bit stuck here guys any help thanks

[dek007]

hi people running sportster pro 1.02 on d box 2 was working fine rescanned the channels to get the channels l nvr had got all the channles that l wanted now lm getting frezzing on just a few channels like bbc1 and stv bbc 2 they were fine before l scanned the box
most channels work fine no frezzing at all but the ones that are are that bad there unwatchable tryed rescanning it agian but still no luck any ideas guys thanks for ure time

[BelgyFaeEK]

There can be a few reasons for this, try changing the u-codes, or tell us what your ber snr readings are etc depends on what signal strength you have coming in, how many splitters you have before the box etc, can be a process of elimination.

[dek007]

hi belgyfaek thanks for ure time m8 right lm not a wizard at this stuff so will try me best found the u-codes and under them was this avia 600vb022
avia 500v110
cam_01_01_002e
ucode_0014
if that helps
found the singals
ber 26214 on the channels that are bad good channels are about 90
snr over 60000
sig 34000
so ber should be a lot lower l gess any ideas how to fix that think that the problem
not sure how to change u_codes any l only have a direct feed to the box no spliters signal allwas been good had it running for about 2 years now with no probs

[BelgyFaeEK]

does seem strange mate, normally pixelation occurs when the signal is weaker on these channels, are you in a digital or analogue area?

I know my box woeks better on ucode 001a - a nokia since the au change

Have you been using the same image all that time? try going into blue button menu and tring different ucodes, also try change to evocamd, only that and one other cam seem to work properly.

Try changing the ucodes first. only do one change at a time. If that doesnt help let me know and I will dredge my memory, lol busted my box 2 weeks ago awaiting a new one

[dek007]

l got it m8 the problem was l snapped the antener bit off my box and got it resolderd on but the guy nvr put the plate back on cos of all the solder he just put the top on the dbox he just put it in the bag tryed putting it back on and it worked must of been getting interfence from the dbox thanks for all ure help m8 hope u get ure box soon