Using Tiny Unlooper - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Ciwan · 16-05-08, 11:07 PM

Hi Guys

I got my Tiny Unlooper through the post today. This is going to be my first time EVER using an Unlooper, SO I would be VERY GREATFUL if someone can walk me through/ Provide Tutorial on how I can extract the Box Key and IRD from the V+ Paired Card.

Thanks Guys

PS. If there are things that I shouldn't do (i.e. things that will destory the card forever) please tell me !!

Thanks !

Ciwan · 17-05-08, 06:45 PM

hello ??

spikebaby · 17-05-08, 06:58 PM

has your tiny unlooper been flashed if so what with, tiny flash rx11 rsx11 newd11 new d11x etc

open the script in winexplorer, and check settings in configure to run with the script, save thenrun script. await results

run the mikedata bod and 10a86 script,

Ciwan · 17-05-08, 07:04 PM

I don't know if it has been flashed or not !! How can I find out ??

I used Sidewinder Unlocker and here is what I got !

Thanks Spike

afcwomble · 17-05-08, 07:11 PM

Your card should now be glitched open-try reading in Nagra or XNCS and see what you get.

Ciwan · 17-05-08, 07:13 PM

sorry afcwomble I don't understand what you mean, the fault is not with your post > its with me, it is my first time using an unlooper

So are you saying Sidewinder unlocker has now removed the lock on my Rom11 RevBOD ?? and now my card can be read in NagraEdit 4.1 ???

Note: I ran Sidewinder unlocker a 2nd time after the screenshot you see above, and 2nd time I didn't get same thing !

Thanks Guys

afcwomble · 17-05-08, 07:36 PM

Yes mate-sidewinder has unlocked it for you so you should have an open card now-the reason you have IRD as 9D9DCD45 is because you ran it again. You can get the IRD from the box but the BK should still be OK when you read it in Nagraedit 4.1 as you say.

Ciwan · 17-05-08, 07:37 PM

OK let me go and read it in NagraEdit 4.1 with Phenoix mode.

I'll BRB

Ciwan · 17-05-08, 07:54 PM

OK I've just put the Infinity USB Unlimited into Pheonix mode with these settings >>

Then I opened up NagraEdit 4.1 and click on the Read from Card button and here is what I got

Please help

afcwomble · 17-05-08, 07:57 PM

You need to put it into VCP mode-In the Infinity USB progrmme click on Tools and it will show "Virtual Com Port(VCP Mode)", set it to that and make sure your com port is set same as Nagraedit(Com2 from the look of it)

Edit: The page you have up on right is correct-click enable. Make sure com port is same as said

16-05-08, 11:07 PM	#1 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Using Tiny Unlooper Hi Guys I got my Tiny Unlooper through the post today. This is going to be my first time EVER using an Unlooper, SO I would be VERY GREATFUL if someone can walk me through/ Provide Tutorial on how I can extract the Box Key and IRD from the V+ Paired Card. Thanks Guys PS. If there are things that I shouldn't do (i.e. things that will destory the card forever) please tell me !! Thanks !

17-05-08, 06:45 PM	#2 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Using Tiny Unlooper hello ??

17-05-08, 06:58 PM	#3 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: Using Tiny Unlooper has your tiny unlooper been flashed if so what with, tiny flash rx11 rsx11 newd11 new d11x etc open the script in winexplorer, and check settings in configure to run with the script, save thenrun script. await results run the mikedata bod and 10a86 script,

17-05-08, 07:04 PM	#4 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Using Tiny Unlooper I don't know if it has been flashed or not !! How can I find out ?? I used Sidewinder Unlocker and here is what I got ! Thanks Spike

17-05-08, 07:11 PM	#5 (permalink)
afcwomble Senior Member Join Date: May 2008 Posts: 357 Thanks: 15 Thanked 53 Times in 52 Posts	Re: Using Tiny Unlooper Your card should now be glitched open-try reading in Nagra or XNCS and see what you get.

17-05-08, 07:13 PM	#6 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Using Tiny Unlooper sorry afcwomble I don't understand what you mean, the fault is not with your post > its with me, it is my first time using an unlooper So are you saying Sidewinder unlocker has now removed the lock on my Rom11 RevBOD ?? and now my card can be read in NagraEdit 4.1 ??? Note: I ran Sidewinder unlocker a 2nd time after the screenshot you see above, and 2nd time I didn't get same thing ! Thanks Guys

17-05-08, 07:36 PM	#7 (permalink)
afcwomble Senior Member Join Date: May 2008 Posts: 357 Thanks: 15 Thanked 53 Times in 52 Posts	Re: Using Tiny Unlooper Yes mate-sidewinder has unlocked it for you so you should have an open card now-the reason you have IRD as 9D9DCD45 is because you ran it again. You can get the IRD from the box but the BK should still be OK when you read it in Nagraedit 4.1 as you say.

17-05-08, 07:37 PM	#8 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Using Tiny Unlooper OK let me go and read it in NagraEdit 4.1 with Phenoix mode. I'll BRB

17-05-08, 07:54 PM	#9 (permalink)
Ciwan Senior Member Join Date: Jun 2007 Location: My Bedroom Posts: 894 Thanks: 6 Thanked 9 Times in 9 Posts	Re: Using Tiny Unlooper OK I've just put the Infinity USB Unlimited into Pheonix mode with these settings >> Then I opened up NagraEdit 4.1 and click on the Read from Card button and here is what I got Please help

17-05-08, 07:57 PM	#10 (permalink)
afcwomble Senior Member Join Date: May 2008 Posts: 357 Thanks: 15 Thanked 53 Times in 52 Posts	Re: Using Tiny Unlooper You need to put it into VCP mode-In the Infinity USB progrmme click on Tools and it will show "Virtual Com Port(VCP Mode)", set it to that and make sure your com port is set same as Nagraedit(Com2 from the look of it) Edit: The page you have up on right is correct-click enable. Make sure com port is same as said

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
unlooper ? for rom 11	alder191	Cable TV Chat	64	21-10-09 02:21 PM
unlooper question	sharkbait559	Cable TV Chat	1	05-04-08 02:24 AM
T911 cyclone red unlooper dip switches	Tezza1	Cable TV Chat	5	06-11-07 03:31 PM
Unlooper	gordongop	Cable TV Chat	3	12-10-07 03:02 PM
Tiny Pop +1 28E	Analoguesat	28E - Astra 2 / Eurobird 1	1	16-07-07 12:20 PM