underworld109

[rainforest125]

Good morning.Could anybody help.Put 109 on my cam yesterday but it will not get any premiere channels.Any ideas?

Thanks

[Mickha]

Hi rainforest125,
I have just tried Underworld 109 and it does AU on Premiere.
Which version of the cam have you got, the 2.2 or newer 2.3 model?
Go into the Cams menu, using your receivers remote control or your Cas 3.
To do this using the Cas 3, insert your cam, start up the software, click on the Utilities tab, top right hand side, and click on Common Interface Host.
Enter Underworld 109, then enter the Configuration folder and ensure you have the following settings.
Auto PMT ON
Emulators ON
N2 AU ON
Emulators priority 1 Emu 2 Card
Then go to any Premiere channel, 19E, like Premiere 1, details of which can be located here:
_http://www.lyngsat.com/packages/premiere.html
After a minute you should see the smartcard message keys have expired, leave it for 5 minutes and the keys should auto update.
If it still doesn't open check that you have got the correct channels, and PIDS, scanned into your receiver.
If still having problems try formatting your cam and re-loading Underworld 109.
Insert your cam and start up the Cas software.
Click on Cam Module and the 2 Diablo Cam icons.
Now click on the Cam Disk Functions tab and format.
Once format is complete, click on the Upgrade Cam tab and load Underworld 109, then alter the configuration settings to as above.
Please post back with the results.

[rainforest125]

Hi Mickha

My aid in a sea of technology yet again.Many thanks followed your instructions premier fine after about 3 mins.Your becoming my hero.Cheers

[Mickha]

Do you have the 2.3 version of the Cam?
With Underworld 109 you can currently get all these packages:
_http://www.lyngsat.com/packages/premiere.html
_http://www.lyngsat.com/packages/digitalb.html
_http://www.lyngsat.com/packages/tps.html
_http://www.lyngsat.com/packages/polsat.html
_http://www.lyngsat.com/packages/canaldigital.html
_http://www.lyngsat.com/packages/digi.html
It could take you all day to scan them in and sort you favourites, never mind viewing anything.

[rainforest125]

yes I have 2.3 cam only a couple of weeks old as is programmer.sorry but what do you mean by scan them all in and what are all the http addresses for?Sorry to be a pain just a learner.

[Mickha]

The addresses are all to lyngsat, and pages listing every channel in the packages currently open to you, using the Diablo Cam.
Premiere 19E
DigitAlb 16E
TPS and Polsat 13E
Digi TV and Canal Digital 1W
There are a lot of big packages in that list carrying a lot of channels.
Just copy and paste the links, one at a time, into your browser, minus the underscore _, and take a look at what you can view.