Unlocking and reading rom11 HELP NEEDED!!!

[imybash]

Hello all,

After reciving my unlooper from chartman (tiny Unlooper) i decided to have a go at unlocking a few of my old rom11 and rom10 cards. But i seam to be having problems.

I have ran the (MIKEDATA & CHARTMAN A86 AND BOD SCRIPT MAY 2007 A86) Script which was supplied with the unlooper, after 14 minutes the script said your card should be unlocked or somthing, but when i try and read my card using a Infinity USB Unlimted programmer and NagraEdit 4.1 i get the following error!

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 5*
CamID: 27 ** A0 63
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Reading ROM11 failed
Closing of COM1 was successful

Any advice or help would be welcomed, also i would like to know how i set the pot on the unlooper and the vcc floor and ceiling???

thanks

[bramleyandy]

try cleaning the chip on the card mate if not read it in xns or rom studio then mron it settings 350 100 350 works fine for me mate no joy just give me a shout

[spikebaby]

does a box not popp up asking for bd keys, if so dump the card using xncs

line co4o and line co7o bd keys

[imybash]

Nope? nothing appears i think i need to set the pot? when i bought the unlooper i got a small peice of paper with is saying set the vcc floor to ceiling of around 1a-1b using Vccanalyser.xvb? How do i go around doing this? Could someone please explain?

Thanks guyz your help is much appreciated!

[reddiesel]

Originally Posted by imybash

Nope? nothing appears i think i need to set the pot? when i bought the unlooper i got a small peice of paper with is saying set the vcc floor to ceiling of around 1a-1b using Vccanalyser.xvb? How do i go around doing this? Could someone please explain?

Thanks guyz your help is much appreciated!

I thought you said it was unlocked ?
Download vcc analyser from our downloads, use it in winexplorer, run the same as a script, you adjust pot screw to get -------------- straight without any ++ at 1a - 1b you will see when you do it, there is a tut with it.

[imybash]

Originally Posted by reddiesel

I thought you said it was unlocked ?
Download vcc analyser from our downloads, use it in winexplorer, run the same as a script, you adjust pot screw to get -------------- straight without any ++ at 1a - 1b you will see when you do it, there is a tut with it.

Hello, i cant find the link for the downloads? dont think iv ever used the download section on this forum? thanks for the info.

[reddiesel]

Originally Posted by imybash

Hello, i cant find the link for the downloads? dont think iv ever used the download section on this forum? thanks for the info.

If you click on uk cable thread at top of page scroll down to cable section you will see private fta in download post by lincsat you will get link and password, sorry no live links allowed.

[imybash]

Hi reddiesel,
could you pleas have a look at this picture i have attached? is the pot set to 1A-1B?

[reddiesel]

Yes that looks about right mate.

[spikebaby]

the pot settings look correct and will open the rom 11, 1A is ideal for for rom 10, what flash is the unlooper running do you know,as you get better results with different flashes