on it said funcard2 found the chip symbol displayed funcard2 symbol not phoenix symbol. What do i do know ? I have opened file icon to open the flash file changed the file type to intel hex files (*.hex) there is no flash.hex in file to open just a blank menu what an i doing wrong please help i have read the threads regarding funcard tutorial it starts with phoenix mode then goes on to MKFind so confused can someone point me into the right direction with easy steps sorry i am very new to this!!!! thanks rudeboy500

24-04-08, 11:24 PM	#2 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 4,008 Thanks: 254 Thanked 891 Times in 554 Posts	Re: help was the fun programed before for ur box? __________________ i now keep copies of some posts before they are deleted, this is a private matter.

24-04-08, 11:57 PM	#3 (permalink)
reddiesel Super Moderator Join Date: May 2007 Location: Beds Posts: 5,708 Thanks: 176 Thanked 957 Times in 839 Posts	Re: help You dont need phoenix mode for a funcard, you need nagra edit 4.1 a rom 11 bin file and au funcard fix for your area, you will find it easier if you open winrar files and extract them to desktop, open nagra edit 4.1 click on open file and find rom image from desktop and load ,click on data editor edit your details bk, ird, you can alter cam id but leave first two digits as is, click on tier 8 and check rights and expire dates are ok, use nagra date to convert, click on file and save to desktop, name file myexteep.bin as you save, go to desktop and then rename file , you remove .bin11 off the end. open up programmer software load your image to exteep then load your au funcard fix to flash, then write card, some people load and write exteep first then flash, but i havent had a problem writing together, i think it depends on programmer. All these files are in our downloads.

25-04-08, 09:38 AM	#4 (permalink)
rudeboy500 Senior Member Join Date: Apr 2008 Posts: 109 Thanks: 12 Thanked 2 Times in 2 Posts	Re: help hi jimbo yes the fun card was programed for my ntl pace box then the signal went so instead of paying for it i decided try it out myself as i said this is the first time i am trying out something like this so really i need to know step by step what to do thanks rudeboy

25-04-08, 09:41 AM	#5 (permalink)
rudeboy500 Senior Member Join Date: Apr 2008 Posts: 109 Thanks: 12 Thanked 2 Times in 2 Posts	Re: help hi reddiesel i'll try what you said step by step so the first thing to do is load nagra edit 4.1 a rom 11 bin file only question is where do i get this file from thanks rudeboy 500