Updating Problem - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

fez · 05-05-08, 08:55 PM

I have a DITV 1000 T and I am in a telewest area. I have finally managed to set the net id using libdebug (well I assume so as the net ID has changed in the engineers menu) , but following this I inserted the newly programmed card expecting to update but the screen just stays blank and I am unable to change the channel.

Alternatively I have tried programming a card with netid1.6 and rebooted the box it is saying that the box is being updated and the logo in the bottom right of the screen has changed from ntl to telewest but it just stays as if it is updating saying do not switch off. How long should I give it to update?

I would really appreciate it if anyone can offer any advice on what i maybe doing wrong, I am at my wits end.

Many Thanks

abaaba · 06-05-08, 05:25 AM

Take ur card out, switch the box off wait it for 2-3 minutes then swich back on and give it about 20 minutes, it should work if it doesn't try again and again about 3times that worked 4me just on the weekend.

hope that helps.

card out till u see free channels (ie bbc1 bbc2)

Marc · 06-05-08, 08:33 AM

Was the box originally on telewest?? or has it been taken to ntl and used there ?? if so (hence the ntl spalsh screen) then it wont work in tw unless you remove the chips and flash them with a dump from TW

Marc

fez · 07-05-08, 01:31 AM

Quote:

Originally Posted by cabuukar

Take ur card out, switch the box off wait it for 2-3 minutes then swich back on and give it about 20 minutes, it should work if it doesn't try again and again about 3times that worked 4me just on the weekend.

hope that helps.

card out till u see free channels (ie bbc1 bbc2)

Thanks guys, firstly I will try your idea cabuukar as it sounds simpler but which of the ways I have tried does your suggestion work for the Libdebug or netid funcard?

As stated I have tried both the Libdebug and managed to change the net ID but it just gets stuck updating when I reboot with the newly programmed funcard, alternatively when I try the netid 1.6 it also stuck in an update screen.

Has anyone else had a similar problem if so what was your solution?

Many Thanks.

Marc · 07-05-08, 06:54 AM

What is the answer to the question above yours mate?

Marc

jimbo · 07-05-08, 08:49 AM

fez seems like marc has answered ur problem especialy since u got the nthell logo, think its wrong box, no use trying other things unless u flash the chips.

spikebaby · 07-05-08, 02:40 PM

1000t should work ok in t/w, depending if the stb has had no update mods done to it ...have you tried the 4321 trick

05-05-08, 08:55 PM	#1 (permalink)
fez Member Join Date: Jul 2007 Posts: 83 Thanks: 5 Thanked 1 Time in 1 Post	Updating Problem I have a DITV 1000 T and I am in a telewest area. I have finally managed to set the net id using libdebug (well I assume so as the net ID has changed in the engineers menu) , but following this I inserted the newly programmed card expecting to update but the screen just stays blank and I am unable to change the channel. Alternatively I have tried programming a card with netid1.6 and rebooted the box it is saying that the box is being updated and the logo in the bottom right of the screen has changed from ntl to telewest but it just stays as if it is updating saying do not switch off. How long should I give it to update? I would really appreciate it if anyone can offer any advice on what i maybe doing wrong, I am at my wits end. Many Thanks

06-05-08, 05:25 AM	#2 (permalink)
abaaba Senior Member Join Date: Apr 2008 Location: out of this world Posts: 1,366 Thanks: 223 Thanked 170 Times in 157 Posts	Re: Updating Problem Take ur card out, switch the box off wait it for 2-3 minutes then swich back on and give it about 20 minutes, it should work if it doesn't try again and again about 3times that worked 4me just on the weekend. hope that helps. card out till u see free channels (ie bbc1 bbc2) __________________ All info s 4educational purposes only! La liga, UCL, Kings Cup, Club World Cup, Spanish Super Cup & European Super Cup champions.

06-05-08, 08:33 AM	#3 (permalink)
Marc Underground Crew Member Join Date: Apr 2008 Posts: 647 Thanks: 18 Thanked 182 Times in 143 Posts	Re: Updating Problem Was the box originally on telewest?? or has it been taken to ntl and used there ?? if so (hence the ntl spalsh screen) then it wont work in tw unless you remove the chips and flash them with a dump from TW Marc

07-05-08, 06:54 AM	#5 (permalink)
Marc Underground Crew Member Join Date: Apr 2008 Posts: 647 Thanks: 18 Thanked 182 Times in 143 Posts	Re: Updating Problem What is the answer to the question above yours mate? Marc

07-05-08, 08:49 AM	#6 (permalink)
jimbo Super Moderator Join Date: Aug 2007 Posts: 4,008 Thanks: 254 Thanked 891 Times in 554 Posts	Re: Updating Problem fez seems like marc has answered ur problem especialy since u got the nthell logo, think its wrong box, no use trying other things unless u flash the chips. __________________ i now keep copies of some posts before they are deleted, this is a private matter.

07-05-08, 02:40 PM	#7 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: Updating Problem 1000t should work ok in t/w, depending if the stb has had no update mods done to it ...have you tried the 4321 trick

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone else had this problem after updating firmware??	sajid78	Eurovox	16	15-04-08 02:54 PM
Eurovox Max V 2008 Black - NEW FIRMWARE OUT NOW!	Grav86	Eurovox	61	11-04-08 05:18 PM
Problem in receiving Horizontal frequencies in single solution LNB	arsalanj	Satellite Help	3	04-10-07 12:44 PM
NDS Standard IRD analog audio only problem	beast	Satellite Help	5	09-08-07 06:38 PM
Dun code for windows	Realist	PC Hardware	4	06-03-06 02:36 AM