Confirm Install settings before I go ahead - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

joebhoy · 21-05-08, 05:42 PM

Ok.. got the brakets up on the wall and the pole mount vertical as required.

.
Just need to clear up the settings for motor.

This is my settings :
Lat:55:50:07N (55.83526) Lon:4:21:21W (-4.35589)Now - i;ve set the motor to latitude 56. (see image)
And i've set the dish incline to 25. Is this correct before I throw the dish onto the motor. Also, I assume the lnb goes is installed as in the 2nd image.
Jeeesus.. I'm flying by the seat of my pants here

Robbo · 21-05-08, 05:47 PM

Hi mate,
Errm, You got the motor on upside down.

The connectors should be on the underside.

I can't see the motor setting but if it is 56 then it's OK,

As for the dish, I would refer to your manual, but once put on the motor it the dish face should be roughly vertical.

You are going to have to adjust it anyway, once you have sent the dish using USALS to 5W. (should be very close to zero on the motor)

The LNB looks right I think, the connector should point down, once up.
That is an Orbital dish, isn't it?

Robbo

joebhoy · 21-05-08, 05:55 PM

yeah - its an orbital dish. Feck - cant believe its upside down.

Feck feck feck. OK - i'll get it down and feck about with it till its right.
Cheers for quick response - update coming soon

joebhoy · 21-05-08, 06:52 PM

Ok - see where I went wrong. I was watching that youtube vide for installing and their dish motor was like that. Think i'll just attach it to the dish first then put it up - might be easier than stretching over with the dish. Any idea what this is for ?

http://img376.imageshack.us/img376/8248/dsc00185dt5.jpg

Robbo · 21-05-08, 07:22 PM

Quote:

Originally Posted by joebhoy

Ok - see where I went wrong. I was watching that youtube vide for installing and their dish motor was like that. Think i'll just attach it to the dish first then put it up - might be easier than stretching over with the dish. Any idea what this is for ?

http://img376.imageshack.us/img376/8248/dsc00185dt5.jpg

It's for an LNB with a thin stem

.

I have one just like it

You don't need it for the standard 40mm neck LNBs.

Robbo

SAT-WORLD · 22-05-08, 11:32 PM

Its for 22mm collar lnbs,as Robbo,has already said.
There are motors with upward stubs,but not in your case

joebhoy · 23-05-08, 07:09 AM

Damn. I think I overtightened the collar round the lnb - one side of it has cracked at the screw. Still seems tight right enough. Will stikc the dish up tonight hopefully.

Joe.

21-05-08, 05:42 PM	#1 (permalink)
joebhoy Member Join Date: Dec 2007 Posts: 97 Thanks: 9 Thanked 2 Times in 2 Posts	Confirm Install settings before I go ahead Ok.. got the brakets up on the wall and the pole mount vertical as required. . Just need to clear up the settings for motor. This is my settings : Lat:55:50:07N (55.83526) Lon:4:21:21W (-4.35589)Now - i;ve set the motor to latitude 56. (see image) And i've set the dish incline to 25. Is this correct before I throw the dish onto the motor. Also, I assume the lnb goes is installed as in the 2nd image. Jeeesus.. I'm flying by the seat of my pants here

21-05-08, 05:47 PM	#2 (permalink)
Robbo Satellite mad Join Date: Jul 2007 Location: Kent Posts: 9,374 Thanks: 97 Thanked 1,981 Times in 1,603 Posts	Re: Confirm Install settings before I go ahead Hi mate, Errm, You got the motor on upside down. The connectors should be on the underside. I can't see the motor setting but if it is 56 then it's OK, As for the dish, I would refer to your manual, but once put on the motor it the dish face should be roughly vertical. You are going to have to adjust it anyway, once you have sent the dish using USALS to 5W. (should be very close to zero on the motor) The LNB looks right I think, the connector should point down, once up. That is an Orbital dish, isn't it? Robbo __________________ القمر الصناعي هو أفضل TM600 linux,TM6800HD,TM5200,TM1000,TM2200 motor, Triax TD110 dish. Electronics Engineer and satellite installer.MBC Satellites Last edited by Robbo; 21-05-08 at 05:50 PM.

21-05-08, 05:55 PM	#3 (permalink)
joebhoy Member Join Date: Dec 2007 Posts: 97 Thanks: 9 Thanked 2 Times in 2 Posts	Re: Confirm Install settings before I go ahead yeah - its an orbital dish. Feck - cant believe its upside down. Feck feck feck. OK - i'll get it down and feck about with it till its right. Cheers for quick response - update coming soon

21-05-08, 06:52 PM	#4 (permalink)
joebhoy Member Join Date: Dec 2007 Posts: 97 Thanks: 9 Thanked 2 Times in 2 Posts	Re: Confirm Install settings before I go ahead Ok - see where I went wrong. I was watching that youtube vide for installing and their dish motor was like that. Think i'll just attach it to the dish first then put it up - might be easier than stretching over with the dish. Any idea what this is for ? http://img376.imageshack.us/img376/8248/dsc00185dt5.jpg

22-05-08, 11:32 PM	#6 (permalink)
SAT-WORLD Senior Member Join Date: May 2006 Posts: 3,664 Thanks: 19 Thanked 246 Times in 215 Posts	Re: Confirm Install settings before I go ahead Its for 22mm collar lnbs,as Robbo,has already said. There are motors with upward stubs,but not in your case

23-05-08, 07:09 AM	#7 (permalink)
joebhoy Member Join Date: Dec 2007 Posts: 97 Thanks: 9 Thanked 2 Times in 2 Posts	Re: Confirm Install settings before I go ahead Damn. I think I overtightened the collar round the lnb - one side of it has cracked at the screw. Still seems tight right enough. Will stikc the dish up tonight hopefully. Joe.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
unlooper ? for rom 11	alder191	Cable TV Chat	64	21-10-09 01:21 PM
Need help unlocking 2 phones D:	DrakasX	Unlocking	4	19-01-07 04:42 AM
Self Install adsl	Realist	Broadband	0	23-04-06 08:17 PM
DreamSet V1.64 - Dreambox settings editor	BGonaSTICK	Dreambox	0	04-03-06 09:39 PM
Settings For WAp / GPRS All Networks	Realist	Unlocking	0	18-09-05 11:40 AM