Unable to get IRD or BK - Techwatch: Satellite TV forums, FTA, Cable, Hardware, & Tech forums

amjreh · 08-05-08, 09:16 PM

Hey,

I have a Pace DI4000-N box and the solderless poo jtag device. Through my laptop ive tried to get the IRD and BK number but have had no luck, using BKE 2.2 it keeps reporting that there's a communication error.

Unfortunately my tower doesnt have a parallel port so had to be done using laptop...I did have the MAC_MOT.sys file loaded and running in the background.

Any ideas on what the problem might be? The pace box is connected and powered by the mains lead, the scart or coaxial aren't plugged in...

spikebaby · 08-05-08, 09:43 PM

firstly edit the config in tools,jtag and edit config 1.. i think with the correct byte for your area, if it is c/w check to see if it is still running on 3.5 and put that byte address in to there ..if you connect it on stream while doing it you will get the correct bk

amjreh · 08-05-08, 10:46 PM

when trying to edit config1 from the tools menu, it keeps crashing out with a runtime error... I do believe i'm in an ex c&w area. Not sure what you mean by 'if its still running on 3.5' and on 'stream to get the correct bk'...

Thanks for the reply

Marc · 09-05-08, 07:03 AM

For a start you dont need to edit the config as the byte location on the pace is the same as it always has been,
Make sure mac mot is running connect your jtag make sure everyting is ready open bke 2.2 choose Jtag>pace4000/4010>connect
You should get the bk and ird come up,
If not try using samsung debug tool and try that,you can use it on pace as well as samsung.

Marc

amjreh · 09-05-08, 09:05 AM

Thanks for clearing that up Marc, ill try that using my brothers PC and see if it works...

amjreh · 09-05-08, 12:20 PM

Managed to get the BK and IRD via my brothers PC.

On to the next step...

Thanks for the advice!!

ouzi1212 · 09-05-08, 03:44 PM

now programme a card with the bk & ird that u got of the box.

amjreh · 09-05-08, 07:02 PM

Yea programmed a funcard and now have it working! So thanks again for the help with that.

Although I have come across a small issue, if I now switch my box to standby and then back on, it comes up with the following message:-

'Sorry, your smartcard isn't inserted properly...' and that it maybe faulty and to check it...

If I then remove the card and reinsert it updates again and then works fine.

Any ideas? Not a major issue but slightly annoying nonetheless.

spikebaby · 09-05-08, 08:38 PM

Quote:

Originally Posted by amjreh

Yea programmed a funcard and now have it working! So thanks again for the help with that.

Although I have come across a small issue, if I now switch my box to standby and then back on, it comes up with the following message:-

'Sorry, your smartcard isn't inserted properly...' and that it maybe faulty and to check it...

If I then remove the card and reinsert it updates again and then works fine.

Any ideas? Not a major issue but slightly annoying nonetheless.

yes its a cam id fault you need to validate the cam id for your area

ouzi1212 · 09-05-08, 08:47 PM

start the cam id with 24 and make the rest up shouldnt be a problem then.

08-05-08, 09:16 PM	#1 (permalink)
amjreh Junior Member Join Date: Apr 2008 Posts: 9 Thanks: 2 Thanked 0 Times in 0 Posts	Unable to get IRD or BK Hey, I have a Pace DI4000-N box and the solderless poo jtag device. Through my laptop ive tried to get the IRD and BK number but have had no luck, using BKE 2.2 it keeps reporting that there's a communication error. Unfortunately my tower doesnt have a parallel port so had to be done using laptop...I did have the MAC_MOT.sys file loaded and running in the background. Any ideas on what the problem might be? The pace box is connected and powered by the mains lead, the scart or coaxial aren't plugged in...

08-05-08, 09:43 PM	#2 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 981 Thanks: 19 Thanked 145 Times in 138 Posts	Re: Unable to get IRD or BK firstly edit the config in tools,jtag and edit config 1.. i think with the correct byte for your area, if it is c/w check to see if it is still running on 3.5 and put that byte address in to there ..if you connect it on stream while doing it you will get the correct bk

08-05-08, 10:46 PM	#3 (permalink)
amjreh Junior Member Join Date: Apr 2008 Posts: 9 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Unable to get IRD or BK when trying to edit config1 from the tools menu, it keeps crashing out with a runtime error... I do believe i'm in an ex c&w area. Not sure what you mean by 'if its still running on 3.5' and on 'stream to get the correct bk'... Thanks for the reply

09-05-08, 07:03 AM	#4 (permalink)
Marc Underground Crew Member Join Date: Apr 2008 Posts: 419 Thanks: 6 Thanked 91 Times in 82 Posts	Re: Unable to get IRD or BK For a start you dont need to edit the config as the byte location on the pace is the same as it always has been, Make sure mac mot is running connect your jtag make sure everyting is ready open bke 2.2 choose Jtag>pace4000/4010>connect You should get the bk and ird come up, If not try using samsung debug tool and try that,you can use it on pace as well as samsung. Marc

09-05-08, 09:05 AM	#5 (permalink)
amjreh Junior Member Join Date: Apr 2008 Posts: 9 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Unable to get IRD or BK Thanks for clearing that up Marc, ill try that using my brothers PC and see if it works... Last edited by amjreh : 09-05-08 at 12:20 PM.


Technology Forums: FTA, Satellite, Cable, Home Media, Hardware & Computers \| Home \| Forums \| News \| Blog \|

09-05-08, 12:20 PM	#6 (permalink)
amjreh Junior Member Join Date: Apr 2008 Posts: 9 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Unable to get IRD or BK Managed to get the BK and IRD via my brothers PC. On to the next step... Thanks for the advice!!

09-05-08, 03:44 PM	#7 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 605 Thanks: 5 Thanked 120 Times in 116 Posts	Re: Unable to get IRD or BK now programme a card with the bk & ird that u got of the box.

09-05-08, 07:02 PM	#8 (permalink)
amjreh Junior Member Join Date: Apr 2008 Posts: 9 Thanks: 2 Thanked 0 Times in 0 Posts	Re: Unable to get IRD or BK Yea programmed a funcard and now have it working! So thanks again for the help with that. Although I have come across a small issue, if I now switch my box to standby and then back on, it comes up with the following message:- 'Sorry, your smartcard isn't inserted properly...' and that it maybe faulty and to check it... If I then remove the card and reinsert it updates again and then works fine. Any ideas? Not a major issue but slightly annoying nonetheless.

09-05-08, 08:47 PM	#10 (permalink)
ouzi1212 Senior Member Join Date: Mar 2008 Posts: 605 Thanks: 5 Thanked 120 Times in 116 Posts	Re: Unable to get IRD or BK start the cam id with 24 and make the rest up shouldnt be a problem then.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unable to drag shortcuts around the desktop	burnleyfan	PC Software	1	17-04-08 01:30 PM
Unable to find channel	hairnomore	Cable TV Chat	3	09-03-08 08:08 AM
Eurovox 2008 Model unable to find any channels	abbas_ali	Eurovox	9	15-11-07 09:24 PM
unable to receive some channels	madbiker1888	Cable TV Chat	4	04-11-07 01:27 PM
Probs setting up mythtv	jontydog	MythTV	36	27-08-06 07:15 PM