Sammy 2110 stuck in update loop! - Techwatch Support Forums: Digital & Satellite TV, FTA, Cable, Computers, Mobile Phones, Apple and General Tech Forums

Stevo86 · 22-05-08, 10:11 PM

I have a samsung 2110 that seems to be stuck in an update loop.

I've tried a master reset but the box still tries to take the update.

I cant get into the engineers menu as the update begins rolling before loading the menu.

does anyone know how i can get round this?

Thanks,
Steve.

bodski · 22-05-08, 10:34 PM

Try taking the feed off the box and try getting into the engineers menu.
The network ID may be different from the area your in.

rizlaman · 23-05-08, 12:12 AM

Quote:

Originally Posted by bodski

Try taking the feed off the box and try getting into the engineers menu.
The network ID may be different from the area your in.

Same problem here mate since yesterday i did the above took feed out changed net id feed back in all was working hour later started again repeated again then it did again only since new softwear yesterday not sure wat to do.

spikebaby · 23-05-08, 06:27 AM

have you tried reconnecting tb let it take the update then disconnect again

Stevo86 · 23-05-08, 06:28 AM

I've taken the feed of but still cant get into the engineers menu as after a rebot with the up and down held in the box doesn't load past 20.

any other ways?

Stevo86 · 23-05-08, 06:38 AM

Quote:

Originally Posted by spikebaby

have you tried reconnecting tb let it take the update then disconnect again

Na, not tried that will give it ago and let u know

spikebaby · 23-05-08, 07:23 PM

the net id fun method use to take the pace stbs out of a loop try it on the 2110 and see if it works that way

Stevo86 · 24-05-08, 12:14 PM

Quote:

Originally Posted by spikebaby

the net id fun method use to take the pace stbs out of a loop try it on the 2110 and see if it works that way

Could u explain this method please Spike, is it different to a normal net id, pin change using a fun card.

the biggest problem ive got is i cant get into the engineers menu.

thanks.

Stevo86 · 25-05-08, 02:01 PM

Just to let everyone know i've managed to get the box out of loop.

I swapped the Atmel chip with one from a good box from my area, the box booted up and took the update ok. I've done a fun net id change, and the box works ok.

I put the Atmel from the bad box onto the good, and this box is working ok too.

22-05-08, 10:11 PM	#1 (permalink)
Stevo86 Senior Member Join Date: Jan 2008 Posts: 127 Thanks: 3 Thanked 0 Times in 0 Posts	Sammy 2110 stuck in update loop! I have a samsung 2110 that seems to be stuck in an update loop. I've tried a master reset but the box still tries to take the update. I cant get into the engineers menu as the update begins rolling before loading the menu. does anyone know how i can get round this? Thanks, Steve.

22-05-08, 10:34 PM	#2 (permalink)
bodski Junior Member Join Date: Feb 2008 Posts: 3 Thanks: 1 Thanked 0 Times in 0 Posts	Re: Sammy 2110 stuck in update loop! Try taking the feed off the box and try getting into the engineers menu. The network ID may be different from the area your in.

23-05-08, 06:27 AM	#4 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: Sammy 2110 stuck in update loop! have you tried reconnecting tb let it take the update then disconnect again

23-05-08, 06:28 AM	#5 (permalink)
Stevo86 Senior Member Join Date: Jan 2008 Posts: 127 Thanks: 3 Thanked 0 Times in 0 Posts	Re: Sammy 2110 stuck in update loop! I've taken the feed of but still cant get into the engineers menu as after a rebot with the up and down held in the box doesn't load past 20. any other ways?

23-05-08, 07:23 PM	#7 (permalink)
spikebaby Underground crew member Join Date: Dec 2007 Posts: 1,541 Thanks: 38 Thanked 290 Times in 238 Posts	Re: Sammy 2110 stuck in update loop! the net id fun method use to take the pace stbs out of a loop try it on the 2110 and see if it works that way

25-05-08, 02:01 PM	#9 (permalink)
Stevo86 Senior Member Join Date: Jan 2008 Posts: 127 Thanks: 3 Thanked 0 Times in 0 Posts	Re: Sammy 2110 stuck in update loop! Just to let everyone know i've managed to get the box out of loop. I swapped the Atmel chip with one from a good box from my area, the box booted up and took the update ok. I've done a fun net id change, and the box works ok. I put the Atmel from the bad box onto the good, and this box is working ok too.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to update sammy 2100	slacky	Cable TV Chat	24	31-07-09 12:31 PM
Lost channels & stuck on data update	Esm	Starview	55	18-05-08 04:40 AM
sammy 2110	ulfbaz	Cable TV Chat	9	17-05-08 10:57 PM
virgin media sammy 2110 weird problem	rizla83	Cable TV Chat	9	28-04-08 09:21 AM
update 2110 netid with funcard	sal	Cable TV Chat	3	17-04-08 06:08 PM