Trouble with new firmware for eurovox box

[funkychick2012]

Hi, im having trouble uploading the new firmware for my box. i've downloader the update but when i connect it. its not detecting the receiver. any ideas??

[chancer]

I would surmise it will be something to do with your cable or the port it is plugged into,not being recognized.I`d start there first.

[funkychick2012]

when i go to download it, it comes up
"The receiver was not detected" If you want to download the firmware in boot mode, click ok button below and ac power on your receiver

[hackster]

Im receiving similar trouble

[chancer]

Originally Posted by funkychick2012

when i go to download it, it comes up
"The receiver was not detected" If you want to download the firmware in boot mode, click ok button below and ac power on your receiver

Again i`d still stick with whether the port is being recognized,go to your computer,manage,then device manager and check to see if your port is there etc....After that i`m afraid you will have to hope someone with a bit more knowledge jumps into the thread.

[lucky13]

Chancer's advice is good - the firmware only searches COM Ports 1 thru 4 for the box, so make sure your connection is set to one of these ports.

Also make sure you are using an rs232 NULL MODEM cable as opposed to a standard rs232 serial cable which would never work (wired differently).